Rapid screening of selective serotonin re-uptake inhibitors in urine samples using solid-phase microextraction gas chromatography–mass spectrometry

In this paper a solid-phase microextraction–gas chromatography–mass spectrometry (SPME–GC–MS) method is proposed for a rapid analysis of some frequently prescribed selective serotonin re-uptake inhibitors (SSRI)—venlafaxine, fluvoxamine, mirtazapine, fluoxetine, citalopram, and sertraline—in urine samples. The SPME-based method enables simultaneous determination of the target SSRI after simple in-situ derivatization of some of the target compounds. Calibration curves in water and in urine were validated and statistically compared. This revealed the absence of matrix effect and, in consequence, the possibility of quantifying SSRI in urine samples by external water calibration. Intra-day and inter-day precision was satisfactory for all the target compounds (relative standard deviation, RSD, <14%) and the detection limits achieved were <0.4 ng mL^–1 urine. The time required for the SPME step and for GC analysis (30 min each) enables high throughput. The method was applied to real urine samples from different patients being treated with some of these pharmaceuticals. Some SSRI metabolites were also detected and tentatively identified.     

Utility of copper(II) oxide as a packed reactor in flow injection assembly for rapid analysis of some angiotensin converting enzyme inhibitors

A new simple, sensitive, rapid and precise flow injection (FI) procedure based on the formation of copper complexes with some angiotensin converting enzyme (ACE) inhibitors has been developed and evaluated for the analysis of lisinopril (LN), enalapril maleate (EP), ramipril (RP) and perindopril tert-butylamine (PD). In this method, samples were injected into a flowing stream of distilled-deionized water, carried through the packed reactor of CuO for derivatization followed by ultraviolet (UV) detection. The flow rate was 1.5 ml min⁻¹ and column temperature was ambient (25 °C). Lisinopril was injected directly into the flowing stream and the detector response was measured at 262 nm. The hydrolysis products of enalapril maleate, ramipril and perindopril tert-butylamine in 0.2N NaOH were injected after neutralization with 1N HCl and the detector response was measured at 272, 265 and 252 nm, respectively. The developed method was successfully applied to the determination of tested drugs in pharmaceutical preparations at a sampling rate of 60 samples h⁻¹ and a recovery near 100% for all compounds.     

Synthesis of functionally diverse bicyclic sulfonamides as constrained proline analogues and application to the design of potential thrombin inhibitors

Bicyclic sulfonamides were synthesized from 4-alkenyl N-alkenylsulfonyl l-prolines using a ring-closure metathesis reaction. Three types of bicyclic sulfonamides varying in the size of the second ring (5,5; 5,6; 5,7) were synthesized. A sulfonamide counterpart of an indolizidinone 2-carboxylic acid was synthesized and evaluated for its activity against the enzyme thrombin.     

X=Y=ZH Systems as potential 1,3-dipoles. Part 58: Cycloaddition route to chiral conformationally constrained (R)-pro-(S)-pro peptidomimetics

Imines of (1S,9S)-t-butyl-9-amino-octahydro-6,10-dioxo-6H-pyridazino[1,2-a][1,2]diazepine-1-carboxylate undergo thermal (toluene, 110°C) or LiBr-DBU catalysed (MeCN, room temperature) regio- and stereo-specific cycloaddition to a range of chiral dipolarophiles giving enantiopure spiro-cycloadducts in excellent yield. The reactions proceed via intermediate NH azomethine ylides and litho azomethine ylides, respectively and results in the multiplication of chiral centres from 2 (one of which is lost in the process) to 5.     

Reverse zymography using fluorogenic substrates for protease inhibitor detection

A novel, sensitive method for detecting protease inhibitors by using fluorescent protease substrates in gels is described. The protease inhibitors were separated on sodium dodecyl sulfate (SDS)-polyacrylamide gels containing a copolymerized peptide substrate, namely 4-methyl-coumaryl-7-amide (MCA). As the incorporated substrates in the gel, Boc-Phe Ser-Arg-MCA was used for trypsin, Suc-Ala-Ala-Pro-Phe-MCA for alpha-chymotrypsin, and Z-Phe-Arg-MCA for papain. After electrophoresis, washing and incubating the gel with the target protease solutions allowed the substrate to be cleaved by the protease, and the release of the fluorescent 7 amino-4 methyl-coumarin (AMC), which was detected under a UV transilluminator. The uncleaved peptide-MCA substrate remained where the inhibitors were present, and was visualized as dark blue bands on the light-green fluorescent background gel. This new method offers several advantages over other previous methods including: (i) greatly increased sensitivity can be achieved in a shorter period of time, which may be useful for discovering new protease inhibitors in small amounts of crude material; (ii) the procedure is quite simple and quick since the incubation period is very short and no time is needed for staining and destaining steps; (iii) since these probes using substrate specificity/target proteases, they are excellent tools for detection and discrimination of unknown protease inhibitors for various target proteases.     

Lipophilicity in PK design: methyl, ethyl, futile

Lipophilicity, often expressed as distribution coefficients (log D) in octanol/water, is an important physicochemical parameter influencing processes such as oral absorption, brain uptake and various pharmacokinetic (PK) properties. Increasing log D values increases oral absorption, plasma protein binding and volume of distribution. However, more lipophilic compounds also become more vulnerable to P450 metabolism, leading to higher clearance. Molecular size and hydrogen bonding capacity are two other properties often considered as important for membrane permeation and pharmacokinetics. Interrelationships among these physicochemical properties are discussed. Increasing size (molecular weight) often gives higher potency, but inevitably also leads to either higher lipophilicity, and hence poorer dissolution/solubility, or to more hydrogen bonding capacity, which limits oral absorption. Differences in optimal properties between gastrointestinal absorption and uptake into the brain are addressed. Special attention is given to the desired lipophilicity of CNS drugs. In examples using -blockers, Ca channel antagonists and peptidic renin inhibitors we will demonstrate how potency and pharmacokinetic properties need to be balanced.     

2-Oxo-3,4-dihydropyrimido[4,5-d] pyrimidines as new reversible inhibitors of EGFR C797S (Cys797 to Ser797) mutant

Extensive structure-activity relationships (SARs) study of JND3229 was conducted to yield a series of new reversible 2-oxo-3,4-dihydropyrimido[4,5-d]pyrimidine privileged scaffold as EGFR^C797S inhibitors. One of the most potent compound 6i potently suppressed EGFR^{L858R/T790M/C797S} kinase with an IC₅₀ value of 3.1 nmol/L, and inhibited the proliferation of BaF3 cells harboring EGFR^{L858R/T790M/C797S} and EGFR^{19D/T790M/C797S} mutants with IC₅₀ values of 290 nmol/L and 316 nmol/L, respectively. Further, 6i dose-dependently induced suppression of the phosphorylation of EGFR^{L858R/T790M/C797S} and EGFR^{19D/T790M/C797S} in BaF3 cells. Compound 6i may serve as a promising lead compound for further drug discovery overcoming the acquired resistance of non-small cell lung cancer (NSCLC) patients.     

Agaricus bisporus Crude Extract: Characterization and Analytical Application

In the present work crude Agaricus bisporus extract (ABE) has been prepared and characterized by its tyrosinase activity, protein composition and substrate specificity. The presence of mushroom tyrosinase (PPO3) in ABE has been confirmed using two-dimensional electrophoresis, followed by MALDI TOF/TOF MS-based analysis. GH27 alpha-glucosidases, GH47 alpha-mannosidases, GH20 hexosaminidases, and alkaline phosphatases have been also detected in ABE. ABE substrate specificity has been studied using 19 phenolic compounds: polyphenols (catechol, gallic, caffeic, chlorogenic, and ferulic acids, quercetin, rutin, dihydroquercetin, l-dihydroxyphenylalanine, resorcinol, propyl gallate) and monophenols (l-tyrosine, phenol, p-nitrophenol, o-nitrophenol, guaiacol, o-cresol, m-cresol, p-cresol). The comparison of ABE substrate specificity and affinity to the corresponding parameters of purified A. bisporus tyrosinase has revealed no major differences. The conditions for spectrophotometric determination have been chosen and the analytical procedures for determination of 1.4 × 10⁻⁴–1.0 × 10⁻³ M l-tyrosine, 3.1 × 10⁻⁶–1.0 × 10⁻⁴ M phenol, 5.4 × 10⁻⁵–1.0 × 10⁻³ M catechol, 8.5 × 10⁻⁵–1.0 × 10⁻³ M caffeic acid, 1.5 × 10⁻⁴–7.5 × 10⁻⁴ M chlorogenic acid, 6.8 × 10⁻⁵–1.0 × 10⁻³ M l-DOPA have been proposed. The procedures have been applied for the determination of l-tyrosine in food supplements, l-DOPA in synthetic serum, and phenol in waste water from the food manufacturing plant. Thus, we have demonstrated the possibility of using ABE as a substitute for tyrosinase in such analytical applications, as food supplements, medical and environmental analysis.     

Total syntheses of hyacinthacine A2 and 7-deoxycasuarine by cycloaddition to a carbohydrate derived nitrone

Practical syntheses of nitrone 8 by two different approaches from sugars are reported. Its use as a versatile intermediate in highly selective 1,3-dipolar cycloaddition reactions constitutes the key step for novel total syntheses of hyacinthacine A₂ (3) and 7-deoxycasuarine (20) by simple transformations of a common isoxazolidine adduct.