Conductometry and Thermodynamics Study of Metal Dodecyl Sulfates in Aqueous Solution

The aggregation behavior of metal dodecyl sulfates (MDS), [Na¹⁺, Mg²⁺, Mn²⁺, Co²⁺, and Ni²⁺] in water has been studied by electrical conductivity (at 293.15–333.15 K) and surface tension methods (at 303.15 K). Critical micelle concentrations (CMCs), degree of counterion dissociation (β) evaluated from conductivity data. Using law of mass action model, the thermodynamic parameters viz. Gibbs energy (ΔG_m ⁰), enthalpy (ΔH_m ⁰), and entropy (ΔS_m ⁰) were evaluated. The enthalpy of micellization decreases strongly with increasing temperature. ΔG is always negative (thermodynamically favored process) and slightly temperature and counterion dependent. Gibbs energy and entropy exploit micellization as thermodynamic favorable process. The electrostatic repulsions between ionic head groups, which prevent the aggregation, are progressively screened as the ionic character decreases with the size of the counterion. The plots of differential conductivity, (dk/dc) _T,P , versus the total surfactant concentration enables us to determine the CMC values more precisely than the conventional method. Surfactants with strong condense counterion are adapted to rodlike micelle better than to a spherical micelle. The data are explained in terms of molecular characteristics of surfactants viz. degree of dissociation, polar head group size and counterion.     

Evaluation of Pomegranate (Punica Granatum L.) Pulps for the Removal of Copper(II) Ions: Kinetic,Equilibrium, and Desorption Studies

Pomegranate pulp has been used as novel adsorbent for removing Cu(II) ions from aqueous solution. The optimum conditions for removal of Cu(II) ions were found to be pH 5.32, biosorbent dose 0.1 g, contact time 120 minutes, initial concentration 50 mg/L, and temperature 30°C. The kinetic data were well fitted to the pseudo-second-order model. The biosorption process agreed with the Langmuir isotherm model. Maximum monolayer biosorption capacity was 7.30 mg/g. Thermodynamic parameters suggest that the biosorption process is spontaneous and exothermic. Desorption studies were carried out with different desorbing agents.      

The Research of Sulfuric Acidic Recycling of Aluminum Industry Fluorine-containing Waste Products

The article presents the method of recycling aluminum industry fluorine-containing waste products to produce hydrogen fluoride. We carried out the estimate of the thermodynamic parameters of sulfuric acidic recycling of fluorine-containing waste products. We considered the necessity of waste products preliminary oxidizing roast stage to reduce carbonic constituent due to the interaction between carbonic constituent blocks of the sulfuric acid and waste products. We also carried out the researches for kinetic characteristics and to determine the optimal conditions for the to recycle sulfuric acidic in the fluorine-containing waste products.     

Hydrogen storage over alkali metal hydride and alkali metal hydroxide composites

Alkali metal hydroxide and hydride composite systems contain both protic(H bonded with O) and hydridic hydrogen. The interaction of these two types of hydrides produces hydrogen. The enthalpy of dehydrogenation increased with the increase of atomic number of alkali metals,i.e.,-23 kJ/molH2 for LiOH-LiH, 55.34 kJ/molH2 for NaOH-NaH and 222 kJ/molH2 for KOH-KH. These thermodynamic calculation results were consistent with our experimental results. H2 was released from LiOH-LiH system during ball milling. The dehydrogenation temperature of NaOH-NaH system was about 150℃; whereas KOH and KH did not interact with each other during the heating process. Instead, KH decomposed by itself. In these three systems, NaOH-NaH was the only reversible hydrogen storage system, the enthalpy of dehydrogenation was about 55.65 kJ/molH2, and the corresponding entropy was ca. 101.23 J/(molH2 K), so the temperature for releasing 1.0 bar H2 was as high as 518℃, showing unfavorable thermodynamic properties. The activation energy for hydrogen desorption of NaOH-NaH was found to be57.87 kJ/mol, showing good kinetic properties.     

Chitosan/UiO-66 composites as high-performance adsorbents for the removal of methyl orange in aqueous solution

UiO-66 and chitosan/UiO-66 composites were successfully synthesized by varying the mass addition of chitosan which were 0%, 2.5%, 5%, 10%, and 20% of the mass of UiO-66, denoted as UiO-66, Cs(2.5)/UiO-66, Cs(5)/UiO-66, Cs(10)/UiO-66, and Cs(20)/UiO-66, respectively. UiO-66 was modified with chitosan using the impregnation process. The X-ray diffraction patterns of the synthesized materials showed characteristic peaks at 2θ of 7.25° and 8.39°, which matched to that of the reported UiO-66. In addition, the Fourier transform infrared spectroscopy spectra of the materials showed absorption bands at the same wavenumber as UiO-66 and chitosan previously reported. The surface morphology of UiO-66 observed from scanning electron microscopy images was in the form of agglomerated small cube particles, where the smaller particles were observed for Cs(10)/UiO-66. From the N₂ adsorption isotherms, it was found that the Brunauer-Emmett-Teller surface areas of UiO-66, Cs(5)/UiO-66, and Cs(10)/UiO-66 materials were 825.7 m²/g, 835.4 m²/g, and 882.2 m²/g, respectively. The results of the study on adsorption of methyl orange in aqueous solutions showed that Cs(5)/UiO-66 had the highest adsorption capacity of 370.37 mg/g and followed the pseudo–second-order adsorption kinetic with a Langmuir isotherm model.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

基于(火积)理论的“+”形高导热构形通道实验研究

基于构形理论和■理论,对"+"形高导热通道的方形构造体开展导热实验研究,并对不同优化目标和不同高导热通道布置形式下的构造体导热性能进行比较.结果表明:对于"+"形高导热通道的方形构造体,实验和数值计算所得到的构造体最高温度点均位于"+"形高导热通道两分支之间,实验和数值计算所得到的构造体平均温差和■耗散率的误差均在可接受范围内,这从定性和定量的角度证明了导热构形优化结果的正确性.与"H"形高导热通道的方形构造体相比,构造体内高导热通道采用一级"+"形布置使得其导热■耗散率得到降低.■耗散率最小的一级"+"形高导热通道构造体最优构形与最大温差最小的构造体最优构形相比,前者的导热■耗散率降低了5.98%,但最大温差提高了3.57%.最大温差最小目标有助于提高构造体的热安全性,■耗散率最小目标有助于提高构造体的整体导热性能.在保证热安全性能的前提下,实际微电子器件设计中可采用■耗散率最小的构造体最优构形以提高其整体导热性能.     

双功能化磁性纳米修复剂对多重金属的快速、高效钝化行为

采用“一锅法”制备了四氧化三铁/半胱氨酸（Fe₃O₄/Cys）磁性纳米微球,随后对Fe₃O₄/Cys进行亚氨基二乙酸（IDA）修饰得到Fe₃O₄/Cys/IDA磁性双功能化纳米微球。研究发现Fe₃O₄/Cys中的L-Cys是通过—SH基团接枝到Fe₃O₄表面的,随后IDA分子中的羧基与Fe₃O₄/Cys中的—NH₂形成酰胺键,最终形成多支链多羧基的Fe₃O₄/Cys/IDA磁性纳米修复剂。基于修复剂表面短支链-长支链交替的多羧基结构,实现了羧基基团的高密度接枝。同时,Fe₃O₄/Cys/IDA磁性纳米微球对Pb²⁺、Cd²⁺、Cu²⁺、Co²⁺、Ni²⁺、Zn²⁺为专性吸附,而对Hg²⁺属于非专性吸附,且吸附重金属后得到的钝化产物均表现了良好的稳定性。另外,Fe₃O₄/Cys/IDA对重金属离子的吸附符合Langmuir模型,属于单层均相吸附,其吸附过程符合准二级动力学模型,最大吸附量为49.05 mg·g^-1。     

Thermodynamically equilibrium roton states of nanoparticles in molten and vapour phases

We show a possibility for a thermodynamically equilibrium nanocrystalline structure consisting of nanosized solid inclusions to appear in a melt just beyond the melting curve. Thermodynamic stability of the nanocrystalline structure in the melt results from the free energy lowering due to rotational motion of nanoparticles. The main contribution to the reduction of the free energy of the system is due to an increase in the rotational entropy and change in formation energy of nanocrystals, i.e. the nanocrystalline structure in the melt, like vacancies in a crystal, is an equilibrium defect structure of the melt. It is demonstrated that similar nanocrystalline structures can also appear in the vapour phase in the form of liquid nanodrops and in liquid solutions, e.g. in He II.