超高交联树脂对苯胺的吸附机理研究

在静态条件下，研究了水溶液中超高交联树脂AM－1和NJ－8及大孔吸附树脂Amberlite XAD－4吸附苯胺的热力学特性，测定了不同温度下的吸附等温线。结果表明，在稀溶液中3种树脂吸附苯胺都符合Langmuir和Freundlich模型，其中AM－1和NJ－8对苯胺的吸附是一个吸热过程；由于AM－1和NJ－8的微孔结构和表面存在酸性基团的吸附中心，对苯胺的吸附是物理吸附和化学吸附共同作用的结果。     

VINYL MONOMERS BEARING CHROMOPHORE MOIETIES AND THEIR POLYMERS——Ⅹ.INITIATION AND PHOTOCHEMICAL PROPERTIES OF p-(N,N-DIMETHYLAMINO)STYRENE AND ITS POLYMERS*

A vinyl monomer having an electron-donating moiety, p-(N,N-dimethylamino)styrenc (DMAS),was synthesized. It was combined with benzoyl peroxide (BPO) to form a redox initiation system to initiatethe polymerization of methyl methacrylate (MMA). UV spectra measurements show that DMAS enters thePMMA chain as well. Both DMAS and its polymer P(DMAS) display strong fluorescence, and thefluorescence can be quenched by electron-deficient compounds such as methacrylonitrile, fumaronitrile andmethyl methacrylate etc. Moreover, DMAS can also form charge transfer complex (CTC) with strongelectron acceptors such as tetracyanoethylene (TCNE). The difference between the photochemical propertiesof DMAS and P(DMAS) were explained in terms of molecular structure change and polymer conformationeffect in solution. In addition, the CTC and exciplex formation of DMAS or P(DMAS) with C_(60) were alsostudied.     

CURING KINETICS AND PROPERTIES OF ACRYLIC RESIN CURED WITH AZIRIDINE CROSSLINKER

A kind of aziridine crosslinkers was synthesized and used to crosslink acrylate copolymers. The crosslinkingproperties and curing kinetics of the resin were studied. It was found that with the increase of the content of crosslinker in theemulsion, the mechanical properties and solvent resistance of the resin will be apparently improved, but its glass transitiontemperature (T_g) is very low. The lowest amount of crosslinker used in the acrylic resin emulsion is 0.25%. Curing kineticsstudied by DSC show that this curing reaction occurs readily because the apparent activation energy of the reaction is low(65.1 kJ/mol). These results demonstrate that the aziridine crosslinker is indeed a low temperature crosslinking agent and canbe used at room temperature.     

三核钨钼簇合物对苯乙烯氧化反应的催化

关于烯烃的催化氧化,报道较多。Takao等研究了苯乙烯在Ir和Rh络合物存在下的氧化反应;Collman曾报道环己烯在Vaska络合物[IrX(CO)(PPh_3)_2]催化下氧化成环己酮和环已烯氧化物。本文采用Cotton合成的簇合物[W_3O_2(CH_3CO_2)_6(H_2O)_3]Br_2·     

Determination of the specific interaction of disubstituted aromatic compounds on hydrous zirconium oxide-loaded porous polymer resin

Summary A porous polymer resin loaded with hydrous zirconium oxide (Zr-gel) was evaluated as a stationary phase for the liquid chromatographic separation of disubstituted aromatic compounds. The prepared Zr-gel was used to separate disubstituted phenols andortho-substituted benzoic acid derivatives in reversed-phase mode. The retention time of catechol was greater than those of other disubstituted phenols; this implies that the Zr-gel has specificity for the phenolic hydroxyl group. The retention behavior ofortho-substituted benzoic acid derivatives on the Zr-gel was also evaluated in reversedphase mode using buffer. Phthalic acid was specifically retained in the vicinity of pH 6.0, which has been regarded as the equal adsorbic point. Similar behavior was also observed for salicylic acid, although the retention time of salicylic acid was less than that of phthalic acid. It seems that the specific retention behavior of hydrous zirconium oxide is a result of complexation with ligands such as hydroxyl and carboxyl groups. The results of this study have revealed that the retention mechanism of hydrous zirconium oxide is a combination of ion exchange and interaction based on complexation with ligands.     

Cationic amino-containing N-isopropyl- acrylamide–styrene copolymer latex particles: 1-Particle size and morphology vs. polymerization process

 Cationic hydrophilic copolymer latexes were synthesized at 70 °C either by batch or two-step emulsifier-free emulsion poly-merization of styrene (St), N-iso-propylacrylamide (NIPAM), and aminoethylmethacrylate hydro-chloride (AEM) using 2,2′-azobis (2-amidinopropane) dihydrochloride as initiator. At first, batch polymerization kinetics were followed by gas chromatography (GC), revealing that NIPAM rapidly homopolymerized, before the polymerization of styrene had started. Particle size analysis by quasi-elastic light scattering (QELS) and transmission electron microscopy (TEM) showed that monodispersed particles were obtained with the formation of a poly[NIPAM] rich shell. Adding a small amount of the cationic monomer caused a strong decrease of the particle size without affecting the size monodispersity. When a shot process was used, a narrow particle size distribution was maintained, provided that the monomer addition was performed at a relatively high conversion of the first batch step. The poly[NIPAM] rich shell layer was larger with the shot process, but increasing the amino-containing monomer in the recipe resulted in a dramatic decrease of the thickness. Combination of transmission, scanning and atomic force microscopy techniques showed that these hydrophilic particles exhibited odd-shaped structures, the unevenness being dependent upon the performed process. Kinetic data and particle morphology information were inferred for discussion of the polymerization mechanism of this system. Received: 21 August 1997 Accepted: 22 October 1997     

PROGRESS IN PHASE INVERSION EMULSIFICATION FOR EPOXY RESIN WATERBORNE DISPERSIONS

In this review, our recent work in phase inversion emulsification （PIE） for polymer （especially epoxy resin） waterborne dispersions is summarized. Based on experimental results about PIE process, the physical model is proposed which can guide the synthesis of the waterborne dispersions such as polymer/nanoparticle composite dispersion. In the presence of a latent curing catalyst, PIE can give a crosslinkable epoxy resin waterborne dispersion. The dispersions can form cured transparent coatings with some unique properties such as UV shielding. They are promising in functional coatings, waterborne resin matrices for composites, and sizing for high performance fibers.     

带甲基侧基的环氧树脂增容剂对炭黑在丁苯橡胶中分散度的影响

用自制的带甲基侧基的环氧树脂(TMBP)作为界面增容剂, 从拉伸性能、键合胶含量、动态性能、扫描电镜和流变性能等方面, 研究了TMBP对炭黑在丁苯橡胶中分散度的影响, 并与市售通用双酚A型环氧树脂(E-51)和橡胶工业常用软化剂邻苯二甲酸二辛酯(DOP)进行了比较. 结果表明, 带甲基侧基的环氧树脂TMBP在提高炭黑分散性方面的效果远比E-51好， 其作用模式具有典型的增容特性.     

气相色谱-质谱联用测定苯乙烯中的阻聚剂对叔丁基邻苯二酚

 建立了气相 质谱联用 (GC/MS)测定苯乙烯中阻聚剂对叔丁基邻苯二酚含量的方法。苯乙烯样品直接进样 ,通过毛细管柱 (HP 1,30m× 0 32mmi.d .× 0 2 5 μm)分离 ,由电子轰击 (EI)源于选择离子监测 (SIM)模式下进行检测。结果表明 ,对叔丁基邻苯二酚含量在 5mg/kg～ 5 0mg/kg时线性关系良好 (r2 =0 9987) ,回收率高 ;与美国材料测试标准ASTMD4 5 90中的分光光度测量法比较具有操作简捷、准确度高的特点。     

核／壳结构增韧剂对环氧树脂的抗冲改性

核／壳结构增韧剂对环氧树脂的抗冲改性张明耀，张会轩，杨海东，冯之榴（吉林工学院化学工程系长春１３００１２）（中国科学院长春应用化学研究所长春）关键词核／壳结构，增韧剂，环氧树脂，共混核／壳结构增韧剂是用分步乳液聚合技术制造的一种复合乳胶粒子，其核为橡...