Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

一种新颖有机-无机杂化配位聚合物[(C10H16N)2（Pb2I6）·2DMF·H2O]n的自组装合成和晶体结构(英)

A novel coordination polymer [(C₁₀H₁₆N)₂（Pb₂I₆）·2DMF·H₂O]_n (C₁₀H₁₆N=N-butyl-2-Methy-Pyridinium) was synthesized by the reaction of Pb(NO₃)₂ with C₆H₁₀NI at room temperature in DMF solvent and structurally characterized by means of X-ray single diffraction. The title compound crystallizes in triclinic system, space group P1 with a=1.1237(2) nm, b=1.25330(16) nm, c=0.808 00(12) nm, α=102.523(4)°, β=92.475(5)°, γ=95.712(10)°, V=1.102 9(3) nm³, Z=1, D_c=2.470 Mg·m^-3, F(000)=738, chemical formula C₂₆H₄₈N₄O₃Pb₂I₆ and M_r=1 640.46, μ（MoKα）=11.849 mm^-1, the final R=0.057 8 and wR=0.166 5 for 3716 observed reflections with I > 2σ(I). The title compound consists of cations ([(C₁₀H₁₆N)⁺] and anion chain(PbI₃^-),they are combined by static attracting forces in the crystal. DMF and H₂O locate between the organic and inorganic moiety. CCDC: 210812.     

季铵盐固相催化使聚氯乙烯脱HCl

通过将季铵盐与聚氯乙烯(PVC)混溶成膜,使其在固相脱HCl,研究了催化剂对PVC脱HCl反应速度和产物结构的影响以及固相反应与温度、时间的关系.发现在催化性能上下基铵盐比乙基铵盐好得多,根据实验结果提出了季铵盐通过分解成叔胺实现催化的机理.     

Oxidative free radical reactions of enamino esters

Oxidative free radical reactions of enamino esters are described. Electrophilic carbon-centered radicals produced by the cerium(IV) ammonium nitrate (CAN) oxidation of β-dicarbonyl compounds undergo efficient addition to the C-C double bond of enamino esters. This CAN mediated free radical reaction between enamino esters and β-dicarbonyl compounds provides a novel method for the synthesis of highly substituted pyrroles. The direct CAN oxidation of β-enaminocinnamates gave the dimerization products effectively.     

硫氰酸甲基三烷基季铵盐萃取Co（Ⅱ）的动力学

有关Co(Ⅱ)、Ni(Ⅱ)萃取分离的研究一直受到人们的重视。Preston报导了硫氰酸季铵盐(Q~ SCN-)萃取Co(Ⅱ)、Ni(Ⅱ)的平衡研究,认为Co(Ⅱ)的萃合物组成为Q_2Co(SCN)_4.本文用上升液滴法技术考察了Co(Ⅱ)/0.10mol·L~(-1)SO_4~(2-)/QSCN-煤油体系在298±1K条件下萃取速率R与CoSO_4、SO_4~(2-)和QSCN浓度的关系,确定了正向初始萃取速率方程,拟定了速控步骤。     

含松香骨架的新型手性季铵盐相转移催化剂的合成及其在不对称环氧化反应中的应用

以天然松香为原料合成了4个新型手性季铵盐类相转移催化剂, 并用于催化不对称查尔酮环氧化反应, 发现这类手性相转移催化剂可以有效地催化查尔酮的不对称环氧化, 环氧化产物ee最高达20%.     

高水相W／O型乳化膏体油膜稳定性的研究

高水相Ｗ／Ｏ型乳液是指水相体积占７４％以上，属于高度不稳定的分散体系［１，２］．乳化炸药的问世，使这种高水相Ｗ／Ｏ型乳液有了新的实际应用．这种炸药是９０％～９５％重的硝酸铵盐（占水相８０％～９０％重）水溶液高度分散在５％～１０％的油相中构成Ｗ／Ｏ型乳...     

功能性超薄有序分子沉积膜的制备及其结构研究

1991年G.Decher等首次探讨了阴阳离子与聚电解质交替沉积制备有机超薄膜的方法。我们在完善成膜技术和发展成膜基质的基础上,详细研究了其成膜过程与膜的结构,并定义这种新的自组装超薄有序膜为分子沉积膜——MD膜。MD膜是利用阴阳离子的静电吸附反应特性,通过相反离子体系的交替分子沉积制备的层状有序自组装多层超薄膜。需要指出的是,分子沉积既是有机超薄膜的制备技术,本身又是一种自组装超薄有序膜。MD膜制备工艺简单,热稳定性和长期稳定性好,不受基体形状与面积限制。     

聚合物催化剂——Ⅰ.季铵盐聚合物试剂作三氯乙酸分解的催化剂

本文合成了一些季铵盐聚合物试剂,研究了这些试剂对三氯乙酸分解生成三氯乙酰氯的催化作用。不同季铵盐聚合物催化剂对三氯乙酸分解的催化活性顺序如下: (?) (?) 聚合物催化剂经重复使用后,活性并无明显降低。     

Evaluation of dissociation constants of ammonium ion in aqueous lithium perchlorate and lithium chloride-sodium chloride mixed solutions

The Pitzer approach has been applied to the evaluation of dissociation constants of ammonium ion in lithium perchlorate and lithium chloride-sodium chloride mixed solutions at 25°C. The calculated values showed good agreement with the observed values, provided all the higher-order interaction terms ('s and 's) concerned were introduced. The unknown (NH₄LiClO₄) value was determined from the isopiestic measurements of NH₄ClO₄–LiClO₄ mixed solutions. Parameters in the Pitzer formalism for ammonia-ion interactions involved in LiCl and NaCl media were determined by use of the activity coefficients of ammonia measured in LiCl–NaCl mixed solutions by a transpiration method.