Effect of the composition of nickel-containing composites based on stabilised zirconia on catalytic activity in methane steam conversion

A study was carried out on the composition and nature of the stabilizing additive on the activity of nickel-containing composites based on zirconia in the methane steam conversion. The methane conversions were 91–99% on Ni/ZrO₂(Y, Sc, Ce) at 700–800 °C.     

全反式维甲酸合钇(Ⅲ)配合物对DNA的切割和键合作用(英)

以紫外光谱、荧光光谱、粘度法和凝胶电泳方法研究了全反式维甲酸合钇(Ⅲ)配合物与DNA的作用。结果表明，该配合物能在生理条件下比配体和金属离子更有效地切割质粒DNA，体系离子强度和pH值的变化对配合物的切割活性有较大影响，自由基捕捉剂的加入不影响配合物的切割活性。该配合物对DNA的切割可能通过水解机理进行。该配合物可使DNA的粘度增加，使EB-DNA体系的荧光强度和DNA溶液的紫外吸收强度降低。据此推断，该配合物主要以嵌入方式与DNA作用。     

Conductometric study of cationic and anionic complexes in propylene carbonate

Conductivity data are used to determine thermodynamic complex formation constants for cases in which both the initial electrolyte and the complexed electrolyte form ion pairs. Using the method described in the text, the complex formation constants of Li⁺, Na⁺ and K⁺ with the crown ether 18-crown-6 and of Li⁺ with the ligand triphenylphosphine oxide in propylene carbonate have been evaluated from conductance data. The complexation of AgBr in propylene carbonate solutions of n-etrabutylammonium bromide has also been studied by the measurement of molar conductivities. The results of these studies indicate that ion pairing should not be neglected, even in high permittivity solvents such as propylene carbonate, and that the ion pair association constants correlate well with structural studies on cation-crown ether molecular conformations.     

Electrophysical and electrochemical properties of Y1 − x Ca x Cr1 − y Me y O3 (Me = Mg, Cu)

Structure, thermal elongation coefficient, and conductivity of Y_{1 ? x} Ca _x Cr_{1 ? y} Me _y O₃ (Me = Mg, Cu) in air are studied at 100–1000°C. Electrochemical activity of electrodes made of most conducting compositions Y_{1 ? x} Ca _x Cr_{1 ? y} Me _y O₃ (Me = Mg, Cu), contacting solid electrolyte 0.9ZrO₂ + 0.1Y₂O₃, is studied over a wide range of polarizations, in air, at 700–900°C.     

YPxV1—xO4（0≤x≤1）：Dy^3＋的合成及其光谱性质的研究

本文报道了不同组成的ＹＰｘＶ１－ｘＯ４（０≤ｘ≤１）：Ｄｙ＾３＋的合成和结构。ＹＰｘＶ１－ｘＯ４（０≤ｘ≤１）为四方晶系，晶胞参数随ｘ的增大呈线性减小。基质的Ｓｔｏｋｅｓ位移随ｘ的增大逐渐变大，而激发光谱峰值则向短波方向移动。在ＹＰｘＶ１－ｘＯ４：０．００６Ｄｙ＾３＋体系中，ｘ＞０．４时出现的基质发射是由ＰＯ＾３－４引起的。基质及Ｄｙ＾３＋的发光效率和Ｄｙ＾３＋的发光强度的黄蓝比均与ｘ有关。同时探     

镧系与二甘醇-二-(邻羟基苯基)醚配合物的合成与表征

本文合成14种镧系高氯酸盐及硝酸盐分别与二甘醇-二-(邻羟基苯基)醚(记为EO_2(HOP)_2,EO=ethylene oxide,HOP为邻羟基苯基)形成的新配合物,确证组成为Ln(ClO_4)_3·EO_2(HOP)_2·nH_2O(Ln:La-Eu,n=10,Ln:Gd,Dy-Tm,Y,n=7),La_3(NO_3)_9·(EO_2(HOP)_2)_2·3H_2O及La(ClO_4)_2·EO_2H(OP)_25H_2O。文中研究了配合物红外,紫外、~1HNMR谱及~(13)C纵向弛豫时间T_1等,并讨论了共存阴离子、溶剂及配体不同端基对成配的影响。     

The ionization of perchloric and hydrofluoric acids in aqueous solution

Cyclical bifurcated hydrogen bonded structures are proposed for aqueous solutions of hydrofluoric acid and for the bifluoride ion which are consistent with the spectral data. The structure proposed for HF is also applicable to solutions in organic solvents. Raman spectra of tetramethylguanidinium perchlorate suggest that the corresponding Raman spectra of perchloric acid solutions may not be interpreted in terms of a completely dissociated acid. Other evidence including activity coefficient, heat capacity and partial molal volume data suggest that there is some association in relatively dilute perchloric acid solutions between the perchlorate ion and the hydrated proton. This association decreases in concentrated aqueous solutions.     

纳米银自组装电极的制备及对高氯酸二茂铁的电化学响应

采用自组装的方法制备了纳米银粒子修饰金电极,并运用循环伏安法、交流阻抗谱探讨了该电极的电化学特性.研究了高氯酸二茂铁在该修饰电极上的直接电化学行为.实验结果表明,高氯酸二茂铁在该修饰电极上具有良好的电流响应.用示差脉冲法测定高氯酸二茂铁,其氧化峰电流与浓度在4.0×10-6～5.0×10-4 mol/L范围呈良好线性关系,线性方程为:Ip(μA)=0.0236c(μmol/L)-0.0975,线性相关系数为0.9982,检出限为2.3×10-7 mol/L(信噪比为3).     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.