溅射参数对ZnO薄膜物性的影响

采用磁控溅射方法分别在ITO玻璃和硅片上成功制备了具有良好C轴取向的ZnO薄膜.并研究了溅射气压,基底温度,以及氧偏压对ZnO薄膜物性的影响,从而确定了制备ZnO薄膜的最佳溅射条件.     

一种在固体基底上制备高度取向氧化锌纳米棒的新方法

采用廉价、低温的方法，在修饰过ZnO纳米粒子膜的ITO基底上成功制备出具有 高长径比、高度取向的ZnO纳米棒阵列，用扫描电子显微镜(SEM)，X射线衍射(XRD) ，高分辨透射电子显微镜(HRTEM)以及拉曼光谱对制备出的ZnO纳米棒的结构和形貌 进行了表征，测试结果表明，ZnO纳米棒是单晶，属于六方晶系，与基底直，上仍 沿(001)晶面择优生长的特征，并且ZnO纳米棒基本上无氧空位的存在，统计结果显 示，水热反应2h后90%以上的ZnO纳米棒直径为120～190nm，长度为4μm     

凝胶网格沉淀法制备纳米氧化锌的正交实验研究

通过凝胶网格沉淀法制备了纳米氧化锌,并通过正交实验探讨了明胶用量、锌离子浓度、碳酸根离子浓度以及反应物配比等因素对其粒径的影响。实验确定了制备纳米氧化锌的优化工艺条件:明胶用量22%、锌离子浓度0.7mol/L、碳酸根浓度0.7mol/L、反应物配比1/1。采用XRD、IR、TG-DTA、TEM及激光粒度等测试手段对产物进行了表征。结果表明,在优化工艺条件下制得了粒径为40nm的氧化锌。     

Unified gas and supercritical fluid chromatography on 50 μm i.d. Columns

A unified approach to sequential gas and supercritical fluid Chromatography using 50 μm i.d. open tubular columns is described. Sample introduction is performed by means of a rotary injection valve. In order that linear velocities can be optimized independently, a second rotary valve in the chromatographic oven is used to direct the flow of column eluate to the flame ionization detector through either fused silica tubing in GC, or a frit restrictor in SFC. Applications of sequential GC-SFC on a 50 μm i.d. open tubular column are demonstrated, and comparisons made between sequential GC-SFC on 50 and 100 μm i.d. columns.     

The analysis of lubricating oil additives by supercritical fluid chromatography with packed and open tubular capillary columns

Lubricating oil additives have been analyzed by supercritical fluid chromatography on open tubular and packed capillary columns. Carbon dioxide and modified carbon dioxide were used as mobile phases and detection was accomplished by flame ionization and micro UV. Rapid and efficient analysis of the lubricating oil additives was demonstrated.     

Estimation of the instrumental band broadening contribution to the column elution profiles in open tubular capillary liquid chromatography

In comparison with conventionally packed HPLC columns, from a theoretical point of view, open capillary liquid chromatography (OTLC) systems offer a number of advantages like high plate numbers and short analysis times. On the other hand, drastic changes have to be made to the instrumentation. In particular, the contribution to band broadening by the chromatographic equipment must be considerably reduced. In the present study an OTLC system was developed and evaluated, which yields satisfactory results for 26 μm i. d. columns. The determination of the contribution of the chromatographic equipment to the total band broadening is discussed.     

氧化锌微晶的制备和形貌控制

本文在溶液体系中合成了多种形貌的氧化锌(ZnO)微晶。所得花状、雪花状、棒状、多刺球状和棱柱状氧化锌微晶用粉末X射线衍射(XRD)和扫描电镜(SEM)进行了鉴定和表征,考察了反应条件如溶剂、温度及pH值对ZnO微粒尺寸和形貌的影响,初步探讨了不同形貌ZnO微粒的生长机理。该文对制备形貌可控的氧化物具有一定的指导意义。     

水溶性ZnO量子点制备及其光学性质

利用3-巯丙基三乙氧基硅烷对ZnO进行表面修饰后沉积SiO2, 制备出水溶性SiO2包覆ZnO的量子点. 与直接采用正硅酸乙酯沉积包覆SiO2的ZnO量子点相比, 362 nm处的激子荧光发射峰的强度提高了将近4倍. 由于表面引入了巯基官能团, 量子点的水溶性明显提高, 稳定性增强, 即使在较高的盐浓度下也不会团聚. 通过改变条件, 制备出了发光波长在420 nm的蓝色荧光量子点.     

Templateless assembly of molecularly aligned conductive polymer nanowires: a new approach for oriented nanostructures

Although oriented carbon nanotubes, oriented nanowires of metals, semiconductors and oxides have attracted wide attention, there have been few reports on oriented polymer nanostructures such as nanowires. In this paper we report the assembly of large arrays of oriented nanowires containing molecularly aligned conducting polymers (polyaniline) without using a porous membrane template to support the polymer. The uniform oriented nanowires were prepared through controlled nucleation and growth during a stepwise electrochemical deposition process in which a large number of nuclei were first deposited on the substrate using a large current density. After the initial nucleation, the current density was reduced stepwise in order to grow the oriented nanowires from the nucleation sites created in the first step. The usefulness of these new polymer structures is demonstrated with a chemical sensor device for H(2)O(2), the detection of which is widely investigated for biosensors. Finally, we demonstrated that controlled nucleation and growth is a general approach and has potential for growing oriented nanostructures of other materials.     

氨水溶液制备ZnO纳米晶阵列的研究

以氨水和硝酸锌为前躯体，采用低温水溶液法在涂敷ZnO晶种层的玻璃衬底上外延生长了ZnO纳米棒晶阵列。应用SEM、TEM、SAED和XRD表征了ZnO纳米晶的形貌和结构。讨论了该组成体系水溶液法纳米棒外延生长的机理及其对棒晶形貌的影响。通过对水溶液pH值的原位二次调整，制备出了ZnO纳米管和表面绒毛状的棒晶阵列，基于生长机理探讨了它们的形成原因，为实现不同形貌ZnO纳米晶阵列的优化控制提供了可能的技术途径。结果表明，不同形貌的ZnO均属沿c轴择优取向的六方纤锌矿结构。