Synthesis and Crystal Structure of 9-（ 4-M e tho xylphen yl ）-1,8-dioxo-3,4,5,6,7,9hexahydroxanthene under Microwave Irradiation

1INTRODUCTIONInthepastfewyears,potassiumchannelacti-vatorshavegainedincreasingattentionbecauseoftheirclinicalpotentialapplicationsinvariousdiseases.Oneofthemostpotentcompoundsamongthisnewclassofdrugsisthebenzopyranderivativecroma-kalim[1～4].Benzopyranaswellasitsderivativesex-hibitsextensivepharmacologicalandbiologicalacti-vities[5],suchasantibacterialactivities[6,,antitumor7]activity[8],hypotensiveeffect[9],antiproliferationef-fect[10],etc.Thetitlecompoundbearingabenzo-pyranstructuraluni…     

Decomposition of Transformer Oil Under Ultrasonic Irradiation During Degassing Process

In the degassing process of transformer oil with ultrasonic waves ,decompostition of the oil was observed.Light hydrocarbons,including methane,ethane,ethylene ,aceylene,propane etc,were found to be released continuously from the oil into headspace within a closed vial placed in an ultrasonic field ,The gases came from decomposition of hydrocarbon molecules under cavitation effect.     

伯溴代烷的微波快速合成法

198 6年Ｒ .Ｊ.Ｇｉｇｎｅｒｅ[1 ] 和Ｒ .Ｇｅｄｙｅ[2 ] 首次报道将微波用于有机合成反应以来 ,大量实验事实证明[3] 微波不仅能极大地提高某些化学反应速率 ,而且能使一些在常规加热条件下几乎不能进行的反应得以完成、获得满意的收率。用伯醇在溴化氢溶液中微波条件下发生反应制备了伯溴代烷。1　实验部分ＷｈｉｒｌｐｏｏｌＴ1 2 0Ｘ微波炉 (四川大学无线电系改装 ,可连续发射微波 ,功率连续可调 )、ＷＺＳ -Ｉ阿贝折光仪 (未校正 )。工业溴化氢 (Ｃ =40 % ,ｄ =1 38) ,其余试剂均为ＣＰ级。合成通法　将适量的醇、一定量的浓硫酸和过…     

Thermal and mechanical properties of UV irradiated collagen/chitosan thin films

The thermal and mechanical properties of collagen/chitosan blends before and after UV irradiation have been investigated using thermal analysis and mechanical (Instron) techniques. Comparisons were made with the thermal and mechanical properties of both collagen and chitosan films. Air-dried collagen, chitosan and collagen/chitosan films were exposed to UV irradiation (wavelength 254 nm) for different time intervals. Thermal properties of collagen/chitosan blends depend on the composition of the blend and are not significantly altered by UV irradiation.Mechanical properties such as ultimate tensile strength and ultimate percentage of elongation were much better for collagen films than for collagen/chitosan films. The results have shown that the mechanical properties of the blends were greatly affected by the duration of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the blend. Increasing UV irradiation leads to an increase in Young's modulus of the collagen/chitosan blend.     

Microwave synthesis,characterization and catalytic properties of titanium-incorporated ZSM-5 zeolite

Titanium-incorporated ZSM-5 zeolites (Si/Al = 50–200 and Si/Ti = 70) were successfully synthesized in a one-step sol-gel process under microwave irradiation. The characteristics of Ti-ZSM-5 zeolites were investigated using X-ray power diffraction, UV/Vis-DRS, FT-IR spectroscopy and solid-state ²⁷Al-NMR to monitor the physico-chemical properties. Simultaneously, the acidic properties were characterized by the NH₃-TPD profile. The characterization results revealed that the Ti⁴⁺ and Al³⁺ ions were well incorporated into the framework of Ti-ZSM-5 zeolite. The prepared zeolite was moderately active but selective in the dehydration of methanol to dimethyl ether.     

超声波作用下羰基化合物的还原偶联反应

超声波在一些有机反应中有明显的促进作用「“，Luche等认为超声波的作用有两种主要类型［’j．一类是涉及电子转移的自由基或离子一自由基型反应，由于超声波的空化作用所产生的局部高温高压可以促进电子转移，从而明显地加快反应速度；对大多数离子型反应，超声波只能起到机械的物理作用．我们曾报道偕二卤化合物在Li、Na、Mg等金属作用下产生卡宾的反应是单电子转移过程，该反应可由于超声辐射而大大加速［‘］；而在芳基叔脚的断裂反应中，超声波可以促进三苯基俄与金属馊反应生成二苯基脚负离子，但对它进一步的亲核取代反应却没有明…     

Genotoxic properties of 2-dodecylcyclobutanone, a compound formed on irradiation of food containing fat

When food containing fat is treated by ionizing radiation, a group of 2-alkylcyclobutanones is formed. These components contain the same number of carbon atoms as their precursor fatty acids and the alkyl group is located in ring position 2. Thus, from palmitic acid 2-dodecylcyclobutanone is derived. To date, there is no evidence that the cyclobutanones occur in unirradiated food. Therefore, these components cannot be considered inherent to food, and for questions pertaining to risk assessment of irradiated food it would be advisable to determine the genotoxic and toxic potentials of cyclobutanones. Measurements of DNA damage in cells exposed to 2-dodecylcyclobutanone, employing the single cell microgel electrophoresis technique, have been carried out. In vitro experiments using rat and human colon cells indicate that 2-docylcyclobutanone in the concentration range of about 0.30 – 1.25 mg/ml induces DNA strand breaks in the cells. Simultaneously, a concentration related cytotoxic effect is observed as was determined by trypan blue exclusion. To which extent these in vitro findings are of relevancy for the in vivo human exposure situation needs to be investigated in further studies. In vivo tests in rats are in progress.     

Application of divergent multi-component reactions in the synthesis of a library of peptidomimetics based on γ-amino-α,β-cyclopropyl acids

The multi-component condensation of organozirconocene, aldimine and zinc carbenoid was applied to the stereoselective synthesis of cyclopropane amino acid derivatives. These compounds served as scaffolds for the preparation of a 46-member library. The C- and N-termini of the cyclopropane amino acid derivatives were diversified by condensations with ten amines and ten acylating agents, respectively. To improve yields and accelerate library synthesis, most products were prepared under microwave irradiation and purified by polymer-bound scavengers and SPE methodology. All compounds were analyzed by LC-MS and a representative selection was fully characterized.     

A polymeric photobase generator containing oxime–urethane groups: Crosslinking reaction and application to negative photoresist

A polymeric photobase generator containing oxime–urethane groups was prepared by copolymerization of methyl methacrylate and methacryloxyethyl benzophenoneoxime urethane, and its photo and thermal crosslinking reaction after irradiation was examined from the measurement of UV and IR absorption spectral changes, insoluble fraction, and molecular weight changes. The photo‐crosslinking reaction of the copolymer film was more efficient when irradiations were carried out with 310 nm UV light in the presence of benzophenone than with 254 nm UV light without the addition of benzophenone. The crosslinking reaction increased after postexposure baking (PEB), and this thermal crosslinking reaction mechanism was studied from the identification of the photolysis products of a model compound, benzophenoneoxime phenylurethane, by a high‐performance liquid chromatography. The results indicate that the thermal crosslinking reaction of the copolymer after PEB is due to the formation of urea‐type chemical bonds. Resist properties of the copolymer were examined from the measurement of normalized thickness and micropattern development. A negative tone image with a resolution of 2 μm was obtained with this copolymer, having a sensitivity (D) of 1200 mJ/cm² and contrast (γ_n) of 1.31, when irradiation was carried out with 310 nm UV light in the presence of benzophenone following chloroform development. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 975–984, 2004     

Microwave-assisted Suzuki-Miyaura and Heck-Mizoroki cross-coupling reactions of aryl chlorides and bromides in water using stable benzothiazole-based palladium(II) precatalysts

The catalytic activity of benzothiazole-based Pd(II)-complexes was evaluated in Suzuki-Miyaura and Heck-Mizoroki C-C cross-coupling reactions of aryl chlorides and bromides with olefins and arylboronic acids both under thermal as well as microwave irradiation conditions in water. The factors affecting the optimization of such reactions as well as the reusability of the Pd-precatalysts are studied.