Revisiting the Polymerization of Diphenylacetylenes with Tungsten(VI) Chloride and Tetraphenyltin: An Alternative Mechanism by a Metathesis Catalytic System

An alternative reaction mechanism of the polymerization of diphenylacetylelnes using a catalytic system composed of tungsten(VI) chloride and tetraphenyltin has been proposed through the optimization of reaction conditions and investigation of the effect of the electronic nature of diphenylacetylene monomers on the polymerizability. The detailed structures of the polymers have been suggested by mass spectrometric analysis of the obtained polymers and oligomers, which suggested that a phenyl group of tetraphenyltin has been introduced to an initiating end of the polymer chain. Mass spectrometric analysis also provided information about the termination processes of the polymerization. The experimental results strongly suggested that the polymerization of diphenylacetylenes using tungsten(VI) chloride and tetraphenyltin proceeds through a migratory insertion mechanism rather than the long‐accepted metathesis mechanism.     

Heterometallic Triply‐Bridging Bis‐Borylene Complexes

Triply‐bridging bis‐{hydrido(borylene)} and bis‐borylene species of groups 6, 8 and 9 transition metals are reported. Mild thermolysis of [Fe₂(CO)₉] with an in situ produced intermediate, generated from the low‐temperature reaction of [Cp*WCl₄] (Cp*=η⁵‐C₅Me₅) and [LiBH₄?THF] afforded triply‐bridging bis‐{hydrido(borylene)}, [(μ₃‐BH)₂H₂{Cp*W(CO)₂}₂{Fe(CO)₂}] ( 1 ) and bis‐borylene, [(μ₃‐BH)₂{Cp*W(CO)₂}₂{Fe(CO)₃}] ( 2 ). The chemical bonding analyses of 1 show that the B?H interactions in bis‐{hydrido (borylene)} species is stronger as compared to the M?H ones. Frontier molecular orbital analysis shows a significantly larger energy gap between the HOMO‐LUMO for 2 as compared to 1 . In an attempt to synthesize the ruthenium analogue of 1 , a similar reaction has been performed with [Ru₃(CO)₁₂]. Although we failed to get the bis‐{hydrido(borylene)} species, the reaction afforded triply‐bridging bis‐borylene species [(μ₃‐BH)₂{WCp*(CO)₂}₂{Ru(CO)₃}] ( 2′ ), an analogue of 2 . In search for the isolation of bridging bis‐borylene species of Rh, we have treated [Co₂(CO)₈] with nido‐[(RhCp*)₂(B₃H₇)], which afforded triply‐bridging bis‐borylene species [(μ₃‐BH)₂(RhCp*)₂Co₂(CO)₄(μ‐CO)] ( 3 ). All the compounds have been characterized by means of single‐crystal X‐ray diffraction study; ¹H, ¹¹B, ¹³C NMR spectroscopy; IR spectroscopy and mass spectrometry.     

钨球对高硬度钢斜侵彻效应

为研究高硬度钢板抗不同着角钨球的侵彻性能及破坏模式,通过弹道枪进行了?8 mm、?11 mm钨合金球形破片以0°、20°、40°着角撞击厚度为6 mm、8 mm的高硬度钢板试验,得到了极限贯穿速度v₅₀;分析了钨球轴向径向变形及靶板失效模式与撞击速度的关系,发现高硬度钢板失效模式主要为压缩开坑破坏和沿厚度方向剪切破坏。采用有限元方法对试验进行了模拟,验证了数值模型及参数的合理性,并运用数值模拟方法研究了撞击着角对靶板吸能模式影响,结合试验数据,修正已有极限贯穿速度计算公式。结果表明:随侵彻着角增大,极限贯穿速度提高,且着角越大,极限贯穿速度增长越快;随着角增大,靶板吸能模式逐渐由压缩开坑向剪切冲塞过渡,且着角大于50°时,剪切冲塞耗能将超过压缩开坑耗能;修正后极限贯穿速度计算公式适用范围更广、精度更高,具有较好工程应用价值。     

Li-defect interactions in electron-irradiated n-type silicon by EPR measurements

Single crystal silicon, both with and without oxygen, has been diffused with lithium to concentrations ～10¹⁷/cm², irradiated with 1 to 1.5 MeV electrons, and the ensuing defects studies by EPR measurements. The presence of oxygen strongly affects the properties of these defects. Measurements have indicated the presence of two new defects which involve Li-one in O-containing material and one in O-free material. The defects are observed in their electron-filled state, and indicate a net electron spinof ½. The defect spectra disappear (with time) at room temperature, and can be explained by the formation of other Li-involved defects which lie deeper in the energy bandgap and are not visible by EPR. Electron irradiation at 40 °K followed by annealing at higher temperatures show that both EPR defects described above begin to form at about 200 °K and begin to decrease at about 275 °K-just as does the 250 °K reverse annealing observed generally for n-type Si. Based on these data, and the work of others, it is suggested that both defects form as a result of the motion of Si interstitials which produce a (Li-O-interstitial) complex in O-containing Si, and a (Li-interstitial) complex in O-free Si.     

球形钨合金破片空气阻力系数实验研究

 实验研究了理想球形钨合金破片和经历爆轰驱动的球形钨合金破片长距离飞行时的速度衰减规律。实验结果表明：（1）对于理想球形钨合金破片，在同一初始速度条件下，衰减系数为常数，空气阻力系数与初始速度有关，两者成线性关系；（2）对于经历爆轰驱动的球形钨合金破片，由于有轻微的质量损失和变形，速度衰减规律与理想球形钨合金破片有明显的区别，空气阻力系数与飞行速度有关，两者成线性关系。     

Structural and optical characterization of DC magnetron sputtered molybdenum oxide films

Thin films of molybdenum trioxide were deposited on glass substrates employing direct current (DC) magnetron sputtering by sputtering of molybdenum at different oxygen partial pressures in the range 8 × 10⁻⁵–1 × 10⁻³ mbar and at a substrate temperature of 473 K. The glow discharge characteristics of magnetron cathode target of molybdenum were studied. The influence of oxygen partial pressure on the structural and optical properties of molybdenum trioxide films was investigated. The films formed at an optimum oxygen partial pressure of 2 × 10⁻⁴ mbar were polycrystalline in nature with orthorhombic α- phase and an optical band gap of 3.16 eV. The refractive index of the films formed at an oxygen partial pressure of 2 × 10⁻⁴ mbar decreased from 2.08 to 1.89 with increase of wavelength from 450 to 1,000 nm, respectively. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.