可降解聚合物/层状硅酸盐纳米复合材料的研究进展

作为一类性能优良的环保功能材料，生物降解性聚合物/层状硅酸盐（BPLS）纳米复合材料正日益引起人们的关注。本文综述了BPLS纳米复合材料的制备途径、结构表征方法及其性能特点，同时对其应用前景作了展望。     

Zinc silicate-bonded diethyldithiocarbamate — a selective adsorbent for separating transition metal ions and preconcentration of palladium(II)

Summary A new chelating adsorbent, zinc silicate-bonded diethyldithiocarbamate (DTC) has been prepared for the separation and preconcentration of some transition metal ions. The distribution coefficients (Kd values) of 15 metal ions have been estimated in solution at various pH's and some quantitative separations have been achieved. The high selectivity for Pd(II) has been utilized for its preconcentration from dilute aqueous solutions; quantitative elution is effected with acidic 4% thiourea solution.     

Heterogeneous oxidation of cyclohexanone catalyzed by TS-1:Combined experimental and DFT studies

The reaction mechanism of the oxidation of cyclohexanone catalyzed by titanium silicate zeolite TS-1 using aqueous H2O2 as the oxidant was investigated by combining density function theory (DFT) calculations with experimental studies. DFT calculations showed that H2O2 was adsorbed and activated at the tetrahedral Ti sites. By taking into account the adsorption energy, molecular size, steric hindrance and structural information, a reaction mechanism of Baeyer-Villiger oxidation catalyzed by TS-1 that involves the activation of H2O2 was proposed. Experimental studies showed that the major products of cyclohexanone oxidation by H2O2 catalyzed by a hollow TS-1 zeolite wereε-carprolactone, 6-hydroxyhexanoic acid, and adipic acid. These products were analyzed by GC-MS and were in good agreement with the proposed mechanism. Our studies showed that the reaction mechanism on TS-1 zeolite was different from that on Sn-beta zeolite.     

P-Al/NaX结构和酸碱性位调控对甲苯甲醇侧链烷基化性能影响

采用水热法原位合成了P-Al/NaX催化剂,然后通过浸渍NaOH对其进行酸碱性调控,并探究了它在甲苯甲醇侧链烷基化反应中的催化性能。结合X射线衍射（XRD）、X射线光电子能谱（XPS）、N₂吸附-脱附等表征及催化活性数据发现,原位负载P、Al后,合成的磷铝硅酸盐（Na₁₃Al₂₄Si₁₃P₁₁O₉₆·H₂O）结构展现出较好的甲苯甲醇侧链烷基催化活性;随着NaOH负载量的增加,乙苯和苯乙烯的选择性呈先上升后下降的趋势,当负载质量分数为9%的NaOH时,苯乙烯选择性为45.84%,乙苯和苯乙烯的收率之和达到63.08%。这可能是由于NaOH的负载有利于催化剂表面碱性的提高和酸性的降低,而高的强碱性位和弱酸性位数量有利于甲苯甲醇侧链烷基化反应的进行。     

A re-investigation of the crystal structure and luminescence of BaCa2MgSi2O8:Eu

Barium calcium magnesium silicate (BaCa₂MgSi₂O₈), a compound whose space group was obtained via X-ray diffraction data, was re-investigated using neutron diffraction techniques. A combined powder X-ray and neutron Rietveld method revealed that BaCa₂MgSi₂O₈ crystallizes in the trigonal space group P3? (Z=1, a=5.42708(5) Å, c=6.79455(7) Å, V=173.310(4) Å³; R_p/R_wp=5.52%/7.63%), instead of the previously believed space group P3?m1. The difference in the two structures arises from the displacement of the O2 atom. Blue emission from Ba_0.98Eu_0.02Ca₂MgSi₂O₈ under 325-nm excitation is ascribed to the 4f⁶5d¹→4f⁷ transitions of Eu²⁺ ions at Ba sites and Ca sites. Site assignment of Eu²⁺ ions in the titled compound was performed by analysis of emission spectra at temperatures in the range of 4.2-300 K.     

凝胶渗透色谱对二次催化溶胶-凝胶法制备硅胶微球过程的监控

采用凝胶渗透色谱法(GPC),通过对二次催化溶胶-凝胶法制备硅胶微球原料硅酸乙酯 40(TES40)、中间产物聚硅酸乙酯(PES)分子量的在线测定,实现了对反应过程的监控.采用Shodex KF-802凝胶色谱柱,以四氢呋喃为流动相,流速0.5 mL/min,柱温40 ℃,采用示差折光检测器检测.校正曲线为1gMw= ...     

Flame retarded polymer nanocomposites: Development,trend and future perspective

Polymer nanocomposites are a new class of flame retarded materials which have attracted much attention and considered as a revolutionary new flame retardant approach.A very small amount of nano flame retardants (normally < 5 wt%) can significantly reduce the heat release rate (HRR) and smoke emission (SEA) during the combustion of polymer materials.Moreover,the addition of nano flame retardants can also improve the mechanical properties of polymer materials compared with the deterioration of traditional fla...     

Single-crystal X-ray diffraction at megabar pressures and temperatures of thousands of degrees

The most reliable information about crystal structures and their response to changes in pressure and temperature is obtained from single-crystal diffraction experiments. We have developed a methodology to perform single-crystal X-ray diffraction experiments in laser-heated diamond anvil cells and demonstrate that structural refinements and accurate measurements of the thermal equation of state of metals, oxides and silicates from single-crystal intensity data are possible in pressures ranging up to megabars and temperatures of thousands of degrees. A new methodology was applied to solve the in situ high pressure, high temperature structure of iron oxide and study structural variations of iron and aluminum bearing silicate perovskite at conditions of the Earth's lower mantle.     

Properties of laminate composites reinforced with glass fabrics treated with sol-gel transition silicate gel

Glass fabric was treated with sol-gel transition silicate gel to modify the composite interface. Micro roughness on the surface of the glass fabric was observed clearly by the atomic force microscope (AFM) at the surface of glass fabric which had been treated with a base catalytic silicate gel (b-SGSi). The specific surface area of this glass was 1.4 times that of the original glass fabric. The double cantilever beam (DCB) test was carried out on glass epoxy laminate composites, using b-SGSi glass fabrics and standard glass fabrics. In this test, the former laminate showed two fracture modes, stable and unstable crack growth, whereas the latter laminate showed only stable crack growth. In reference to the fracture toughness of the stable crack growth, the former laminate is about 1.4 times greater than that of the latter laminate. It was suspected that the difference was caused by the different interface bonding strength in the composite. The interfacial bonding was also tested by the soldering iron test and substantiated the superiority of b-SGSi glass fabric to standard glass.