Quantitative Detection for Porphyromonas gingivalis in Tooth Pocket and Saliva by Portable Electrochemical DNA Sensor Linked with PCR

Here, a quantitative electrochemical analysis of periodontal bacteria in gingival crevicular fluid (GCF) and saliva by direct polymerase chain reaction (PCR) is presented. The electrochemical measurement was performed by mixing with PCR products and electrochemical indicator (bisbenzimidazole trihydrochloride). The peak current of indicator is reduced due to slower diffusion when the dye intercalates into the amplified DNA, and the degree of reduction in the peak current is correlates with the quantity of amplified DNA. Therefore, a quantitative analysis is possible by using our electrochemical method at the end point of PCR. In the GCF testing, The number of Porphyromonas gingivalis (Pg) detected by our electrochemical method at the end point of PCR were almost same compared with that were calculated by the conventional method of quantitative real? time PCR. In the saliva testing, the relationship between number of Pg in saliva and average pocket depth, and age‐dependence were also clearly observed. Since the saliva sample is obtained in a non‐invasive manner, this method is useful for the primary screening of periodontal disease. Moreover, our detection method is simple and uses a hand‐held potentiostat making it suitable for development of an on‐site periodontal diagnosis system.     

Stripping Analysis of As(III) by Means of Screen‐Printed Electrodes Modified with Gold Nanoparticles and Carbon Black Nanocomposite

A novel sensor based on carbon black‐gold nanoparticle nanocomposite modified screen‐printed electrode (CB‐AuNPs/SPE) for the detection of As(III) has been developed. The sensor was prepared modifying the SPE with CB and AuNPs by a drop casting automatable deposition. The As(III) was detected by CB‐AuNPs/SPE using anodic stripping voltammetry, with a high sensitivity (673±6 µA µM^?1 cm^?2) and reaching a LOD of 0.4 ppb. Finally, CB‐AuNPs/SPE has been applied to As(III) trace analysis in drinking water, obtaining satisfactory recovery values (99±9 %).     

Electrochemical Determination of Dextromethorphan on Reduced Graphene Oxide Modified Screen‐Printed Electrode after Electromembrane Extraction

In this paper, electromembrane extraction coupled with differential pulse voltammetry (DPV) on a reduced graphene oxide modified screen‐printed carbon electrode (RGO‐SPCE) for the determination of dextromethorphan (DXM) in urine and plasma has been described. DXM migrated from 4 mL of a donor phase across a thin layer of 2‐nitrophenyl octyl ether (NPOE) immobilized in the pores of a porous hollow fiber, into a 20 µL acceptor phase (HCl) present inside the lumen of the fiber. Then, 15 µL of a 0.1 M NaOH solution was added to the acceptor phase and the mixture was analyzed using DPV.     

Voltammetric Determination of Pb(II) and Cd(II) Ions in Well Water Using a Sputtered Bismuth Screen‐Printed Electrode

A method using commercially available sputtered bismuth screen‐printed electrodes (Bi_spSPE), as substitute to mercury electrodes, for the determination of trace Pb(II) and Cd(II) ions in drinking well water samples collected in a contaminated area in The Republic of El Salvador by means of differential pulse anodic stripping voltammetry (DPASV) has been proposed. The comparable detection and quantification limits obtained for both Bi_spSPE and hanging mercury drop electrode (HMDE), together with the similar results with a high reproducibility obtained in these water samples analyses recommend the applicability of Bi_spSPE for the determination of low level of metal concentrations in natural samples.     

Dimensional considerations on the mechanical properties of 3D printed polymer parts

Additive manufacturing offers a useful and accessible tool for prototyping and manufacturing small volume functional parts. Polylactic acid (PLA) and thermoplastic polyurethane (TPU) are amongst the most commonly used materials. Characterising 3D printed PLA and TPU is potentially important for both designing and finite element modelling of functional parts. This work explores the mechanical properties of additively manufactured PLA/TPU specimens with consideration to design parameters including size, and infill percentage. PLA/TPU specimens are 3D-printed in selected ISO standard geometries with 20%, 60%, 100% infill percentage. Tensile and compression test results suggest that traditional ISO testing standards might be insufficient in characterising 3D printed materials for finite element modelling or application purposes. Infill percentage in combination to design size, may significantly affect the mechanical performance of 3D printed parts. Dimensional variation may cause inhomogeneity in mechanical properties between large and small cross section areas of the same part. The effect was reduced in small cross section parts where reducing the nominal infill had less effect on the resulting specimens. The results suggest that for 3D printed functional parts with significant dimensional differences between sections, the material properties are not necessarily homogeneous. This consideration may be significant for designers using 3D printing for applications, which include mechanical loading.     

Sensitive Quantification of Fe(III) in Food Samples at Screen Printed Carbon Electrode Modified with Graphene and Piroxicam by Catalytic Adsorptive Voltammetry

A new disposable sensitive voltammetric sensor for the determination of Fe(III) based on a graphene (G) and piroxicam (Pir) modified screen printed carbon electrode (Pir/G/SPCE) has been developed. The developed method is based on accumulation of Fe(III) on the surface of the prepared sensor strip, formation a complex with Pir and subsequent reduction the adsorbed chelated Fe(III) at ?0.03 V (vs. Ag/AgCl) coupled with the catalytic enhancement of bromate. Characterizations of the modified electrode surface were performed by field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray spectroscopy (EDX) and electrochemical impedance spectroscopy (EIS). Electrochemical behavior of the modified SPCEs was investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Under the optimum conditions, the catalytic voltammetric method exhibited linear calibration plot in the concentration ranges of 1–100 ng mL^?1 and 100–3500 ng mL^?1 Fe(III) with a limit of detection of 0.3 ng mL^?1. The sensor strip displayed good reproducibility with 1.7 % relative standard deviation (RSD%). The developed method was successfully applied for the determination of iron in food samples such as vegetables, fruit, and cereal.     

Markierung von Humanserumalbumin mit 131J durch elektrochemische Oxydation von Jodid zum Jod

Es wird über eine Methode und deren optimale Bedingungen berichtet, die eine schnelle, schonende und fernbediente Markierung von Humanserumalbumin mit ¹³¹ J gestattet. Die Markierungsausbeuten, bezogen auf das eingesetzte Jod, sind gut reproduzierbar und liegen bei über 90%.     

Evaluation of the piezoelectric behaviour produced by a thick-film transducer using digital speckle pattern interferometry

This paper presents an interferometric measurement of the out-of-plane deflections produced by a piezoelectric transducer, manufactured by thick-film deposition of a ceramic paste over an alumina substrate, when is subjected to a DC electric voltage. It is shown that a digital speckle pattern interferometer with an incorporated phase-shifting facility allows the measurement of nanometer displacements generated by the piezoelectric device. These measurements are used to evaluate the effective piezoelectric charge constant along the polarization direction (d₃₃)_eff that characterizes the thick-film transducer.     

Construction of Certain Cyclic Distance-Preserving Codes Having Linear-Algebraic Characteristics

An ordered list of binary words of length n is called a distance-preserving m, n-code, if the list distance between two words is equal to their Hamming distance, for distances up to m. A technique for constructing cyclic m, n-codes is presented, based on the standard Gray code and on some simple tools from linear algebra.     

RL-C并联谐振态量与Q的几个关系式

对ＲＬ－Ｃ并联谐振电路中的几个谐振态量与Ｑ之间的关系作了详尽的推导。