同系物季铵盐离子液体阳离子的离子交换色谱法分析

建立了离子交换色谱-直接电导检测法分离测定3种同系物季铵盐离子液体阳离子(四甲基铵、四乙基铵和四丙基铵阳离子)的方法。采用磺酸型阳离子交换色谱柱,以乙二胺-柠檬酸-乙腈为淋洗液,考察了淋洗液种类、浓度及色谱柱温度对3种阳离子保留的影响。并根据测定对象不同,调整乙二胺浓度及乙腈含量以改善分离效果。淋洗液中增加乙腈含量,可明显缩短四丙基铵阳离子的保留时间,并改善其色谱峰形。季铵阳离子同系物的保留符合碳数规律。优化的色谱条件为:流速1.0 mL/min,色谱柱温度40℃;以0.02 mmol/L乙二胺-0.12 mmol/L柠檬酸(pH 4.0)为淋洗液分离测定四甲基铵;以0.2 mmol/L乙二胺-0.4 mmol/L柠檬酸-1%乙腈(pH 4.0)为淋洗液分离测定四乙基铵和四丙基铵。所测阳离子的检出限(S/N=3)分别为0.015,0.22,1.88 mg/L,相对标准偏差(n=5)均小于2.3%。将方法应用于表面活性剂和实验室合成的离子液体的分析,加标回收率为99%~104%。本方法简单、准确、可靠,具有良好的实用性。     

A Conjugate Addition Approach to Diazo-Containing Scaffolds with β Quaternary Centers

Structurally complex diazo-containing scaffolds are formed by conjugate addition to vinyl diazonium salts. The electrophile, a little studied α-diazonium-α,β-unsaturated carbonyl compound, is formed at low temperature under mild conditions by treating β-hydroxy-α-diazo carbonyls with Sc(OTf)₃. Conjugate addition occurs selectively at the 3-position of indole to give α-diazo-β-indole carbonyls, and enoxy silanes react to give 2-diazo-1,4-dicarbonyl products. These reactions result in the formation of tertiary and quaternary centers, and give products that would be otherwise difficult to form. Importantly, the diazo functional group is retained within the molecule for future manipulation. Treating an α-diazo ester indole addition product with Rh₂(OAc)₄ caused a rearrangement to occur to give a 2-(1H-indol-3-yl)-2-enoate. In the case of diazo ketone compounds, this shift occurred spontaneously on prolonged exposure to the Lewis acidic reaction conditions.     

镉汞四元硒化物K8Cd2.79Hg9.21Se16和Rb4Hg3.04Cd2.96Se8的溶剂热合成及表征

利用溶剂热法合成了2种含镉汞的二维(2D)四元硒化物K8Cd2.79Hg9.21Se16(1)和Rb4Hg3.04Cd2.96Se8 (2)。单晶X射线衍射分析表明,化合物1为正交晶系,空间群为Pbcn,a=1.082 71(17) nm,b=0.678 73(10) nm,c=1.415 0(2) nm,Z=1;化合物2为正交晶系,空间群为Ibam,a=0.640 72(10) nm,b=1.160 25(16) nm,c=1.452 0(2) nm,Z=2。化合物1中含有八元环Cd2Hg2Se4和六元环CdHg2Se3阴离子层(Cd2.79Hg9.21Se16)n8n-;化合物2中含有八元环Cd2(Cd/Hg)2Se4及四元环CdHgSe2和(Cd/Hg)2Se2阴离子层(Hg3.04Cd2.96Se8)n4n-。对这2种化合物进行了扫描电镜和能谱分析、粉末X射线衍射、差示扫描量热分析、固体-可见漫反射光谱和荧光性质等表征。     

Enantioselective Catalytic Aldehyde α‐Alkylation/Semipinacol Rearrangement: Construction of α‐Quaternary‐δ‐Carbonyl Cycloketones and Total Synthesis of (+)‐Cerapicol

An enantioselective aldehyde α‐alkylation/semipinacol rearrangement was achieved through organo‐SOMO catalysis. The catalytically generated enamine radical cation serves as a carbon radical electrophile that can stereoselectively add to the alkene of an allylic alcohol and initiate ensuing ring‐expansion of cyclopropanol or cyclobutanol. This tandem reaction enables the production of a wide range of nonracemic functionalizable α‐quaternary‐δ‐carbonyl cycloketones in high yields and excellent enantioselectivity from simple aldehydes and allylic alcohols. As a key step, the intramolecular reaction was also successfully applied in the asymmetric total synthesis of (+)‐cerapicol.     

Cu‐Catalyzed Diastereo‐ and Enantioselective Reactions of γ,γ‐Disubstituted Allyldiboron Compounds with Ketones

A catalytic diastereo‐ and enantioselective method for the preparation of complex tertiary homoallylic alcohols containing a vicinal quaternary carbon stereogenic center and a versatile alkenylboronic ester is disclosed. Transformations are promoted by 5 mol % of a readily available copper catalyst bearing a bulky monodentate phosphoramidite ligand, which is essential for attaining both high dr and er. Reactions proceed with a wide variety of ketones and allylic 1,1‐diboronate reagents, which enables the efficient preparation of diverse array of molecular scaffolds.     

Mechanical properties of anion exchange membranes by combination of tensile stress–strain tests and dynamic mechanical analysis

The thermomechanical properties of anion exchange polymers based on polysulfone (PSU) quaternized with trimethylamine (TMA) or 1,4‐diazabicyclo[2.2.2]octane (DABCO) and containing hydroxide or chloride anions by tensile stress–strain tests and dynamic mechanical analysis (DMA) have been determined. The reported mechanical properties included the Young's modulus, tensile strength, and elongation at break from tensile tests and the storage and loss modulus and glass transition temperature from DMA. The anion exchange membranes behaved as stiff polymers with Young's modulus in the order of 1 GPa, relatively with high strength (about 30 MPa) and low elongation at break (around 10%) was observed. Tensile tests were also made with membranes exchanged with hydrogen‐carbonate and carbonate anions to control the absence of important carbonation of the OH form. The glass transition temperatures were of the order of 150 °C (PSU‐TMA) or 200 °C (PSU‐DABCO) for the hydroxide form, confirmed by differential scanning calorimetry; they increase further by about 50 K, when hydroxide ions are replaced by chloride. This result and the increase of the storage modulus could be interpreted by the higher hydration of hydroxide ions and the plasticizing effect of water, which reduced the Van der Waals interactions between the macromolecular chains. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1180–1187     

Terahertz optical asymmetric demultiplexer based tree-net architecture for all-optical conversion scheme from binary to its other 2n radix based form

To exploit the parallelism of optics in data processing,a suitable number system and an efficient encoding/decoding scheme for handling the data are very essential.In the field of optical computing and parallel information processing,several number systems like binary,quaternary,octal,hexadecimal,etc.have been used for different arithmetic and algebraic operations.Here,we have proposed an all-optical conversion scheme from its binary to its other 2n radix based form with the help of terahertz optical asymmetric demultiplexer (TOAD) based tree-net architecture.