Investigations of precipitates in heat treated AgPd30/CuSn6 layers

The subject of the investigations are precipitation zones, which grew as a result of chemical diffusion in AgPd30/CuSn6 bimetals. These precipitation zones have been characterized by metallography, electron probe microanalysis and x-ray diffraction. The growth of precipitation zones in the plating layer and in the substrate layer in dependence on time have been determined. The use of x-ray diffraction alone for the identification of the precipitates could not supply satisfying results in every case. This problem was solved by the application of electron probe microanalysis using a correction method, which allows the estimation of the chemical composition of small particles.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday     

反应性乳化剂存在下的五元苯丙乳液共聚合

采用反应性乳化剂SE-10N,通过正交实验及单因素实验确定了以苯乙烯、甲基丙烯酸甲酯、丙烯酸丁酯、丙烯酸和丙烯腈为单体的五元无皂苯丙共聚乳液的组成及聚合工艺。所制得的无皂乳液稳定,其乳胶粒大小均匀,粒径为50~60nm,比同组成的有皂乳液乳胶粒的粒径稍小。乳液涂膜透明、硬度达H级;其硬度、耐水性及钙离子稳定性均较同组成有皂乳液的好。     

Addressing the metabolic activation potential of new leads in drug discovery: a case study using ion trap mass spectrometry and tritium labeling techniques

Metabolic activation of drug candidates to electrophilic reactive metabolites that can covalently modify cellular macromolecules may result in acute and/or idiosyncratic immune system-mediated toxicities in humans. This presents a significant potential liability for the future development of these compounds as safe therapeutic agents. We present here an example of an approach where sites of metabolic activation within a new drug candidate series were rapidly identified using online liquid chromatography/multi-stage mass spectrometry on an ion trap mass spectrometer. This was accomplished by trapping the reactive intermediates formed upon incubation of compounds with rat and human liver microsomes as their corresponding glutathione conjugates and mass spectral characterization of these thiol adducts. Based on the structures of the GSH adducts identified, potential sites and mechanisms of bioactivation within the chemical structure were proposed. These metabolism studies were interfaced with iterative structural modifications of the chemical series in order to block these bioactivation sites within the molecule. This strategy led to a significant reduction in the propensity of the compounds to undergo metabolic activation as evidenced by reductions in the irreversible binding of radioactivity to liver microsomal material upon incubation of tritium-labeled compounds with this in vitro system. With the efficiency and throughput achievable with such an approach, it appears feasible to identify and address the metabolic activation potential of new drug leads during routine metabolite identification studies in an early drug discovery setting.     

Methylene-azaphosphirane as a reactive intermediate

Reaction of the transient phosphinidene complexes R-P=W(CO)5 with N-substituted-diphenylketenimines leads unexpectedly to the novel 2-aminophosphindoles, as confirmed by an X-ray crystal structure determined for one of the derivatives. Experimental evidence for a methylene-azaphosphirane intermediate was found by using the iron-complexed phosphinidene iPr2N-P=Fe(CO)4, which affords the 2-aminophosphindole together with the novel methylene-2,3-dihydro-1H-benzo[1,3]azaphosphole. Analysis of the reaction pathways with DFT indicates that the initially formed methylene-azaphosphirane yields both phosphorus heterocycles by way of a [1,5]- or [1,3]-sigmatropic shift, respectively, followed by a H-shift. Strain underlies both rearrangements, which causes these remarkably selective conversions that can be tuned by changing the substituents.     

Free-radical pathways in the decomposition of ketones over polycrystalline TiO(2): the role of organoperoxy radicals.

The oxidative decomposition of various ketones (including acetone, 2-butanone, 4-heptanone, cyclopentanone and cyclohexanone) over dehydrated TiO(2) (P25) powder is investigated by electron paramagnetic resonance (EPR) spectroscopy. For the first time, a series of thermally unstable radical intermediates are observed both on the activated and reduced TiO(2) surface, depending on the adopted experimental conditions. These radical intermediates are identified as organoperoxy-based species of general formula ROO(.-) and RCO(3) (.-). They are formed by reaction of photogenerated charge carriers (either trapped electrons or trapped holes) with the adsorbed ketones in the presence of molecular oxygen. The organoperoxy intermediates are thermally unstable and decompose at temperatures in the region of 180-250 K. This work demonstrates that free-radical pathways involving both organoperoxy and superoxide radicals can be responsible for the thermal- and photodecomposition of ketones over polycrystalline TiO(2) (P25).     

Si4+Si3反应动力学：振动激发态对反应的影响

用准经典轨线方法研究了处于振动激发态的硅原子团簇与硅原子团簇碰撞的反应动力学，计算表明，对于Ｓｉ４＋Ｓｉ３反应，当反应物团簇处于振动激发态时，有利于生成更小团簇的碎片，而对生成Ｓｉ６＋Ｓｉ及Ｓｉ５＋Ｓｉ２的影响不大。     

控制异丁烯阳离子聚合终止方式的新方法—活性中心转化法

控制异丁烯阳离子聚合终止方式的新方法──活性中心转化法曹宪一，王强，武冠英（北京化工大学高分子材料研究所，北京，１０００２９）关键词异丁烯，阳离子聚合，活性中心转化自八十年代中期Ｈｉｇａｓｈｉｍｕｒａ及Ｋｅｎｎｅｄｙ等人陆续发现乙烯基醚类单体及异丁烯...     

Polystyrene prepared by reactive extrusion: kinetics and effect of processing parameters

The conversion and residence time were investigated during the bulk polymerization of styrene in a twin screw extruder. It was found that polymerization mainly occurred in the zone between 400 and 1000 mm along the screw axis in the extruder, corresponding to the residence time of the reactants ranging from 1 to 4 min in the extruder. Furthermore, the processing conditions (feed rate, screw rotation rate) and average molecular weight of the polymer have a great effect on the residence time. Based on dimensionless analysis, a model of the residence time has been built‐up, which has been confirmed by the results of realistic measurements. A kinetic model of the polymerization has also been established under the assumption that the screw extruder can be regarded as an ideal plug flow reactor. Copyright © 2004 John Wiley & Sons, Ltd.     

HIPS／PP熔融反应共混及其动态力学性质

研究了高抗冲聚苯乙烯（HIPS）／聚丙烯（PP）共混物在过氧化二异丙苯（DCP）存在下的熔融反应过程及其动态力学性质．HIPS在DCP存在下以聚苯乙烯（PS）的降解为主，伴随着聚丁二烯（PB）的交联和接枝，PP在DCP存在下以降解为主，HIPS／PP在DCP存在下以PP同HIPS的反应接枝为主，这种原位生成的增容剂显著地改善了HIPS／PP两组份间的相容性，其分子运动特征较前两者发生明显变化，PS的Tg下降，PB和PP的Tg升高．     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.