Cu(Ⅱ)模板法合成交联壳聚糖缩合水杨醛螯合树脂

壳聚糖可溶于酸性介质中并发生降解［１］,因此,利用壳聚糖制备螯合树脂时,需进行改性,使之转变为不溶不熔的交联型树脂．但交联后的壳聚糖虽不溶于酸,其吸附能力却比交联前明显降低［２］．模板合成法是制备具有一定“记忆”功能的高分子吸附螯合树脂的一种新方法,...     

水杨醛及其衍生物席夫碱配合物制备、性能研究现状

本文综述了水杨醛及其衍生物席夫碱配合物的合成方法及影响因素,阐述了它的生物活性、现场配位标记、放射性金属核素的潜力、杀菌活性,对超氧离子的抑制作用,催化活性等各方面性能,及其在分析化学和应用化学中的应用。     

Synthesis of 2-amino-4-arylamino-6-benzo[<Emphasis Type="Italic">b</Emphasis>]furan-2-yl-1,3,5-triazines

The alkylation of salicylaldehyde and o-hydroxyacetophenone with 2-amino-4-arylamino-6-chloromethyl-1,3,5-triazines is accompanied by intramolecular condensation and affords 2-aryl-4-arylamino-6-benzo[b]furan-2-yl-1,3,5-triazines.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2758–2759, December, 2004.     

Synthesis,Characterization,Thermal Decomposition Mechanism and Non—Isothermal Kinetics of the Pyruvic Acid—Salicylhydrazone and Its Complex of Prasseodymium（Ⅲ）

The pyruvic add‐salicylhydrazone and its new complex of Pr(III) were synthesized. The formulae C₁₀H₁₀N₂O₄ (mark as H₃L) and [Pr₂(L)₂(H₂O)₂]·3H₂O (L= the triad form of the pyruvic acid‐salicylhydrazone [C₁₀H₇N₂O₄]^3‐) were determined by elemental and EDTA volumetric analysis. Molar conductance, IR, UV, X‐ray and ¹H NMR were carried out for the characterizations of the complex and the ligand. The thermal decompositions of the ligand and the complex with the kinetic study were carried out by non‐isothermal thermogravimetry. The Kissinger's method and Ozawa's method are used to calculate the activation energy value of the main step decomposition. The stages of the decompositions were identified by TG‐DTG‐DSC curve. The non‐isothermal kinetic data were analyzed by means of integral and differential methods. The possible reaction mechanism and the kinetic equation were investigated by comparing the kinetic parameters.     

辅酶B12模型化合物的研究——Ⅰ.双水杨醛缩乙二亚胺烷基钴(Ⅲ)配合物Co-C键的性质

本工作合成、表征了一系列辅酶B₁₂模型化合物RCo(Salen)L,其中R=CH₃,C₂H₅,n和i-C₃H₇,n和i-C₄H₉,研究了上述配合物固体和溶液的Co-C键稳定性,结果表明:固体配合物Co-C键断裂的温度受烷基位阻影响,它们具有以下顺序:CH₃>C₂H₅>n-C₃H₇≈n-C₄H₉≈i-C₄H₉≈i-C₃H₇.此外还确定了影响配合物Co-C键在溶液中稳定性的因素.     

水杨醛牛磺酸Schiff碱镝(Ⅲ)配合物的合成表征及热分解动力学研究(英文)

合成了水杨醛牛磺酸Schiff碱与镝(Ⅲ)的配合物,并通过元素分析、红外光谱、X射线粉末衍射及摩尔电导等对其结构进行了表征.在非等温条件下,采用Achar微分法和Coats-Redfern积分法拟合出配合物的热分解动力学方程.     

手性双核Salen配合物的谱学性质

合成了四个新型的手性双核(R,R)Salen配合物[(Cu)2L•H2O(2), (Ni)2L(3), (Zn)2L•H2O(4), (MnCl)2L•2H2O(5)], (其中L是由(R,R)环己二胺、 3,5-叔丁基水杨醛、 5,5’-亚甲基二水杨醛为原料合成的手性二聚Salen配体(1)).用元素分析、NMR、FT-IR、UV-Vis、CD光谱对配体和配合物进行了表征.在与单核的Salen配体和配合物比较的基础上，详细讨论了红外光谱、电子吸收光谱、圆二色光谱性质.发现双核配体和配合物的电子吸收光谱吸收峰的位置和形状与单核的配体和配合物基本一致，而吸收峰的强度有近似两倍的关系.另外， 用激子偶合理论解释了此类手性化合物圆二色谱的Cotton效应和Cotton分裂. Cotton分裂的方向依赖于环己二胺的构象.(R,R)环己二胺决定了Salen化合物的手征性为负， Cotton分裂的正负两部分分别处于高能区和低能区.     

Synthesis and Crystal Structure of a Dinuclear Cu(II) Complex with Tridentate Schiff Base and Azido Bridge

1 INTRODUCTION The azido ligand is an efficient superexchange path-way for propagating magnetic interaction between theparamagnetic centers, such as copper(II), giving di-nuclear, tetranuclear, 1D, 2D and 3D complexes[1～4].The versatility of this ligand due to its diverse bin-ding modes leads to the variation in magnetic pro-perties that depend on its orientation with respect tothe magnetic centers. In general, the bridging modesobserved for the azido group are endtoend and en-don. In…     

Synthesis, Crystal Structure and Characterization of a New Mononuclear Zn(Ⅱ) Complex from Schiff-base Ligand

A new mononuclear [Zn(H-1L)2] (L = 1H-indole-3-ethylene-salicylaldimine) was synthesized through the reaction of Zn(Ac)2, salicylaldehyde and tryptamine in hot ethanol solution and characterized by X-ray crystal structure analysis. The crystal belongs to monoclinic, space group P21/n with a = 15.014(2), b = 10.857(1), c = 17.489(1) , β = 95.49(1)°, V = 2837.8(5) 3, Z = 4, Dc = 1.386 g/cm3, μ = 0.904 mm-1, F(000) = 1232, the final R = 0.0463 and wR = 0.0890 for 4990 independent reflections. In the complex, the Zn2+ ion presents a distorted N2O2 tetrahedral coordination involving two H-1L ligands.     

KF/Al2O3催化下取代水杨醛与达米酮的反应

取代水杨醛与5,5-二甲基-1,3-环己二酮(达米酮)在KF/Al₂O₃催化下反应生成一系列苯并吡喃的衍生物. 产物的结构通过红外光谱、核磁共振氢谱和元素分析进行表征, 并通过X单晶衍射分析进一步证实产物的结构.