XANES技术探究酸处理对义马煤中硫形态及其热变迁行为的影响

利用XANES技术研究了酸处理对义马煤的比表面积、体相及表面硫形态分布和热解过程中硫变迁行为的影响。结果表明,由于酸处理过程中部分镶嵌于有机质中的矿物质被脱除导致部分闭合孔打开,煤的比表面积有所增大。HCl-HF和HCl-HF-HNO_3处理脱除了煤中大部分矿物质和无机硫,由于HNO_3的强氧化性,YMN中亚砜和砜硫化物的相对含量均高于YMR和YMD。相比煤样体相,酸处理过程对表面形态硫的分布产生了更为明显的影响。酸处理煤样热解含硫气体释放量减少,但由于大部分碱性矿物质的脱除和煤中易分解形态硫相对含量的增加,含硫气体释放率增加。不同形态硫之间的内部转化使得酸处理煤焦中主要形态硫的分布更为均匀。通过HCl-HF-HNO_3处理可以有效地脱除煤中矿物质及无机硫,并改变煤中形态硫分布,从而为高灰分、富含黄铁矿的高硫煤的利用提供指导。     

金属-有机骨架衍生催化剂在二氧化碳加氢和费托合成反应中的应用

CO₂加氢和费托合成反应是C1化学中重要的研究领域,CO₂加氢制备高附加值化学品和燃料有助于降低大气中CO₂浓度,减轻化石燃料消耗的压力;费托合成反应是以非石油资源为原料生产液体燃料和化学品的重要路径。 开发新型、高效、稳定的催化剂是CO₂加氢和费托合成反应的关键点之一。 利用金属-有机骨架(Metal-Organic Frameworks,MOFs)材料的特点制备的MOFs衍生催化剂在CO₂加氢和费托合成反应中具有较好的应用前景。 本文综述了CO₂加氢和费托合成反应中MOFs衍生催化剂的制备方法,以及催化剂在各反应中的催化性能,并对目前所存在的问题以及今后的发展进行了总结和展望。     

热裂解气相色谱质谱法分析聚合物中红磷

采用单击热裂解(PY)模式和逸出气体分析(EGA)程序升温两种热裂解模式对红磷样品进行定性分析,利用气相色谱分离技术对红磷进行分离,根据红磷的特征质谱31,62,93,124及特征丰度比,质谱法分析不同材料中的红磷含量。单击热裂解模式下,材质和添加剂有可能对红磷造成干扰,改进后的EGA热裂解模式能排除红磷检测中材质和添加剂的干扰,并采用改进后的EGA裂解程序测定自制阳性样品中红磷的含量。结果表明:通过优化裂解温度和气相色谱条件可以有效改善红磷的分析结果,红磷质量浓度在100~500 mg/kg范围内具有良好线性,加标回收率在90.7%~97.7%,相对标准偏差(RSD)为1.6%~2.3%,定量限为81.27 mg/kg。     

不同烟草生物质热解释放致香物质的研究

采用烟叶和烟梗为原料,使用热裂解气相色谱法对烟草的燃烧时间、燃烧温度进行控制,精确模拟实际烟草致香物质释放环境,精确捕获、并半定量物质,从而在实验室模拟、分析、研究烟草燃烧物中致香物质的组成和特点。研究分别考察了两种生物质在500℃、550℃下释放的致香物质组成。结果表明,烟梗、烟叶中元素组成中硫、氮两种元素含量低,而C/H比值两种烟草生物质均较高。两个热解温度下烟叶的热解产物中致香物质的含量均明显高于烟梗。升高热解温度均有利于获得更高相对含量的热解成分。烟叶热解产物中烯烃类物质相对含量比烟梗中多,而烟梗热解产物中酚类物质含量比烟叶中多。提高热解温度有利于酮类致香物质含量产生。     

About graphene ribbons development in laser synthesized nanocarbon

The work presents preliminary studies with the goal to extend the share of long graphene ribbons in laser-synthesized carbon black. Investigations revealed the existence, as a major constituent, of graphene ribbons composed of up to 10-15 graphene layers, spaced at ∼0.35-0.37 nm and of tens of nanometres in length. The samples used to study the development of this specific structure were obtained from sensitized acetylene-based mixtures and the experiments were performed following the variation of both the experimental parameters and gas composition.     

Modulating the Acidic and Basic Site Concentration of Metal-Organic Framework Derivatives to Promote the Carbon Dioxide Epoxidation Reaction

Metal-organic framework (MOF) is an ideal precursor/template for porous carbon, and its active components are uniformly doped, which can be used in energy storage and catalytic conversion fields. Metal-organic framework PCN-224 with carboxylporphyrin as the ligand was synthesized, and then Zn²⁺ and Co²⁺ ions were coordinated in the center of the porphyrin ring by post-modification. Here, PCN-224−ZnCo with different ratios of bimetallic Zn²⁺/Co²⁺ ions were used as the precursor, and the metal-nitrogen-carbon(M−N−C) material of PCN-224−ZnCo-950 was obtained by pyrolyzing the precursor at 950 °C in Ar. Because Zn is easy to volatilize at 950 °C, the formed M−N−C materials can reflect different Co contents and different basic site concentrations. The formed material still maintains the original basic framework. With the increase of Zn²⁺/Co²⁺ ratio in precursor, the concentration of N-containing alkaline sites in pyrolysis products gradually increase. Compared with the precursor, PCN-224−ZnCo₁-950 with Zn²⁺/Co²⁺=1 : 1 has greatly improved basicity and suitable acidic/ alkaline site concentration. It can be efficiently used to carbon dioxide absorption and catalyze the cycloaddition of CO₂ with epoxide. More importantly, the current method of adjusting the acidic/basic sites in M−N−C materials through volatilization of volatile metals can provide an effective strategy for adjusting the catalysis of MOF derivatives with porphyrin structure.     

The effect of process variables on the characteristics of carbon nanotubes obtained by spray pyrolysis

A simple spray pyrolysis setup is used to grow multi-walled carbon nanotubes (MWCNTs), from a ferrocene solution in benzene as precursor. The effects of process variables such as growth temperature, position of the aerosol generator and position in the reactor where the sample was formed were investigated. These variables have a strong influence on the graphitization degree, homogeneity, diameter and alignment of the nanotubes, as observed by TEM, SEM, XRD and Raman spectroscopy. Vertically aligned MWCNT arrays with high density were obtained in large areas (10 × 10 mm²), with high yield (2.1 mg cm⁻²) and at a growth rate at 1.43 μm min⁻¹, by a suitable choice of the experimental conditions.     

Silver-doped calcium phosphate nanopowders prepared by electrostatic spraying

Silver-doped calcium phosphate nanopowders were successfully prepared by the cost-effective electrostatic spray-pyrolysis process. The properties of the silver-doped nanopowder annealed at 500°C for 30 min were investigated through X-ray diffraction analysis, field emission scanning electron microscope, and Fourier transform infrared spectroscopy. The silver-doped nanopowders with 70–90 nm particle size showed an antibacterial performance against Escherichia coli.     

Homogeneous ZnO Nanoparticles by Flame Spray Pyrolysis

Zinc oxide (ZnO) nanoparticles were made by flame spray pyrolysis (FSP) of zinc acrylate–methanol–acetic acid solution. The effect of solution feed rate on particle specific surface area (SSA) and crystalline size was examined. The average primary particle diameter can be controlled from 10 to 20nm by the solution feed rate. All powders were crystalline zincite. The primary particle diameter observed by transmission electron microscopy (TEM) was in agreement with the equivalent average primary particle diameter calculated from the SSA as well as with the crystalline size calculated from the X-ray diffraction (XRD) patterns for all powders, indicating that the primary particles were rather uniform in diameter and single crystals. Increasing the solution feed rate increases the flame height, and therefore coalescence and/or surface growth was enhanced, resulting in larger primary particles. Compared with ZnO nanoparticles made by other processes, the FSP-made powder exhibits some of the smallest and most homogeneous primary particles. Furthermore, the FSP-made powder has comparable BET equivalent primary particle diameter with but higher crystallinity than sol–gel derived ZnO powders.     

低加热速度下显微组分的热解机理

利用差热分析并采用微分和积分相结合的方法，通过分析显微组分富集样在低加热速度下热解的实验结果，对显微组分的热解机理进行了研究。结果表明，煤的热解过程十分复杂，整个热解过程不能用一步反应描述，但存在明确分界温度Ｔｍ。在假定两步反应的前提下研究表明，各步反应均由扩散过程控制，但扩散机理不同，不同段的活化能不一样，后段的活化能比前段小。不同显微组分的热解机理没有表现出差别，但活化能却有差别，惰质组一般具