钼(Ⅵ)和钨(Ⅵ)的阴离子交换性能研究——草酸-盐酸体系

本文在草酸-盐酸体系中,研究钼、钨等元素在强碱性阴离子交换树脂ZerolitFF上的阴离子交换行为,并确定其分离的最佳条件。用高仅2厘米,直径0.9厘米的交换柱可分离大量钨等元素中的微量钼;其分离比率高达1×10⁴:1。应用于试剂级钨酸钠中钼的分离,结果满意。此外,还确定在该体系中,钼与树脂相进行交换的主要形式为MoO₂(C₂O₄)₂^2-。     

Poly(vinyl chloride)–poly(ethylene oxide) block copolymers: Synthesis and characterization

Poly(vinyl chloride)-poly(ethylene oxide) block copolymers have been synthesized in solution and emulsion. The polymers were made by first synthesizing macroazonitriles through the reaction of 4,4′-azobis-4-cyanovleryl chloride with hydroxy-terminated poly(ethylene oxide) of varying molecular weights. These macroazonitriles had molecular weights in the range of 3000–88,000 and degrees of polymerization from 5 to 24. Thermal decomposition of the azolinkages in the presence of vinyl chloride monomer yielded block copolymers containing form 2 to 20 wt % poly(ethylene oxide). The structures of the block copolymers were characterized by spectrometric, elemental and molecular weight analyses. The possibility of some graft polymerization occurring via free-radical extraction of a methylene hydrogen from the poly(ethylene oxide) was considered. Polymerization of vinyl chloride with an azonitrile initiator in the presence of a poly(ethylene oxide) yielded predominately homopolymer with some grafted poly(vinyl chloride).     

The Polymerization of Propargyl Chloride Activated by Interaction with Poly(4-vinylpyridine)

The reaction between poly (4-vinylpyridine) and propargyl chloride was studied in methanol. It was shown that, independently of the ratio of reactants to each other, the end products of the reaction are polymers with conjugated bond systems formed by the opening of the propargyl triple bond which was activated by interaction with poly (4-vinylpyridine). It was shown that “normal” quarternization of poly (4-vinylpyridine) by propargyl chloride precedes accelerated polymerization of propargyl chloride which begins at 6 to 8% alkylation. It was established that the solution becomes structured before accelerated polymerization begins. A possible mechanism for this reaction has been proposed.     

Mechanistic studies on ceric-thiourea-initiated polymerization of methyl methacrylate in acid-aqueous media from end group analysis

The mechanism of the redox polymerization of methyl methacrylate in acid-aqueous medium was studied for ceric-thiourea initiator system by analysis of polymer end groups using the dye partition method. Polymerization at room temperature and at pH 2.30 with this initiator system incorporates mostly amino end groups in the polymers to the extent of 1.18-1.31 and a small amount of hydroxyl end group not exceeding 0.08 per polymer molecule. Under the same pH condition, a higher polymerization temperature increases the amine end group content to 2.17-2.30 and hydroxyl end group content to 0.14-0.18 per polymer molecule. A lower polymerization temperature (5°C), or a lower pH (ca. 1) of the reaction medium, produces polymers with exclusively amine end groups, hydroxyl end groups being totally absent. At pHs greater than 3, amine end group incorporation decreases significantly, with simultaneous increase in hydroxyl incorporation. On the basis of end group results the initiating radical has been identified and the mechanism of initiation has been suggested. The possible mode of termination has also been discussed.     

烯丙基氯化镁引发己二酸酐开环聚合

以烯丙基氯化镁引发己二酸酐开环聚合制备功能化的聚己二酸酐。考察了引发剂、温度、溶剂对聚合反应的影响.核磁端基分析表明开环聚合反应可能是通过酰氧键断裂,按“配位－插入”机理进行的。     

Facile synthesis of comb,star, and graft polymers via reversible addition–fragmentation chain transfer (RAFT) polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization has been shown to be a facile means of synthesizing comb, star, and graft polymers of styrene. The precursors required for these reactions were synthesized readily from RAFT‐prepared poly(vinylbenzyl chloride) and poly(styrene‐co‐vinylbenzyl chloride), which gave intrinsically well‐defined star and comb precursors. Substitution of the chlorine atom in the vinylbenzyl chloride moiety with a dithiobenzoate group proceeded readily, with a minor detriment to the molecular weight distribution. The kinetics of the reaction were consistent with a living polymerization mechanism, except that for highly crowded systems, there were deviations from linearity early in the reaction due to steric hindrance and late in the reaction due to chain entanglement and autoacceleration. A crosslinked polymer‐supported RAFT agent was also prepared, and this was used in the preparation of graft polymers with pendant polystyrene chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2956–2966, 2002     

STUDIES ON ORGANO-MOLYBDENUM AND TUNGSTEN COMPOUNDS(Ⅲ)——CATALYTIC POLYMERIZATION OF ACETYLENE BY M-O-C BOND-CONTAINING COMPLEXES OF Mo AND W

Catalytic polymerization of acetylene in the presence of n5-C5H5-M-(CO)3 R (M=Mo,W;R=CH3-,C2H5-) has been studied.The results show that these complexes possess catalytic activities for the polymerization and copolymerization of monosubstituted acetylene.The catalytic mechanism has been preliminarily discussed.It is suggested that the active species be metal-car-bene.In our previous publications we reported the synthesis of some new Fischer's molybdenum and tungsten-carbene complexes and catalytic activity for alkyne polymerization.The results show that the activity of Fischer's molybdenum-carbene is higher than that of tungsten.The catalytic polymerization of alkyne by M-σ-c bond-containing complexes of molybdenum and tungsten has not been reported yet in literature.Therefore,four M-σ-C bondontaining complexes of molybdenum and tungsten were synthesized by using the method reported in the literature,and catalyst polymerization of alkyne by these complexes was examined.     

New processable poly(ether-keto-sulfone)s,poly(arylene sulfone)s,and polyesters curable by intramolecular cyclization. XVII

New processable polyaromatic ether-keto-sulfones were prepared from 2,2′-diiododiphenyl-4,4′-dicarbonyl dichloride (I), bis(p-phenoxybenzene)sulfone (V), isophthaloyl chloride (VI), terephthaloyl chloride (VII), and diphenylether (IX) in Friedel-Crafts-type polymerizations. By varying (VI):(VII) ratio and (V):(IX) ratio and by reducing the polymerization time, soluble, processable polymers were obtained. In these polymers, phenylacetylenyl groups were introduced by replacing the iodine. This process led to soluble and curable polymers. Transparent, tough films and fairly flexible glass fiber laminates can readily be prepared. After curing, the polymers were insoluble and showed excellent chemical and thermal resistance. The curing process increased the polymers' softening temperature by ca. 20°C and produced intersting new useful materials for laminates. Processable poly(arylene sulfone)s were prepared from I, V, and diphenylether-4,4′-disulfonylchloride (X) in a Friedel-Crafts-type polymerization. Different monomer ratios and polymerization times were used. Only low-molecular-weight polymers were obtained. The same result was shown by curable polyester formation from I, VI, VII, and 4,4′-sulfonyldiphenol (XI) in an interfacial polycondensation.     

Kinetics of reduction of transition metal ions by sodium tetrahydroborate. Reduction of molybdenum(VI) and tungsten(VI)

Summary The kinetics of reduction of molybdenum(VI) and tungsten(VI) ions by NaBH₄ in buffered aqueous solution have been investigated. The reaction rate depends upon the first powers of the concentrations of the reactants. The temperature was varied, and the activation parameters were evaluated. Chemical and spectral evidence for the formation of molybdenum(V) and tungsten(V), as the reaction products, is presented. Plausible mechanistic pathways for these reactions are suggested.     

Rigid-Rod benzobisthiazole polymers with reactive fluorene moieties: Synthesis and characterization

High purity 2,7-fluorenedicarboxylic acid chloride was synthesized in a multistep reaction scheme from 2,7-dibromofluorene. Subsequent polycondensation in polyphosphoric acid of 2,5-diamino-1,4-benzenedithiol dihydrochloride with terephthaloyl chloride and 2,7-fluorenedicarboxylic acid chloride led to rigid-rod benzobisthiazole polymers with reactive fluorene moieties. The proportion of fluorene in the resultant polymers was controlled through reaction stoichiometry. Soluble polymers with intrinsic viscosities as high as 33.7 dL/g (methanesulfonic acid, 30°C) were obtained if the polymerization temperature was not allowed to exceed 165°C. Insoluble, presumably crosslinked polymers were obtained at higher temperature (190–200°C). Thermal characterization of the polymers by differential thermal analysis and thermal gravimetric analysis/mass spectroscopy did not disclose any thermal transition to 450°C. Onset of weight loss in air did not occur until over 550°C.     

Cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane

Preparation and cationic ring-opening polymerization of 2-isopropenyl-4-methylene-1,3-dioxolane ( VI ) was performed. Unsaturated cyclic acetal VI was prepared by dehydrochlorination of 2-isopropenyl-4-chloromethyl-1,3-dioxolane, which was easily obtained from methacrolein and epichlorohydrin, with sodium methoxide at ambient temperature. The cationic polymerization of VI with BF₃OEt₂ or CF₃SO₃H at ?78°C afforded only crosslinked polymers, whereas the polymerization by CH₃SO₃H gave soluble poly(keto-ether) which consisted of units VII containing an isopropenyl group in the side chain and units VIII containing a carbon-carbon double bond in the main chain. The reaction of VI with ethanethiol in the presence of protic acid was also carried out as a model reaction of the polymerization. The reaction initiated by the addition of proton to the 4-methylene group of VI , and quantitative ring-opening isomerization followed by the addition of ethanethiol afforded acyclic ketone IX and X . On the basis of the model reaction, the polymerization mechanism is also discussed. © 1993 John Wiley & Sons, Inc.     

Epoxide Polymerization and Copolymerization with Carbon Dioxide Using Diethylaluminum Chloride-25,27-Dimethoxy-26,28-dihydroxy-p-tert-butyl-Calix[4]arene System as a New Homogeneous Catalyst

ABSTRACT

Previously unknown substituted chelate phenolatoaluminum chloride, (25,27-dimethoxy-p-tert-butylcalix[4]arene-26,28-diolato) aluminum chloride, was derived from the reaction of diethyl-aluminum chloride and 25,27-dimethoxy-26,28-dihydroxy-p-tert-butylcalix[4]arene at reactants 1:1 mole ratio. It was applied successfully for the polymerization of propylene oxide and cyclohexene oxide, and their copolymerization with carbon dioxide, leading to respective oligomers and co-oligomers. The catalyst structure and the structure of the obtained low-molecular-weight polymers and copolymers were studied using NMR spectroscopy. Poly(propylene oxide) obtained in the presence of the studied catalyst appeared to contain isotactic diads predominantly, whereas the obtained poly(cyclohexene oxide) did not exhibit any significantly prevailing sequences of either isotactic nor syndiotactic diads. The polymerization mechanism has been proposed and discussed in view of the obtained results.     

Tungsten oxo salicylate complexes from tungsten hexachloride reactions systems

Tungsten hexachloride is a potent halogen-transfer agent, capable of reacting directly with salicylic acid to generate a tungsten oxo fragment and salicoyl chloride. As a result, oxo complexes dominate the chemistry of tungsten(VI) salicylates. Both mono- and disalicylate substituted tungsten oxo complexes are accessible. The Br?nsted free acid W(=O)Cl(Hsal)(sal) complex is a sparingly soluble, presumably polymeric material that can be dissolved in THF. The THF adduct has been characterized by NMR spectroscopy, although an X-ray crystallographic study indicates that the product cocrystallizes with a structurally analogous d(1) WCl(2)(Hsal.THF)(sal) byproduct. The remaining chloride ligand in W(=O)Cl(Hsal)(sal) is replaced by a bridging oxo unit when the reaction contains a significant excess of salicylic acid. The product "linear" oxo bridged ditungsten complex, [W(=O)(Hsal)(sal)](2)O, forms intramolecular hydrogen bonds, accounting for its high solubility in noncoordinating solvents. An X-ray study shows that the intramolecular Hsal.sal hydrogen bonding in this complex accommodates a more linear W-O-W arrangement than does a previously observed class of isostructural diolate derivatives. Tungsten oxo tetrachloride, formed in the initial reaction between salicylic acid and WCl(6), also reacts with the salicoyl chloride byproduct to generate tungsten salicoylate (OAr-2-COCl) complexes.     

Investigation of imprinting parameters and their recognition nature for quinine-molecularly imprinted polymers

A series of molecularly imprinted polymers (MIPs) was prepared using quinine as the template molecules by bulk polymerization. The presence of monomer-template solution complexes in non-covalent MIPs systems has been verified by both fluorescence and UV-vis spectrometric detection. The influence of different synthetic conditions (porogen, functional monomer, cross-linkers, initiation methods, monomer-template ratio, etc.) on recognition properties of the polymers was investigated. Scatchard analysis revealed that two classes of binding sites were formed in the imprinted polymer. The corresponding dissociation constants were estimated to be 45.00 micromol l(-1) and 1.42 mmol l(-1), respectively, by utilizing a multi-site recognition model. The binding characteristics of the imprinted polymers were explored in various solvents using equilibrium binding experiments. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions, etc.) between acidic monomer/polymer and template molecules were mainly responsible for the recognition, whereas in aqueous media, hydrophobic interactions had a remarkable non-specific contribution to the overall binding. The specificity of MIP was evaluated by rebinding the other structurally similar compounds. The results indicated that the imprinted polymers exhibited an excellent stereo-selectivity toward quinine.     

Olefin polymerization in liquid sulfur dioxide initiated by m-chloroperbenzoic acid. I. Homopolymerization of styrene and α-methylstyrene

Homopolymerizations of styrene (Sty) and α-methylstyrene (AMS) in liquid sulfur dioxide were carried out in the temperature range from ?10°C to ?78°C, using m-chloroperbenzoic acid as initiator. It is shown, through the effect of initiator concentration, temperature, and times of reaction on the conversion and molecular weight of the polymers, that AMS is more reactive than Sty because it requires a smaller amount of initiator for the same conversion to be reached, although the molecular weight of the resulting polymer is lower. A linear relationship has been observed for Sty between the degree of polymerization and the initiator concentration. Within the experimental conditions employed, the presence of polysulfones has been discarded by elemental analysis. The polymerization reactions are considered to be cationic in mechanism.     

Structure and reactivity in cationic polymerization of butadiene derivatives. II. 1-phenylbutadiene

The reactivity of 1-phenylbutadiene (1-PBD) in cationic polymerization and the monomer structure were investigated. 1-PBD polymerized at ?78°C in several solvents initiated by cationic catalysts such as stannic chloride and tungsten hexachloride. The polymerizations proceeded predominantly via 3,4-type propagation mode, and gave low molecular weight polymers. More than one double bond of 1-PBD was consumed during the polymerizations, probably due to transfer and cyclization reactions. 1-PBD was several times as reactive as styrene and trans-1,3-pentadiene in copolymerizations. The Hammett plots of reactivities of ring-substituted 1-PBD in cationic polymerization gave the p-value of -1.20, which is 0.6 times that of styrene. The ¹H and ¹³C NMR chemical shifts of ring-substituted 1-PBD were measured and discussed in relation to the reaction mechanism.     

无水FeCl_3存在下丙烯酸甲酯的单电子转移活性自由基聚合动力学

单电子转移活性自由基聚合(SET-LRP)是一种可以对聚合物进行有效分子设计,合成不同拓扑结构并且能够有效调节其相对分子质量和相对分子质量分布的新型聚合方法,具有潜在的应用前景。以2-溴丙酸甲酯作为引发剂,Cu(0)/三(N,N-二甲基氨基乙基)胺(Me6-TREN)为复合催化体系,通过在二甲基亚砜中添加不同摩尔浓度的无水FeCl_3来研究其对丙烯酸甲酯的SET-LRP聚合动力学的影响。结果表明,随着三价铁离子量的增加,其链增长速率常数下降并且出现诱导期延长现象,说明三价铁离子参与了SET-LRP的聚合动力学过程,它和在同样实验条件下二价铜所起的作用截然不同,这可能是由于三价铁离子的氧化导致反应体系中一价铜的浓度降低引起的。此项工作从另外一个角度解释了零价铜催化下SET-LRP聚合诱导期产生的原因。     

Separation and concentration of molybdenum(VI) and tungsten(VI) with chelating ion-exchange resins containing sulphur ligands

Three chelating ion-exchange resins based on macroreticular polyacrylonitrile-divinylbenzene copolymers with thioglycollic acid and cysteine as functional groups have been tested for separation of molybdenum(VI) and tungsten(VI). On a short column of the thioglycollic acid resin, molybdenum(VI) and tungsten(VI) can be selectively sorbed from pH-4.3 acetate buffer and eluted with 2M hydrochloric acid and a mixture of 0.1M sodium hydroxide and 0.1M sodium chloride, respectively, with quantitative recovery even at very low concentrations. Simulated sea-water samples have been analysed.     

Constant rate thermal analysis for thermal stability studies of polymers

This paper explores the relationship between the shapes of temperature-time curves obtained from experimental data recorded by means of constant rate thermal analysis (CRTA) and the kinetic model followed by the thermal degradation reaction. A detailed shape analysis of CRTA curves has been performed as a function of the most common kinetic models. The analysis has been validated with simulated data, and with experimental data recorded from the thermal degradation of polytetrafluoroethylene (PTFE), poly(1,4-butylene terephthalate) (PBT), polyethylene (PE) and poly(vinyl chloride) (PVC). The resulting temperature-time profiles indicate that the studied polymers decompose through phase boundary, random scission, diffusion and nucleation mechanisms respectively. The results here presented demonstrate that the strong dependence of the temperature-time profile on the reaction mechanism would allow the real kinetic model obeyed by a reaction to be discerned from a single CRTA curve.     

New reactivity of the uranyl ion: ring opening polymerisation of epoxides

The uranyl aryloxide, [UO(2)(OAr)(2)(THF)(2)], and uranyl chloride, [UO(2)Cl(2)(THF)(3)] or [UO(2)Cl(2)(THF)(2)](2) act as pre-catalysts for the ring opening polymerization of propylene oxide and cyclohexene oxide. Coordination of the monomers has been investigated using (1)H EXSY spectroscopy and kinetic and thermodynamic parameters reported. NMR analyses of the polymers suggest a bimetallic mechanism for the polymerization.