TG and DSC study of the properties of coked molecular sieve catalyst

A cracking catalyst designatedSRNY was manufactured from a commercialSRNY molecular sieve (M.S.). The support consisted of kaolin, clay and SiO₂. The coking behaviour of theSRNY M.S., the support and the catalyst were examined with light diesel oil (LDO) as feedstock in a microreactor. The physico-chemical properties of both fresh and aged samples, subjected to or not subjected to the cracking reaction ofLDO, were sequentially characterized by means of pore structure determination and thermal analysis. The pore structure included the specific surface area and the pore volume or porosity. Thermal analysis methods used included TG and DSC. The results indicated that all coked samples exhibited obvious changes in surface pore structure and acidity in comparison with non-coked samples. Their specific surface area and acid amount decreased with increase in the coke content of the samples. The apparent activation energy data obtained from decoking samples in an air flow, using the temperature-programmed oxidation (TPO) method, showed that the kinetic parameters of theSRNY M.S. differed from those of theSRNY catalyst and its support.     

Arenesulfonylimines of methyl trifluoropyruvate in the cyclocondensation reactions with 1,3-C,N-and-N,N-binucleophiles

Reaction of arenesulfonylimines of methyl trifluoropyruvate with 1,3-C,N-and-N,N-binucleophiles led to a variety of N-sulfonylated fluorine-containing heterocycles, including the fused ones. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2171–2175, November, 2007.     

巴旦杏中脂肪酸的测定

采用气相色谱仪进行定量分析，气－联质联用仪进行定性分析，巴旦杏中脂肪酸进行了测定，并探讨了样品处理方法和气－质联用仪的分析条件，得到了较为满意的分析结果。     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Studies on the Synthesis and Properties of K_8[TiP_2W_17O_62]·12H_2O

The present paper covers a salt of 2:18 heteropoly complex of tungstotitanophosphate prepared with the method of improved sequence preparation. The title compound was characterized by elemental analysis, 31P NMR spectra, polarography, cyclic voltammetry, IR, UV, X-ray powder diffraction , X-ray photoelectron spectra and TG-DTA analysis. The results show that the complex with the formula K8[TiP2W17O62]·12H2O has Dawson structure. Its properties such as spectra, redox behavior and thermal stability are discussed.     

Radical Couplings as Key Steps for the Preparation of Derivatives of Nonactic Acid

Summary. Free radical couplings from furan, as cheap starting material, were studied in view of developing a rapid strategy en route to the synthesis of derivatives of nonactin. The chain containing the alcohol function was introduced in one or two steps in 86% yield. For the introduction of the second chain with the ester function two different coupling methods were tested. Starting from the advanced intermediates obtained nonactin derivatives can be prepared by catalytic hydrogenation of the furan ring.     

Studies on O-,N-Acylation of 3-Hydroxyisoxazole and Their Regioselective Synthesis(Ⅰ)——O-,N-acylation of 5-Methyl-3-hydroxyisoxazole with 2,2-Dimethyl 3-Substituted Cyclopropanecarboxylic Chlorides

The reactions of 5-methyl-3-hydroxyisoxazole with 2, 2-dimethyl, 3-substituted cyclopropanecarboxylic chlorides give O-acyl-5-methyl-3-hydroxyisoxazole and N-acyl-5-methylisoxazolin-3-one derivatives. The ratio of O-acyl to N-acyl product depends upon the acylation reagents. O-acyl derivatives can be converted to the N-acyl compounds by isomerization under acidic conditions or heating.     

Optimization of lantadenes isolation and preparation of 22 β-hydroxyoleanonic acid

The lantadenes fraction from Lantana camara was isolated and transformed to the medicinally important intermediate 22β-hydroxyoleanonic acid. The compound was studied for hepatotoxicity using lantadene A as standard and found to be nontoxic. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 357–358, July–August, 2006.     

Melting of heterogeneous vortex matter: The vortex ‘nanoliquid’

Disorder and porosity are parameters that strongly influence the physical behavior of materials, including their mechanical, electrical, magnetic and optical properties. Vortices in superconductors can provide important insight into the effects of disorder because their size is comparable to characteristic sizes of nanofabricated structures. Here we present experimental evidence for a novel form of vortex matter that consists of inter-connected nanodroplets of vortex liquid caged in the pores of a solid vortex structure, like a liquid permeated into a nanoporous solid skeleton. Our nanoporous skeleton is formed by vortices pinned by correlated disorder created by high-energy heavy ion irradiation. By sweeping the applied magnetic field, the number of vortices in the nanodroplets is varied continuously from a few to several hundred. Upon cooling, the caged nanodroplets freeze into ordered nanocrystals through either a first-order or a continuous transition, whereas at high temperatures a uniform liquid phase is formed upon delocalization-induced melting of the solid skeleton. This new vortex nanoliquid displays unique properties and symmetries that are distinct from both solid and liquid phases.     

BF3-doped polyaniline: A novel conducting polymer

We review the unusual structural, transport and magnetic properties of highly conducting polyaniline, doped with boron trifluoride. Our studies establish the unique conducting state of this system, which is in distinct contrast with the conventional proton-doped polyaniline samples.