双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断     

保险管理决策中的两个问题

本文运用风险决策理论建立了分保限额与红利分派两个保险管理决策问题的数学模型,从理论和实践两个方面讨论了最优管理策略,并给出了计算实例。     

高强混凝土弯压极限应变试验研究与计算

由于混凝土材料理化特性的差异,高强混凝土的弯压极限应变明显地小于普通混凝土,依据试验结果分析了高强混凝土的弯压极限应变变化规律,并给出了它的计算公式.     

Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

总延误问题顺时安排法的性能比

给定一组工件的加工时间与工期，要求确定这些工件在一台机器上的加．工排列，使相应的总延误达到最小，这就是总延误问题．该问题在近年已被证明是NP困难的．由Wilkermn和Irwin（1971），林勋（1983）等所研究的顺时安排法能得到相邻交换意义下的局部解．在本文中，我们进一步证明该算法能得到前移邻域意义下的局部解，并确定了该算法的性能比．     

Bifurcation and Isochronicity at Infinity in a Class of Cubic Polynomial Vector Fields

In this paper, we study the appearance of limit cycles from the equator and isochronicity of infinity in polynomial vector fields with no singular points at infinity. We give a recursive formula to compute the singular point quantities of a class of cubic polynomial systems, which is used to calculate the first seven singular point quantities. Further, we prove that such a cubic vector field can have maximal seven limit cycles in the neighborhood of infinity. We actually and construct a system that has seven limit cycles. The positions of these limit cycles can be given exactly without constructing the Poincare cycle fields. The technique employed in this work is essentially different from the previously widely used ones. Finally, the isochronous center conditions at infinity are given.     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.     

Photoelastic stress freezing analysis of total shoulder replacement systems

Photoelastic stress freezing analyses in the orthopaedic literature have, in the past, been limited to studies where bone-on-bone, bone-on-metal or ultra-high molecular weight polyethylene (UHMWPE)-on-metal constructs are modeled. In these cases photoelastic plastics are used to simulate either bone or UHMWPE as it interacts with a metal implant. In joints such as the shoulder, a UHMWPE component is often cemented directly into the scapula's glenoid concavity using polymethylmethacrylate (PMMA). While a photoelastic material can be used to simulate bone with proper load scaling, UHMWPE and PMMA have very different mechanical properties at elevated stress freezing temperatures as compared within vivo body temperature. In this study, materials were identified such that proper scaling of elastic properties at elevated temperatures was utilized to simulate the metal-UHMWPE-PMMA-bone construct. Stresses on orthogonal planes throughout the glenoid were compared for two different UHMWPE component anchoring geometries (keeled and pegged). High stresses were found at the neck of the glenoid and also at the component-bone interface beneath simulated PMMA inclusions.     

The semiclassical limit of a quantum Fermi accelerator

A classical Fermi accelerator model (FAM) is known to show chaotic behavior. The FAM is defined by a free particle bouncing elastically from two rigid walls, one fixed and the other oscillating periodically in time. The central aim of this paper is to connect the quantum and the classical solutions to the FAM in the semiclassical limit. This goal is accomplished using a finite inverted parametric oscillator (FIPO), confined to a box withfixed walls, as an alternative representation of the FAM. In the FIPO representation, an explicit correspondence between classical and quantum limits is accomplished using a Husimi representation of the quasienergy eigenfunctions.