Asymmetric polymerization using C1 resources

Two examples of asymmetric alternating copolymerization, (1) the alternating copolymerization of α‐olefins (monosubstituted ethenes) with carbon monoxide and (2) the alternating copolymerization of meso‐epoxide with carbon dioxide, are described, and the meaning of chirality in polymer synthesis is emphasized. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 215–221, 2004     

二氧化碳和氧气的快速电化学方法联合测定

根据Ｏ２和ＣＯ２在二甲亚砜（ＤＭＳＯ）介质中Ｐｔ电极上的伏安特性，采用微电极并结构计算机控制的电位调制技术，建立了快速联合测定ＣＯ２和Ｏ２的调制电位脉冲库仑法和调制电位脉冲电流法，取得了满意的结果。一次测量时间快达４０ｍｓ。ＣＯ２检测范围０￣１０％（体积百分比）；Ｏ２检测范围不受限制。通过编程设计特定的调制电位－时间波形，可保持连续检测的长期稳定性。     

负载型TiO2-聚酰亚胺亲水复合膜的制备与分离性能

采用溶解－流涎法，湿相转换法和干湿相转换法制轩了负载型ＴｉＯ２－聚酰亚胺亲水复合膜，采用扫描电镜，红外光谱，压汞和透气性实验等手段对该膜的孔径分布，表面结构及扩散性能进行了表征，并讨论了制备亲水对膜孔结构的影响，实验结果表明，三种膜均具有很好的亲水性能，而干湿相转换膜具有良好的孔径分布和分离性能。     

Ti2(OMe)4/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换法制备了SiO2负载的Ti2(OMe)4双核桥联配合物催化剂，用IR、TPD和微反技术考察了催化剂的表面构造及CO2和CH3OH在催化剂表面上的化学吸附和反应性能。结果表明：双核桥联配合物Ti2(OMe)4以Ti-O-Si键锚定在SiO2表面上；CO2在催化剂表面存在桥式和甲氧碳酸酯基两种吸附态，其中甲氧碳酸酯基吸附态是生成DMC的关键物种；CH3OH在催化剂上只有一种分子吸附态。在150℃以下，CO2和CH3OH在Ti2(OMe)4/SiO2催化剂表面上高选择地生成碳酸二甲酯。     

Enhanced photocatalytic activity of zeolite-encapsulated TiO2 clusters by complexation with organic additives and N-doping.

In the literature it was found that titanium oxide clusters of a few metal atoms encapsulated inside the micropores of zeolite Y exhibit large blue shifts in the Ti-O ligand-to-metal charge-transfer band as compared to non-encapsulated bulk titanium dioxide particles. This blue shift of the Ti-O absorption band is believed to have a negative effect on the photocatalytic activity of zeolite-encapsulated TiO2. We report here on circumventing this problem and increasing visible-light absorption by means of a red shift of the absorption band caused by addition of some organic molecular modifiers containing acidic OH groups that can strongly bind with titanol groups TiOH. In the studied series of zeolite-encapsulated TiO2 samples, the red shift of the optical spectrum follows the order: catechol > 4-aminobenzoic acid > benzoic acid. Also N-doping of zeolite-encapsulated TiO2 clusters by thermal treatment with urea leads to a red shift of the TiO2 absorption band that depends on the annealing and hydration conditions. By comparison to the degradation of phenol in aqueous solution, we have demonstrated that these changes in the absorption spectrum on addition of the organic modifier are also reflected in the photocatalytic activity of the samples; a greater increase in photocatalytic activity (about 30%) was observed for the additive catechol.     

Kinetic and computational studies on aminolysis of bicyclic carbonates bearing alicyclic structure giving alicyclic hydroxyurethanes

Aminolysis of bicyclic carbonates, which consist of five-membered cyclic carbonate and five- or six-membered alicyclic groups, was examined. Kinetic studies revealed that the aminolysis of the bicyclic carbonate with cyclohexane ring proceeded more smoothly than that of the bicyclic carbonate with cyclopentane ring. Computational calculation suggested that the different reaction rates originate from the distinct ring-strain of the cyclic carbonate groups affected by the conformation of the alicyclic groups.     

Synthesis of oligosaccharides catalyzed by thermostable β-glucosidase fromPyrococcus furiosus

Focusing on CO₂ fixation, photoautotrophic cultivation of the red algaPorphyridium cruentum was investigated by means of a batch culture under a 5% CO₂-enriched atmosphere. The algal growth kinetics was successfully described with a logistic model, and simulation of a continuous culture under the optimum growth conditions (30°C, 12 klux and 1.18 g-cells/L) showed that the algal CO₂-fixation activity could reach 0.66 g-CO₂/(L X d). Under the same growth conditions, eicosapentaenoic acid (20:5 n-3, EPA) and arachidonic acid (20:4 n-6, ARA) yields were similarly calculated to be 3.6 mg-EPA/(L X d) and 6.5 mg-ARA/(L X d), respectively.     

Ti接枝MCM-41催化剂的结构设计及化学亲和选择性研究

 用二氯化钛茂作为活性物种的来源，利用Si－MCM－41催化剂表面羟基的反应性，得到了Ti接枝MCM－41催化剂的两种结构模型．结构表征结果表明，Ti接枝MCM－41催化剂不仅长程结构好，孔径分布均一，而且催化剂表面活性中心含量高．两种结构模型催化剂上芳烃羟化反应性能表明，Ti接枝MCM－41催化剂表面的亲水／憎水性可以在较宽的范围内调变，从而可实现控制芳烃羟化的化学亲和选择性．另外，研究结果还表明，Ti接枝MCM－41催化剂具有很好的活性稳定性．     

金属离子掺杂对TiO2光催化性能的影响

TiO₂光催化反应过程涉及光生电荷、电荷迁移、电荷在TiO₂表面的反应和溶液体相反应4个顺序相接并相互影响的步骤.在TiO₂中掺杂金属离子对以上4个步骤均有重要影响,合理的掺杂可有效地提高其光催化性能.本文综合了国内外此方面的最新研究成果,从提高TiO₂光催化性能和优化光催化反应的角度出发,在材料吸光能力、电荷扩散、表面反应、粒径和晶型等方面,全面地分析总结了金属离子掺杂的影响效果和规律性认识,并对TiO₂基光催化材料的金属离子掺杂改性研究的未来发展方向提出了建议.文中还简要介绍了相关的掺杂方法和材料表征手段.     

One-phase supported titanium-based catalysts for polymerization of ethylene. III. ESR spectra of the ternary system Sio2—R3Al—TiCl4

The ternary catalyst systems based on activated silica, aluminum alkyl, and titanium tetrachloride were polymerized in an ethylene gas-phase polymerization process, and further studied using ESR spectroscopy. Two types of titanium (III) ESR-active centers were observed and a linear dependence between the concentration of that characterized by a rhombic anisotropic signal with g₁ = 1.962, g₂ = 1.945, and g₃ = 1.913 values and catalyst productivity was found. © 1993 John Wiley & Sons, Inc.