Thermodynamics of phenylated polyphenylene between 0 and 340 K

In an adiabatic vacuum calorimeter, the temperature dependence of the heat capacity C _p of phenylated polyphenylene and initial comonomer 1,4-bis(2,4,5-triphenylcyclopentadienone-3-yl)benzene was studied between 6 and 340 K with an uncertainty of about 0.2%. In a calorimeter with a static bomb and an isothermal shield their energies of combustion DUcomb were measured. From the experimental data, the thermodynamic functions C _p ⁰ (T), H ⁰(T)-H ⁰(0), S ⁰(T)-S⁰(0), G ⁰(T)-H ⁰(0) were calculated from 0 to 340 K, and standard enthalpies of combustion ΔH _comb ⁰ and thermodynamic parameters of formation-enthalpies ΔH _f ⁰, entropies ΔH _f ⁰, Gibbs functions ΔG _f ⁰ - of the substances studied were estimated at T=298.15 K at standard pressure. The results were used to calculate the thermodynamic characteristics (ΔH _f ⁰ ,ΔS _f ⁰, ΔG _f ⁰) of phenylated polyphenylene synthesis in the range from 0 to 340 K. This revised version was published online in July 2006 with corrections to the Cover Date.     

The solubilization of alcohols in micellar solutions

The specific conductivities of dodecyldimethylbenzylammonium bromide (C12BBr) have been determined in aqueous butanol and aqueous benzyl alcohol solutions in the temperature range of 5-40°C. From these data the temperature dependent critical micelle concentration (cmc) was determined. The molar fraction of alcohol in the micelle was estimated using the theory suggested by Motomura et al. for surfactant binary mixtures. The thermal properties such as standard Gibbs free energy, enthalpy and entropy of solubilization of alcohols in the micelles were estimated for the phase separation model. The change in heat capacity upon solubilization of alcohol in the micelle has been estimated form the above properties. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamics of hydrogen-isotope-exchange reactions. Proton solvation inn-hexanol and water

This paper reports our results for the direct experimental determination of the equilibrium constant for the hydrogen-isotope-exchange reaction, 1/2D₂(g)+HCl(hexOH)=1/2H₂(g)+DCl(hexOD), where hexOH isn-hexanol and hexOD isn-hexanol with deuterium substitution in the alcohol function. The reaction was studied in electrochemical double cells without liquid junction for which the net cell reaction is the above isotope-exchange reaction. The experimentally determined value of ε° (296.0°K) for this cell is 4.03±0.95 mV (strong electrolyte standard states, mole-fraction composition scale); the value of the equilibrium constant for the reaction is 1.17±0.05. The contributions of isotope-exchange and transfer effects to the magnitude of the standard Gibbs energy change for the above reaction and for the analogous reaction 1/2D₂(g)+HCl(aq)=DCl(daq)+1/2H₂(g) are considered. Our results support the conclusion of Heinzinger and Weston that the formulation of the solvated proton in water as H₃O⁺, as opposed to H₉O₄ ⁺, is sufficient for the interpretation of the thermodynamics of hydrogen-isotope-exchange reactions in water. We also find that the formulation of the solvated proton inn-hexanol as ROH ₂ ⁺ is sufficient for the interpretation of our results on the thermodynamics of hydrogen-isotope-exchange inn-hexanol.     

Calorimetric and thermal decomposition kinetic study of Tb(Tyr)(Gly)<Subscript>3</Subscript>Cl<Subscript>3</Subscript>·3H<Subscript>2</Subscript>O

The solid-state ternary complex of terbium chloride with L-tyrosine and glycine, [Tb(Tyr)(Gly)₃Cl₃·3H₂O], was synthesized and characterized. Using a solution-reaction isoperibol calorimeter, the enthalpy of reaction for the following reaction, TbCl₃·6H₂O(s)+Tyr(s)+3Gly(s)=Tb(Tyr)(Gly)₃Cl₃·3H₂O(s)+3H₂O(l), was determined to be (5.1±0.6) kJ mol^-1. The standard enthalpy of formation of Tb(Tyr)(Gly)₃Cl₃-3H₂O at T=298.15 K has been derived as -(4267.3±2.3) kJ mol^-1. The thermal decomposition kinetics of the complex was studied by non-isothermal thermogravimetry in the temperature range of 325-675 K. Two main mass loss stages existed in the process of the decomposition of the complex, the kinetic parameters for the second stage were analyzed by means of differential and integral methods, respectively. Comparing the results of differential and integral methods, mechanism functions of the thermal decomposition reaction for its second stage were proposed. The kinetic equation can be expressed as: d/dt=Aexp(-E/RT)(1-)². The average values of the apparent activation energy E and pre-exponential factor A were 213.18 kJ mol^-1 and 2.51·10²⁰ s^-1, respectively.     

Standard enthalpy of formation of 3,4,5-trimethoxybenzoic acid

The energy of combustion of crystalline 3,4,5-trimethoxybenzoic acid in oxygen at T=298.15 K was determined to be -4795.9±1.3 kJ mol^-1 using combustion calorimetry. The derived standard molar enthalpies of formation of 3,4,5-trimethoxybenzoic acid in crystalline and gaseous states at T=298.15 K, Δ_fH_m ^Θ (cr) and Δ_fH_m ^Θ (g), were -852.9±1.9 and -721.7±2.0 kJ mol^-1, respectively. The reliability of the results obtained was commented upon and compared with literature values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Some thermodynamic aspects of nitrides in materials science

The energies of combustion in fluorine of gallium nitride and indium nitride in wurzite crystalline structure have been measured in a two-compartment calorimetric bomb, and new standard molar enthalpies of formation have been calculated: Δ_fH_m⁰(GaN(cr) 298.15 K)= –(163.7±4.2) kJ mol^–1 and Δ_fH_m⁰(InN(cr) 298.15 K)= –(146.5±4.6) kJ mol^–1 . Comparison with the recommended values of the Δ_fH_m⁰ nitrides from the literature is also presented.     

Phase-fixed double-group 3-Γ symbols. IV. Real 3-Γ symbols and coupling coefficients for the group hierarchies T* ⊃ C 3 * and T* ⊃ C 2 *

We present sets of real 3- symbols which correspond to explicitly given irreducible matrix representations for the two double group hierarchies T* C ₃ ^* and T* C ₂ ^* . They fit into the formalism exposed in a previous paper [1] on the general theory of 3- symbols and coupling coefficients and illustrate much of the discussion in a subsequent one [2] treating the particular properties of the double groups.     

Thermochemistry of the complexes of chromium nitrate with l-a-amino acids

The solid complexes of Cr(NO₃)₃ with L-α-amino acids (AA=Val, Leu, Thr, Arg, Phe and Try) have been prepared in 95% alcoholic, the compositions of which were identified as the general formula Cr(AA)₂(NO₃)₃·2H₂O by elemental and chemical analyses. The bonding characteristics of the title complexes were characterized by IR, indicating that nitrogen and oxygen atoms in the ligands coordinated to Cr³⁺ in a bidentate fashion. With the aid of TG-DTG and IR techniques, the complexes were subjected to thermal decomposition in an atmosphere of oxygen, presuming that the decompositions of the complexes consist of two steps and the complexes were decomposed into chromium hemitrioxide after undergoing dehydration and skeleton splitting of the complexes. The constant volume energies of combustion of the complexes were determined by a RBC-P type rotating-bomb calorimeter. According to Hess's law, the standard enthalpies of formation of the complexes were calculated as (-1831.40±4.40), (-2542.03±6.13), (-1723.81±3.99), (-2224.31±3.02), (-2911.61±6.53) and (-659.32±7.42) kJ mol^-1, respectively. This revised version was published online in August 2006 with corrections to the Cover Date.     

Determination of benzene, toluene, ethylbenzene and xylenes in air by solid phase micro-extraction/gas chromatography/mass spectrometry

The aim of the study was to analyse BTEX compounds (benzene, toluene, ethylbenzene, xylenes) in air by solid phase micro-extraction/gas chromatography/mass spectrometry (SPME/GC/MS), and this article presents the features of the calibration method proposed. Examples of real-world air analysis are given. Standard gaseous mixtures of BTEX in air were generated by dynamic dilution. SPME sampling was carried out under non-equilibrium conditions using a Carboxen/PDMS fibre exposed for 30 min to standard gas mixtures or to ambient air. The behaviour of the analytical response was studied from 0 to 65 g/m³ by adding increasing amounts of BTEX to the air matrix. Detection limits range from 0.05 to 0.1 g/m³ for benzene, depending on the fibre. Inter-fibre relative standard deviations (reproducibility) are larger than 18%, although the repeatability for an individual fibre is better than 10%. Therefore, each fibre should be considered to be a particular sampling device, and characterised individually depending on the required accuracy. Sampling indoor and outdoor air by SPME appears to be a suitable short-delay diagnostic method for volatile organic compounds, taking advantage of short sampling time and simplicity.     

加速溶剂萃取同步净化-同位素内标-气相色谱-高分辨质谱测定水产品中32种多氯联苯

建立了加速溶剂萃取同步净化-同位素内标-气相色谱-高分辨质谱同时测定水产品中32种多氯联苯含量的方法。通过在加速溶剂萃取仪中加入2 g无水硫酸钠、1 g弗罗里硅土、50 g中性氧化铝作为吸附剂实现同步净化的效果，萃取溶剂为二氯甲烷-正己烷（1:1，v/v），萃取温度为100℃，循环2次。萃取结束后分别用0.5 mL浓硫酸净化两次，净化液浓缩定容后，采用气相色谱-高分辨质谱测定，同位素内标法定量。32种多氯联苯在0.1~20 μg/L范围内平均相对响应因子（RRF）的相对标准偏差（RSD）值（n=7）均小于15%，定量限（S/N=10）为0.3~1.9 ng/kg。在草鱼和海鲈鱼空白基质中做加标回收试验，添加水平为5、20和50 ng/kg，得到的平均回收率为71.9%~119.0%（n=6），RSD为3.5%~19.6%。该方法背景干扰低，灵敏度高，重现性好，回收率稳定，适用于水产品中多氯联苯的检测。