Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

Atom transfer radical polymerization directly from poly(vinylidene fluoride): Surface and antifouling properties

The direct preparation of grafting polymer brushes from commercial poly (vinylidene fluoride) (PVDF) films with surface‐initiated atom transfer radical polymerization (ATRP) is demonstrated. The direct initiation of the secondary fluorinated site of PVDF facilitated grafting of the hydrophilic monomers from the PVDF surface. Homopolymer brushes of 2‐(N,N‐dimethylamino)ethyl methacrylate (DMAEMA) and poly (ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the PVDF surface. The chemical composition and surface topography of the graft‐functionalized PVDF surfaces were characterized by X‐ray photoelectron spectroscopy, attenuated total reflectance/Fourier transform infrared spectroscopy, and atomic force microscopy. A kinetic study revealed a linear increase in the graft concentration of poly[2‐(N,N‐dimethylamino)ethyl methacrylate] (PDMAEMA) and poly[poly(ethylene glycol) monomethacrylate] (PPEGMA) with the reaction time, indicating that the chain growth from the surface was consistent with a controlled or living process. The living chain ends were used as macroinitiators for the synthesis of diblock copolymer brushes. The water contact angles on PVDF films were reduced by the surface grafting of DMAEMA and PEGMA. Protein adsorption experiments revealed a substantial antifouling property of PPEGMA‐grafted PVDF films and PDMAEMA‐grafted PVDF films in comparison with the pristine PVDF surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3434–3443, 2006     

Evaluation of piezoelectric PVDF polymers for use in space environments. III. Comparison of the effects of vacuum UV and gamma radiation

Films of piezoelectric PVDF and P(VDF‐TrFE) were exposed to vacuum UV (115–300 nm VUV) and γ‐radiation to investigate how these two forms of radiation affect the chemical, morphological, and piezoelectric properties of the polymers. The extent of crosslinking was almost identical in both polymers after γ‐irradiation, but surprisingly, was significantly higher for the TrFE copolymer after VUV‐irradiation. Changes in the melting behavior were also more significant in the TrFE copolymer after VUV‐irradiation due to both surface and bulk crosslinking, compared with only surface crosslinking for the PVDF films. The piezoelectric properties (measured using d₃₃ piezoelectric coefficients and D‐E hysteresis loops) were unchanged in the PVDF homopolymer, while the TrFE copolymer exhibited more narrow D‐E loops after exposure to either γ‐ or VUV‐radiation. The more severe damage to the TrFE copolymer in comparison with the PVDF homopolymer after VUV‐irradiation is explained by different energy deposition characteristics. The short wavelength, highly energetic photons are undoubtedly absorbed in the surface layers of both polymers, and we propose that while the longer wavelength components of the VUV‐radiation are absorbed by the bulk of the TrFE copolymer causing crosslinking, they are transmitted harmlessly in the PVDF homopolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3253–3264, 2006     

Photon interaction studies using 241Am γ-rays

We have carried out some photon interaction measurements using 59.54 keV γ-rays from a ²⁴¹Am source. These include γ attenuation studies as well as photoelectric absorption studies in various samples. The attenuation studies have been made using leaf and wood samples, samples like sand, sugar etc., which contain particles of varying sizes as well as pellets and aqueous solutions of rare earth compounds. In the case of the leaf and wood samples, we have used the γ-ray attenuation technique for the determination of the water content in fresh and dried samples. The variation of the attenuation coefficient with particle size has been investigated for sand and sugar samples. The attenuation studies as well as the photoelectric studies in the case of rare earth elements have been carried out on samples containing such elements whose K-absorption edge energies lie below and close to the γ-energy used. Suitable compounds of the rare earth elements have been chosen as mixture absorbers in these investigations. A narrow beam good geometry set-up was used for the attenuation measurements. A well-shielded scattering geometry was used for the photoelectric measurements. The mixture rule was invoked to extract the values of the mass attenuation coefficients for the elements from those of the corresponding compounds. The results are consistent with theoretical values derived from the XCOM package.     

800nm激光泵浦掺Nd^3＋的氟化物玻璃光纤正向双程超荧光分析

从实验上探讨了掺Ｎｄ＾３＋的氟化物玻璃光纤正向双程超荧光基本特性，包括输入－输出特性、输出－带宽特性以及输出－波长（激发）特性。并给出了理论上的拟合公式，实验表明利用氟化物玻璃光纤有望获得性能优异的有应用前景的低相干度集成化光源。     

Synthesis,characterization, spectroscopy and thermal analysis of rare earth picrate complexes with <Emphasis Type="Italic">L</Emphasis>-lysine

Summary Rare earth picrate (RE) complexes with L-lysine (Lys) were synthesized and characterized. Elemental analysis (CHN), EDTA titrations and thermogravimetry data suggest a general formula RE(pic)₃·2Lys·2H₂O, where RE=La-Lu (without Pm) and Y, pic=picrate). IR spectra suggest that Lys is coordinated to the central ion through the nitrogen of the α-amino group. Parameters obtained from the absorption spectrum of the Nd compound indicated that the metal-ligand bonds are essentially electrostatic. Emission spectrum and biexponential behavior of the luminescence decay of the Eu compound suggest the existence of polymeric species. Thermogravimetric/derivative thermogravimetric (TG/DTG) and differential scanning calorimetry (DSC) curves of all complexes are very similar, with five events. The final products are the corresponding rare earth oxides and their X-ray diffraction patterns are identical to the calcinated oxides.</o:p>     

纳米二氧化钛粒子分散性能的研究

以四氯化钛为原料，采用溶胶-凝胶法技术合成路线，获得了平均粒径为63nm的二氧化钛粉末。采用分散技术，不仅可以改善粒子的分散性能，而且对粒子的生长也起到一定的抑制作用。研究表明：(1)采用SDS作为分散剂时，其极性基团和非极性基团分别与水和纳米TiO2粒子相结合，从而阻隔了TiO2粒子的团聚，起到分散作用。(2)以稀土元素La作为分散剂，其独特的轨道结构，不仅扩大了能量吸收的范围，更重要的是它与TiO2形成的络合物，使其成为相对独立的小团体，而它本身很小的固溶度使其难于形成合金化组元，结果被释放出来，从而形成更小的纳米TiO2粒子，起到分散纳米TiO2粒子的作用，并同时抑制纳米TiO2粒子的生长。     

乙酰丙酮稀土四苯基卟啉配合物的电化学研究

本文指出我国环境保护产业发展中存在的问题，论述了“入关“对我国环境保护产业的影响及应采取的经济和税收政策。     

丙氨酸稀土二元和三元配合物的pH电位法研究

本文报道在生理条件下(37℃,I=150 mmol/L NaCl)用pH电位法研究Ala-Ln、GIu—Ln及Ala-Glu-Ln中(Ala=L-丙氨酸,Glu=L-谷氨酸,Ln=Ce,Pr,Nd,Y)二元及三元配合物的稳定常数,运用MINIQUAD-82A程序确定粒子组成,并由COMPLEX程序获得配位粒子分布图,结果表明,三价稀土离子形成配合物的稳定顺序为:Ce相似文献   

稀土富勒烯生成的影响因素初探

采用某些特殊的放电和提取方法，如反向放电和甲苯高温高压提取等可以有效地提高稀土富勒烯的生成效率［‘，‘’，并已先后成功高效地合成了许多含稀土富勒烯「‘’．对其提纯、表征、衍生和应用也进行了研究［‘－’j．但对影响稀土富勒烯生成的因素研究较少．在石墨律中同时填入La，Y，Sc的稀土氧化物，对其稀土富勒烯生成效率的情况进行了研究，认为稀土元素的第一电离能是影响稀土富勒烯生成的主要因素‘’，’‘．Moro等采用激光和热解吸质谱对稀土富勒烯的研究结果表明，稀土元素的氧化态是影响稀土富勒烯生成的决定性因素”’．本…