一种可溶性聚萘酰亚胺的合成与性能

本文合成了既带有一个苯环侧基又带2个醚键的萘二酐单体, 并采用该二酐单体与4,4′-ODA进行聚合得到了具有良好溶解性和耐热性的聚萘酰亚胺, 该PNI表现出了非常好的耐水解性能, 其耐水解性远远超过五元环聚酰亚胺.     

普鲁士蓝和苝四甲酸二酐衍生物膜修饰的过氧化氢生物传感器

以玻碳电极(GCE)为基底,采用恒电位法沉积一层普鲁士蓝(PB),然后将苝四甲酸二酐衍生物(PTC-NH2)自组装到其表面,形成既带氨基功能团,又可有效防止PB渗漏的导电膜.通过静电吸附和共价键合作用固定纳米金和辣根过氧化物酶(HRP)的复合物,从而制得性能优良的过氧化氢(H2O2)生物传感器.采用循环伏安法(CV)和计时电流法,考察了传感器的电化学性能.实验表明,本传感器具有灵敏度高、线性范围宽、检出限低、稳定性好、抗干扰能力强等特点.其线性范围为2.0×10-6～1.4×10-3mol/L;检出限为8.3×10-7mol/L(S/N=3).     

Highly Soluble Phenylethynyl-terminated Imide Oligomers and Thermosetting Polyimides Based on 2,2′3,3′-Biphenyltetracarboxylic Dianhydride

The properties of a series of imide oligomers were characterized according to their molecular weights, solubility, and thermal and rheological properties. This series of imide oligomers was synthesized via a two-step method using 2,2′,3,3′-biphenyltetracarboxylic dianhydride(3,3′-BPDA) and aromatic diamines as the monomers, and 4-phenylethynyl phtlialic anhydride(PEPA) as the end-capping agent. The imide oligomers based on 3,3′-BPDA showed excellent solubility in low boiling point solvents and low melt viscosity, which were attributed to their unique bent architectures. High-performance thermosetting polyimides were produced from these oligomers via thermal crosslinking of the phenylethynyl groups. The mechanical and thermal properties of the thermosets were studied using tensile testing, dynamic mechanical thermal analysis(DMTA), and thermogravimetric analysis(TGA). The 3,3′EPDA-based thermosets exhibited excellent thermal properties, with glass transition temperatures of up to 455℃, and 5% mass loss temperatures of up to 569℃ in air. The thermosets based on 3,3-BPDA showed superior thermal properties compared to those derived from TriA-X series oligomers.     

EDTA冠醚衍生物——Ⅷ.两个长桥链双冠醚的合成

前文报道的由EDTA桥联的水溶性双冠醚,虽然对碱土金属离子的配位有其特点,但可能是由于桥键不够长和二个刚性苯环的存在,桥键上两个羧甲基不但不起配位协同作用,反而阻碍了两个冠醚环的靠近,从而未显示出预期的高络合特性。为此,我们按下式合成了两个更长桥键的双冠醚1和2:     

SYNTHESIS AND CHARACTERIZATION OF ORGANSOLUBLE POLYIMIDE AND COPOLYIMIDES FROM ALICYCLIC DIANHYDRIDE

A kind of highly organsoluble polyimide and copolyimides were successfully synthesized from bicyclo（2.2.2）-oct- 7-ene-2,3,5,6-tetracarboxylic dianhydride （BCDA）, the commercial diamine 4,4＇-methylenedianiline （MDA） and the designed diamine 4,4＇-methylenebis-（2-tert-butylaniline） （MBTBA）. The polyimide from BCDA and MBTBA is highly soluble in conventional low boiling point solvents （such as chloroform, tetrahydrofuran） at room temperature. But the solubility of the copolyimides in conventional solvents decreased with the molar ratio of MBTBA and MDA decreased. When the molar ratio of MBTBA and MDA was larger than 7/3, the copolyimides can be soluble in low boiling point solvents at room temperature to form a transparent, flexible, tough film by solution casting. When the molar ratio of MBTBA and MDA was between 7/3 and 1/9, they can only be soluble in hot dipolar aprotic solvents （such as DMF, NMP etc.） and form films too. The copolyimide was only soluble in m-cresol when the molar ratio of MBTBA and MDA was lower than 1/9. The number-average molecular weights of the soluble copolyimides were larger than 5.8 × 1064 g/mol by GPC and their polydispersity indices were higher than 1.4. Only one glass transition temperature of these copolyimides was detected around 400℃ by DMA. The copolyimides did not show appreciable decomposition up to 430℃ in N2.     

A mechanism for the electron beam lithography of solvent-soluble photosensitive polyimides

Solvent-soluble and intrinsically photosensitive polyimides were prepared, and their electron beam reaction was investigated. Negative tone patterns were formed by the electron beam irradiation of PI(BTDA/DEDPM) and PI(BEDA/DEDPM). The mechanism for the pattern formation of PI(BTDA/DEDPM) was determined from transient absorption measurements, changes in the molecular weights, and IR spectrum measurements to be crosslinking via hydrogen abstraction by the triplet excited state benzophenone moiety. For the case of PI(BEDA/DEDPM), the pattern was formed by insolubilization due to chemical change in the polymer. These reactions are found to be so inhomogeneous that insolubilization of the polymer occurs at an early stage of gelation.     

四羧酸环戊烷型聚酰亚胺膜对CO_2和CH_4的透过性

四羧酸环戊烷型聚酰亚胺膜对ＣＯ２和ＣＨ４的透过性张俊彦潘光明（中国科学院兰州化学物理研究所兰州７３００００）关键词环戊烷四羧酸，聚酰亚胺，气体分离，膜理想的气体分离膜材料应具有高的透气性和良好的透气选择性，耐高低温，耐化学介质和良好的机械强度及膜加...     

Naphthalene dianhydride based selective detection targetable fluorescent probe for monitoring exogenous Iron in living cells

A green emissive PET operating fluorescent turn-on cell permeable novel probe R1 has been successfully developed and utilized for the detection of Fe⁺³ in the pure aqueous system at sub-nanomolar level. Moreover, probe R1 demonstrate highly sensitive and selective towards Fe⁺³ over the other divalent and trivalent metal ions and was established by using fluorescence spectroscopy. The efficiency and aid of R1 was demonstrated by the fluorescence imaging of captured Fe⁺³ within Pollen grains by using fluorescence microscopy. These results indicate that, this is the first fluorescent turn-on PET probe to detect sub-nanomolar Fe⁺³ in the pure aqueous system and in cellular level.     

Structure-property study of polyimides derived from PMDA and BPDA dianhydrides with structurally different diamines

A series of aromatic diamines were polymerized with two aromatic dianhydrides, pyromellitic dianhydride and 3,3^′,4,4^′-biphenyltetracarboxylic dianhydride, and the resulting poly(amic acid)s were thermally cyclodehydrated to aromatic polyimides. The polyimides were characterized by determining the glass transition temperatures (T_g), thermal stability, coefficients of thermal expansion, and wide-angle X-ray diffraction. Structure-property relationships are elucidated and discussed in terms of the structural fragments in the polymer chain. The PMDA-based polyimides generally revealed a higher T_g than the corresponding BPDA-based analogues. Generally, the dilution of the imide content by the insertion of oxyphenylene segments into the diamines significantly reduced the T_g. The introduction of m- or o-phenylene units into the polymer backbone usually resulted in a decrease in T_g. The attachment of pendant groups on the backbone may lead to decreased or increased T_gs, depending on the structure of pendant groups. As evidenced by X-ray diffraction, the polyimides derived from rigid, rod-like diamines or the diamines having two or three p-oxyphenylene showed a higher crystalline tendency. The presence of aliphatic pendant groups slightly reduced the thermal stability of the polyimides. The other structural changes did not show a dramatic influence on the thermal stability. Some polyimides obtained from p- or m-phenylenediamine had low thermal expansion coefficients below 2×10−5°C⁻¹.     

Soluble copolyimides with high modulus and low moisture absorption

A series of transparent copolyimides were prepared from PMDA-ODPA-TFDB via chemical imidization of the corresponding poly(amic acid)s. Copolyimides containing less than 70% PMDA were completely soluble in DMAc and other amide solvents and gave ductile films with unexpectedly high tensile moduli (up to 8.9 GPa). Water absorption, after boiling in water for 72 h, were less than 1 % for the copolymer with 67% PMDA and less than 0.5% for copolymers with less PMDA. Thermooxidative stability was comparable to a commercial polyimide film up to 325°C. A copolyimide containing 34% PMDA had the best overall properties based on the above tests. Additional evaluations revealed a coefficient of linear expansion of about 6 X 10^?6/°C, an essentially frequency independent dielectric constant of 2.8, a dissipation factor of about 0.004–0.01 over the range of 1–1000 kHz, and complete retention of tensile properties after exposure to a humid environment for 16 weeks. A model compound study suggests the probable presence of short blocks in these copolymers. © 1993 John Wiley & Sons, Inc.