利用相干渡越辐射测量电子束团长度的分析与计算

利用相干渡越辐射(CTR)测量短和超短电子束团长度是国际上束测领域新发展的频域测量技术.文中理论分析和数值计算了北京自由电子激光装置的皮秒级的射频电子束团序列产生的CTR,当辐射波长在长于束长(4ps)时,渡越辐射发生相干增强效应;与非相干渡越辐射相比,当λ≥2πσz时,增强的倍数约等于束团中粒子的数目(10⁸);CTR从亚毫米波到毫米波段呈宽带连续谱特性;渡越辐射能量主要集中在轴线附近,宏脉冲辐射能量高达几毫焦.设计采用偏振型束团长度测量系统,利用CTR自相关技术,实验测量该束团序列的纵向长度,并藉助傅里叶变换光谱法,推求束团电子分布.     

向列液晶表面弹性能K13项的物理效应及检验方法

通过解析推导和数值计算的方法，得到了平衡态指向矢满足的微分方程和边界条件.研究了表面弹性能K13项对磁场作用下的弱锚定向列液晶盒Fréedericksz转变性质的影响.结果表明，表面弹性能K13项的存在对液晶系统的自由能有很大的影响，从而改变转变的性质，诱导液晶盒在阈值点发生一级Fréedericksz转变.给出了发生一级转变的物理条件，它除了与液晶的结构和材料有关外，还依赖于液晶表面弹性能K13项，同时给出了由此判断K13项是否存在的检验方法. 关键词： 表面弹性能K13项 弱锚定 Fréedericksz转变     

Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.     

Thermal degradation of two liquid fuels and detonation tests for pulse detonation engine studies

The use of liquid fuels such as kerosene is of interest for the pulse detonation engine (PDE). Within this context, the aim of this work, which is a preliminary study, was to show the feasibility to initiate a detonation in air with liquid-fuel pyrolysis products, using energies and dimensions of test facility similars to those of PDEs. Therefore, two liquids fuels have been compared, JP10, which is a synthesis fuel generally used in the field of missile applications, and decane, which is one of the major components of standard kerosenes (F-34, Jet A1, ...). The thermal degradation of these fuels was studied with two pyrolysis processes, a batch reactor and a flow reactor. The temperatures varied from 600°C to 1,000°C and residence times for the batch reactor and the flow reactor were, respectively, between 10–30 s and 0.1–2 s. Subsequently, the detonability of synthetic gaseous mixtures, which was a schematisation of the decomposition state after the pyrolysis process, has been studied. The detonability study, regarding nitrogen dilution and equivalence ratio, was investigated in a 50 mm-diameter, 2.5 m-long detonation tube. These dimensions are compatible with applications in the aircraft industry and, more particularly, in PDEs. Therefore, JP10 and decane were compared to choose the best candidate for liquid-fuel PDE studies. This paper was based on work that was presented at the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Canada, July 31 – August 5, 2005.     

Nonparametric estimation and adaptive control in a class of finite Markov decision chains

We consider a class of Markov decision processes withfinite state and action spaces which, essentially, is determined by the following condition: The state space isirreducible under the action of any stationary policy. However, except by this restriction, the transition law iscompletely unknown to the controller. In this context, we find a set of policies under which thefrequency estimators of the transition law are strongly consistent and then, this result is applied to constructadaptive asymptotically discount-optimal policies.Dedicated to Professor Truman O. Lewis, on the occasion of his sixtieth birthdayThis research was supported in part by the Third World Academy of Sciences (TWAS) under Grant TWAS RG MP 898-152, and in part by the Consejo Nacional de Ciencia y Tecnología (CONACYT) under Grant A128CCOEO550 (MT-2).     

关于三维各向同性谐振子径向矩阵元计算的讨论

根据广义Laguerre多项式的数学性质，导出了较为简单的三维各向同性谐振子径向矩阵元的普遍公式,并在这基础上计算了一些重要特殊情形的径向矩阵元: 矢径r整数次幂的平均值，电偶极跃迁矩阵元和电四极跃迁矩阵元. 关键词： 三维各向同性谐振子 径向矩阵元 广义Laguerre多项式 偶极跃迁 四极跃迁     

用玻色子组态混合和玻色子表面δ相互作用研究核谱

用玻色子组态混合波函数和玻色子表面δ相互作用研究了三玻色子核⁴⁶Ti和⁵⁴Cr的sdgIBMI的能谱和E2跃迁概率,理论计算结果令人满意,比sdIBMI能拟合出更多的能级和E2跃迁概率,而且它们的误差更小. 说明g玻色子在振动区也起着重要的作用,同时进一步证明了这种玻色子组态混合模型是成功的.     

Organometallic chemistry related to applications for microelectronics in Japan

This is meant to be a brief overview of the developments of research activities in Japan on organometallic compounds related to their use in electronic and optoelectronic devices. The importance of organometallic compounds in the deposition of metal and semiconductor films for the fabrication of many electronic and opto-electronic devices cannot be exaggerated. Their scope has now extended to thin-film electronic ceramics and high-temperature oxide superconductors. A variety of organometallic compounds have been used as source materials in many types of processing procedures, such as metal–organic chemical vapor deposition (MOCVD), metalorganic vapor-phase epitaxy (MOVPE), metal–organic molecular-beam epitaxy (MOMBE), etc. Deposited materials include silicon, Group III–V and II–VI compound semiconductors, metals, superconducting oxides and other inorganic materials. Organometallic compounds are utilized as such in many electronic and optoelectronic devices; examples are conducting and semiconducting materials, photovoltaic, photochromic, electrochromic and nonlinear optical materials. This review consists of two parts: (I) research related to the fabrication of semiconductor, metal and inorganic materials; and (II) research related to the direct use of organometallic materials and basic fundamental research.     

室温下压致铁钴镍合金的bcc→hcp相变

 本文采用高压X光衍射方法在金刚石对顶压砧中在位地（in situ）研究了Fe₆₈Co₂₄Ni₈（wt%）合金在室温下的压致bcc→hcp结构相变和直到40.5 GPa的等温压缩行为。实验结果表明该合金在常压下为bcc结构，晶格常数a₀=(0.287 0±0.000 1) nm，体积V₀=(7.119±0.007) cm³/mol，密度ρ₀=(7.981±0.008) g/cm³；在20.9 GPa附近出现bcc→hcp结构相变，两相共存压力区约10 GPa，在此区域内有晶面间距d(002)_hcp=d(110)_bcc，且原子平面(002)_hcp//(110)_bcc，hcp相比bcc相体积减小(0.33±0.02) cm³/mol；高压相hcp结构的晶格参数比值c/a=1.608±0.004；相变后原子配位数的增加使得hcp相(002)平面内及(002)平面间的最近邻原子间距比bcc相最近邻原子间距分别增大约1.6%和0.5%；用Murnaghan状态方程对实验数据进行最小二乘法拟合，得到bcc相B₀=(130±13) GPa，B₀'=12.6±0.5；hcp相V₀=(6.62±0.04) cm³/mol，B₀=(243±21) GPa，B₀'=6.8±0.3；对于该合金的bcc→fcp相变时的结构转变机制做了详细的讨论。     

Structural phase transition in substituted La2CuO4 and Pr2CuO4−y

The structural phase transition from orthorhombic (T) phase to tetragonal (T′) phase in substituted La_2−x R _x CuO₄ (R = Pr, Nd, Sm, Eu and Gd) and T′ to T-phase in Pr_2−x M _x CuO_4−y (M = Sr, Ca) has been studied by X-ray diffraction technique. The T-phase of La₂CuO₄ is transferred to T′ phase abruptly atx=0.8, 0.4, 0.4, 0.3 and 0.4 respectively for substitution of Pr, Nd, Sm, Eu and Gd for La in La₂CuO₄ without evidence of the T* phase. The T′ structure of Pr₂CuO₄ (x = 0.0) gets transformed to the T* structure at 30% Ca doping (x=0.6) and then to the T structure at 50% Ca doping (x=1.0), while for Sr-contentx=0.0, 0.4 and 1.0 it shows T′, T* and T structure respectively.