戊二酸钛（Ⅲ）与氮化钛的制备

戊二酸钛（Ⅲ）与氮化钛的制备陈吉书，吕真国，徐其亨（曲靖师专化学系曲靖）（曲靖地区环境监测站曲靖）（云南大学化学系昆明６５００９１）关键词戊二酸钛，氮化钛，热分解氮化钛具有硬度大、熔点高、耐磨、耐腐蚀、导电性好、美观（金黄色）等优点，具有重要的工业用...     

TiCl4-Cr还原偶联活泼卤化物及芳醛、芳酮的研究

低价钛化合物在有机合成和有机反应中有着广泛的应用。我们曾研究了低价钛对α,α,α-三卤甲基苯的脱卤偶联、对2,2-二芳     

Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.     

二氧化碳同环氧丙烷交替共聚用催化剂的研究

探讨了有机金属催化剂的组成及其对二氧化碳同环氧丙烷交替共聚产物结构的影响,发现二乙基锌—助剂体系的催化活性按如次顺序递降:二乙基锌—连苯三酚>二乙基锌—间苯二酚>二乙基锌—对苯二胺>二乙基锌—亚乙基脲。若用三异丁基铝代替二乙基锌同连苯三酚构成催化剂,则失去对二氧化碳同环氧丙烷交替共聚反应的活性同时,著者发现二乙基锌—二元芳胺催化体系与二乙基锌—二元酚催化体系的催化活性规律完全不同。     

Nitriding of titanium with plasma jet under reduced pressure

The nitriding of titanium with argon-nitrogen (3%) and argon-nitrogen (3%)-hydrogen (2%) plasma jets at pressures of 190 torr was studied. The reaction kinetics obeyed mainly a parabolic law. The parabolic kinetic constants were 10^–10–10^–8 g² cm^–4 s^–1, which were 2–3 orders of magnitude larger than those in R.F. discharges. From emission spectroscopy, nitrogen atoms in the excited states were observed. The nitrogen atoms can promote the nitriding reaction. The effect of the addition of hydrogen to nitrogen is also briefly discussed.     

A New Biochemical Way for Conversion of CO2 to Methanol via Dehydrogenases Encapsulated in SiO2 Matrix

CO2 is converted to nethanol through an enzymatic approach using formate dehydrogenase(FateDH),formaldehyde dehydrogenase(FaldDH）and alcohol dehydrogenase(ADH)coencapsulated in silica gel prepared by modified sol-gel process as catalysts,TEOS as precursor,NADH as an electron donor.The highest yield of methanol was up to 92.1% under 37℃,pH7.0 and 0.3Mpa.     

Preparation and properties of SiO2-TiO2 thin films from silicic acid and titanium tetrachloride

The preparation of SiO₂-TiO₂ thin films by the sol-gel method using silicic acid and titanium tetrachloride as starting materials was studied. The homogeneous sols were obtained by the condensation reaction of silicic acid with titanium tetrachloride in methanol-tetrahydrofuran. The dipcoating of slide glasses and silicon wafers followed by heat treatment gave oxide thin films of 88–93% transmittance, 3000–4500 Å thickness, and 1.45–1.80 refractive index, depending on heat-treatment temperature and TiO₂ content. FT-IR measurement showed that the Si-O-Ti bond is formed even in the sol and films. The variations of film thickness and refractive index on transformation from the gels into the oxides were found to be quite low.     

Chemically assisted ion beam etching of silicon and silicon dioxide using SF6

A chemical flux of sulfur hexafluoride (SF₆) in conjunction with low-energy Ar-ion bombardment has been used for chemically assisted ion beam etching (CAIBE) of silicon and silicon dioxide. The study has shown a large degree of independent control over the selectivity and anisotropy in dry etching. The total etch rate could be controlled by varying either the Ar-ion milling parameters or the chemical flux of SF₆. Etch rate enhancement of 7–8 for silicon and 3–4 for silicon dioxide have been obtained over pure physical etching.     

Fluorine-doped nanocrystalline SnO2 powders prepared via a single molecular precursor method as anode materials for Li-ion batteries

Fluorine-doped nanocrystalline tin dioxide materials (F:SnO₂) have been successfully prepared by the sol-gel process from a single molecular precursor followed by a thermal treatment at 450-650 °C. The resulting materials were characterized by FTIR spectroscopy, powder X-ray diffraction, nitrogen adsorption porosimetry (BET) and transmission electron microscopy (TEM). The mean particle size increased from 5 to 20 nm and the specific surface area decreased from 123 to 37 m²/g as the temperature of heat treatment was risen from 450 to 650 °C. Fluorine-doped nanocrystalline SnO₂ exhibited capacity of 560, 502, and 702 mA h/g with 48%, 50%, and 40% capacity retention after 25 cycles between 1.2 V and 50 mV at the rate of 25 mA/g, respectively. In comparison, commercial SnO₂ showed an initial capacity of 388 mA h/g, with only 23% capacity retention after 25 cycles.