钒掺杂TiO2/AC负载催化剂的制备及光催化活性

以TiO2为主要成分的光催化剂的研究已日益受到人们的广泛关注[1-6]。但TiO2粉末的回收和流失问题难以解决,固定化TiO2负载催化剂的研制是解决这一问题的有效手段[2-6]。从实际应用的观点看,TiO2的光催化剂活性还有待进一步提高。研究发现,大多数过渡金属离子和少数非金属离子的     

Preparation and characterization of silicate gel glasses containing Cr2O3

The effect of thermal treatment on the structural incorporation of Cr₂O₃ in xCr₂O₃·(100 – x)SiO₂ and 5R _n O·xCr₂O₃·(95 – x)SiO₂ (where x=0.01–1 mol.% and R=Li, Na and Ca) gel glasses was studied by optical absorption spectrophotometry, DTA-TG, XRD and electron microscopy.Samples heat treated at 60°C have green color due to the presence of Cr³⁺ in octahedral coordination. The optical transmission, and color (yellow, orange or ambar), of the samples heat treated between 200 and 700°C prove that Cr³⁺ (octahedrally coordinated) and Cr⁶⁺ (tetrahedrally coordinated) are both present. Segregation of Cr₂O₃ take place at temperatures above 800°C.In reducing conditions the gel glasses were green due to the presence of a high content of Cr³⁺ ions. Samples containing Li or Na show crystalline phases at temperatures below 850°C.     

Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.     

Characterization of Sol-gel bioencapsulates for ester hydrolysis and synthesis

Candida rugosa lipase was entrapped in silica sol-gel particles prepared by hydrolysis of methyltrimethoxysilane and assayed by p-nitrophenyl palmitate hydrolysis, as a function of pH and temperature, giving pH optima of 7.8 (free enzyme) and 5.0–8.0 (immobilized enzyme). The optimum temperature for the immobilized enzyme (50–55°C) was 19°C higher than for the free enzyme. Thermal, operational, and storage stability were determined with n-butanol and bytyric acid, giving at 45°C a half-life 2.7 times greater for the immobilized enzyme; storage time was 21 d at room temperature. For ester synthesis, the optimum temperature was 47°C, and high esterification conversions were obtained under repeated batch cycles (half-life of 138 h).     

Condensation reaction of 3-(methacryloxypropyl)-trimethoxysilane and diisobutylsilanediol in non-hydrolytic sol-gel process

The condensation reaction of 3-methacryloxypropyl-trimethoxysilane (MPTS) and diisobutylsilanediol (DIBSD) in a non-hydrolytic sol-gel process was investigated in terms of the reaction time and the catalyst amount for fabrication of inorganic-organic hybrid materials. The degree of condensation, which was characterized by ²⁹Si NMR, ¹H NMR and Abbe refractometry, increases with increased the reaction time and greater catalyst amount. However, a the large catalyst amount breaks the methacryl group during the condensation reaction. Thus, the reaction time and the catalyst amount were optimized to synthesize the condensed methacryl oligosiloxanes.     

Effect of Glass Substrates on the Formation of Gold-Silver Colloids in Nanocomposite Thin Films

A sol-gel route to synthesize nanocomposite thin films containing phase separated metal colloids of gold (Au) and silver (Ag) was developed. Ag—Au colloids were prepared in silica films using dip coating technique. The annealing of the samples in air results in the formation of phase separated Ag and Au colloids in SiO₂ thin films, showing the surface plasmon peaks at 410 nm and 528 nm. For the synthesis of phase separated Ag and Au colloids on float glass substrates, formation of the silver colloids was found strongly dependent on the surface of the float glass. On the tin rich surface formation of both gold and silver colloids took place, whereas, on the tin poor surface the formation of only gold colloids was observed. The surface dependence of the formation of silver colloids was attributed to the presence of tin as Sn²⁺ state on the glass surface, which oxidizes into Sn⁴⁺ during heat treatment, reducing Ag⁺ into silver colloids.     

V2O5/TiO2 Catalytic Xerogels Raman and EPR Studies

Raman spectroscopy and Electron Paramagnetic Resonance (EPR) studies were performed on a series of V₂O₅/TiO₂ catalysts prepared by a modified sol-gel method in order to identify the vanadium species. Two species of surface vanadium were identified by Raman measurements, monomeric vanadyls and polymeric vanadates. Monomeric vanadyls are characterized by a narrow Raman band at 1030 cm^–1 and polymeric vanadates by two broad bands in the region from 900 to 960 cm^–1 and 770 to 850 cm^–1. The Raman spectra do not exhibit characteristic peaks of crystalline V₂O₅. These results are in agreement with those of X-ray Diffractometry (XRD) and Fourier Transform Infrared (FT-IR) previously reported (C.B. Rodella et al., J. Sol-Gel Sci. Techn., submitted). At least three families of V⁴⁺ ions were identified by EPR investigations. The analysis of the EPR spectra suggests that isolated V⁴⁺ ions are located in sites with octahedral symmetry substituting for Ti⁴⁺ ions in the rutile structure. Magnetically interacting V⁴⁺ ions are also present as pairs or clusters giving rise to a broad and structureless EPR line. At higher concentration of V₂O₅, a partial oxidation of V⁴⁺ to V⁵⁺ is apparent from the EPR results.     

链珠状氢氧化亚镍的准电容特性及其在复合型超电容器中的应用(英)

本文采用溶胶凝聚方法制备了超细氢氧化亚镍电极材料并通过在其中掺加适量碳纳米管的方法大大提高了电极的比容量并有效改善了电极材料的阻抗特性。掺有20%碳纳米管的氢氧化亚镍复合电极材料的单电极比容量可达到320 F·g^-1。本文分别采用氢氧化亚镍/碳纳米管复合电极作为正极，活性炭作为负极，6 mol·L^-1 KOH作为电解液制备了复合型电化学电容器。采用上述方法制备的复合型电容器工作电压达到1.6 V，电容器质量比容量达到60 F·g^-1。复合型电容器能量密度达到20.11 Wh·kg^-1，最大功率密度达到8.6 kW·kg^-1,兼具高能量特性和优良的大电流放电特性。     

Three-dimensional configurations of organic/inorganic hybrid nanostructural blocks (I). A quantum mechanical investigation for ladder-like structure of vinylsilsesquioxane

Silsesquioxanes (SSO) or polyhedral oligomericsilsesquioxanes (POSS) are generally prepared frommolecular precursors using the hydrolytic condensa-tion of trialkoxysilane, RSi(OR')3. They are organic/inorganic hybrid nanostructural blocks with theircomplete general formula Tn(T = RSiO1.5, n = 1,2, …), and the incomplete generic formula is Tn-(OH)x(OR')y[x, y = 0, 1, 2, …, T= RSiO1.5 ?(x+y)/2n][1,2].Each VSSO, possessing a certain structural formulaand molecular weight, may h…     

Color Displays with Gel-Glass Dispersed Liquid Crystals

Liquid crystal microdroplets trapped into silica gel-glasses by sol-gel processes may be used for display applications. Gel-glass dispersed liquid crystals (GDLC) are switched between opaque and transparent states by applying external AC-voltage signals; no polarizers are required. The feasibility of applying these materials to colored displays has been explored. A comparative study of different dyes for GDLC color displays, which were either embedded in the sol-gel matrix or dissolved in the liquid crystal microdroplets is presented.