采用新型分子表面印迹技术构建手性空穴实现对手性药物对映体的分子识别与高效拆分

通过偶联剂γ-氨丙基三甲氧基硅烷（AMPS）的媒介,通过表面引发接枝,将功能单体甲基丙烯酸（MAA）接枝聚合在微米级硅胶微粒表面,制得功能接枝微粒PMAA/SiO2;采用本课题组建立的新型分子表面印迹技术,以四咪唑（TM）为模型手性药物,用其左旋对映体L-TM为模板分子,乙二醇二缩水甘油醚（EGDE）为交联剂,对接枝在...     

Centrifugally-driven sample extraction, preconcentration and purification in microfluidic compact discs

Centrifugally-driven microfluidic compact discs (μ-CDs) have attracted significant interest within the analytical science community in the past decade, with the primary focus on the potential of such platforms for performing parallel and/or multiplex biological assays and further application in biomedical diagnostics. More recently, μ-CD-based devices were also applied to environmental analysis as platforms for multi-sample extraction and transportation, prior to off-disc analysis in the laboratory. This review critically summarizes recent developments in μ-CD platforms for sample extraction, preconcentration, fractionation and purification in bioanalytical and environmental applications. We also summarize the common methods employed in the fabrication of μ-CD platforms. Further, we discuss preparation of stationary phases in microfluidic channels embedded in μ-CDs, as applications of μ-CDs in sample extraction are generally based on enclosed series of extraction phases and microcolumns.     

PANI膜电聚合过程及电控分离苯酚的EQCM研究

通过电沉积方法在镀铂石英晶片上制备了导电聚苯胺(PANI)膜,采用电化学石英晶体微天平(EQCM)技术探讨了苯胺聚合机制及在苯酚溶液中的氧化还原特性.在0.5 mol/L硫酸溶液中结合循环伏安法考察了PANI膜在完全还原态(L)-半氧化态(E)-完全氧化态(P)之间的电活性和稳定性;在不同浓度的苯酚溶液中结合恒电压阶跃...     

Influence of one- and two-dimensional gel electrophoresis procedure on metal-protein bindings examined by electrospray ionization mass spectrometry, inductively coupled plasma mass spectrometry, and ultrafiltration

Three independent methods, (i) electrospray ionization mass spectrometry (ESI-MS), (ii) carrying out the complete protein preparation procedure required for protein gel electrophoresis (GE) including extraction, precipitation, washing, and desalting with subsequent microwave digestion of the produced protein fractions for metal content quantification, and (iii) ultrafiltration for separating protein-bound and unbound metal fractions, were employed to elucidate the influences of protein sample preparation and GE running conditions on metal-protein bindings. A treatment of the protein solution with acetone instead of trichloroacetic acid or ammonium sulfate for precipitate formation led to a strongly enhanced metal binding capacity. The desalting step of the resolubilized protein sample caused a metal loss between 10 and 35%. The omission of some extraction buffer additives led to a diminished metal binding capacity of protein fractions obtained from the sample preparation procedure for GE, whereas a tenside addition to the protein solution inhibited metal-protein bindings. The binding stoichiometry of Cu and Zn-protein complexes determined by ESI-MS was influenced by the type of the metal salt which was applied to the protein solution. A higher pH value of the sample solution promoted the metal ion complexation by the proteins. Ultrafiltration experiments revealed a higher Cu- and Zn-binding capacity of the model protein lysozyme in both resolubilization buffers for 1D- and 2D-GE compared to the protein extraction buffer. Strongly diminished metal binding capacities of lysozyme were recorded in the running buffer of 1D-GE and in the gel staining solutions.     

Analysis of primaquine and its metabolite carboxyprimaquine in biological samples: enantiomeric separation, method validation and quantification

The clinical formulation of primaquine (PQ) is a mixture of (−)‐(R)‐ and (+)‐(S)‐ primaquine enantiomers which may show different pharmacokinetic and pharmacodynamic properties. To assess the efficacy and toxicity of primaquine enantiomers, a method using LC‐MSD‐TOF has been developed. The enantiomers were well separated using a Chiralcel OD column (250 × 4.6 mm, 10 µm) with a linear gradient of mobile phase consisting of acetonitrile (0.1% formic acid) and aqueous ammonium formate (20 mm ; 0.1% formic acid) adjusted to pH 5.9 at a flow rate of 0.7 mL/min. The method was validated for linearity, precision, accuracy and limits of detection and quantification. The calibration curves were linear with all correlation coefficients being >0.999. The average recoveries of (−)‐(R)‐ and (+)‐(S)‐primaquine and (−)‐(R)‐ and (+)‐(S)‐carboxyprimaquine were 88 and 92%, respectively, in spiked human plasma and 89 and 93% respectively in spiked mouse plasma samples. The RSD of (−)‐(R)‐ and (+)‐(S)‐primaquine and (−)‐(R)‐ and (+)‐(S)‐carboxyprimaquine were 2.15, 1.74, 1.73 and 2.31, respectively, in spiked human plasma and 2.21, 1.09, 1.95 and 1.17% in spiked mouse plasma, respectively. The intra‐day and inter‐day precisions expressed as RSD were lower than 10% in all analyzed quality control levels. The method as reported is suitable for study of the pharmacokinetic and pharmacodynamic properties of the enantiomers of primaquine. The method was successfully applied to study plasma pharmacokinetic profile of enantiomers of primaquine and carboxyprimaquine in mice administered with primaquine in racemic form. The analytical method was found to be linear, accurate, precise and specific. Copyright © 2010 John Wiley & Sons, Ltd.     

Understanding the Anomalous Alkane Selectivity of ZIF-7 in the Separation of Light Alkane/Alkene Mixtures

C2 and C3 alkanes are selectively adsorbed from mixtures over the corresponding alkenes on the zeolite imidazolate framework ZIF-7 through a gate-opening mechanism. As a result, the direct production of the pure alkene upon adsorption and the pure alkane upon desorption in packed columns is possible. Herein, a detailed investigation of the step-wise adsorption and separation of alkanes and alkenes is presented, together with a rigorous performance assessment. A molecular picture of the gate-opening mechanism underlying the unprecedented selectivity towards alkane adsorption is proposed based on DFT calculations and a thermodynamic analysis of the adsorption-desorption isotherms.     

感应熔炼高锰硅的结构和形貌特性

采用场发射扫描电镜(FESEM)和X射线能谱仪(EDXS)对感应熔炼高锰硅(HMS)中的第二相条纹的形貌和成份进行了研究,发现第二相条纹平行贯穿整个高锰硅晶粒,其条纹宽度约30nm,间距在5-30μm内,成份为MnSi.通过高分辨透射电镜(HRTEM)观察到MnSi条纹为短程有序而长程无序的非晶形态.采用选区电子衍射(SAED)确定了高锰硅的晶体结构,结果表明所获得的高锰硅为单一的Mn4Si7相,未观察到高锰硅其它的非公度结构.透射电镜(TEM)结果表明,熔炼的高锰硅经过球磨和热压后产生了大量缺陷和应力畴,与热压之前的熔锭材料相比有明显差异.     

基于液滴微流控接口的高效液相色谱-毛细管电泳二维分离平台初探

蛋白质组体系的高度复杂性需要更高分辨率的多维分离技术。近年兴起的液滴技术在微纳尺度样品操控方面具有微体积、低扩散、无返混等独特优势,有望为多维分离平台的接口提供解决方案。通过采用不同结构的液滴微流控芯片可以实现“液滴生成”与“油相排除”功能,进行样品由连续流-非连续流-连续流的高效转移,将不同的分离模式进行二维耦联。本研究利用液滴作为接口技术耦联高效液相色谱与毛细管电泳构建二维分离系统,以蛋白质降解的复杂多肽混合物为样品,考察了液滴接口二维分离平台的可行性和有效性,并获得3000以上的峰容量,初步展示了该接口技术在多维分离分析领域的应用潜力。     

9-蒽醛衍生化-高效液相色谱法拆分α-氨基酸甲酯和几种脂肪胺对映体

采用高效液相色谱法,以9-蒽醛为衍生试剂,在5种多糖衍生物的手性固定相(CSPs)上对几种α-氨基酸甲酯对映体进行了手性分离。色谱条件如下: 流动相为含3%～10%(v/v)异丙醇的正己烷溶液,流速为1.0 mL/min,检测波长为254 nm。结果表明,α-氨基酸甲酯-9-蒽醛亚胺衍生物在Chiralcel OD柱或Chiralcel OD-H柱上的手性分离结果优于其他CSPs,而且在Chiralcel OD柱或Chiralcel OD-H柱上全部得到了基线拆分(α=1.24～5.47, Rs=2.56～13.90), L-对映体在这两种色谱柱上的保留强于D-对映体。同时还考察了几种脂肪胺在5种多糖衍生物手性固定相上的对映体拆分效果,结果表明脂肪胺的9-蒽醛亚胺衍生物在Chiralcel OD柱或Chiralcel OD-H柱上的分离效果良好。该法可用于其他α-氨基酸酯和胺类化合物对映体的分析。     

正相液相色谱-串联质谱法分离普萘洛尔对映体

建立正相液相色谱-串联质谱(LC-MS/MS)分离普萘洛尔对映体的方法,并用于盐酸普萘洛尔片对映体含量测定.样品使用甲醇进行简单提取,采用Chiralcel OD-H手性柱,以正己烷-乙醇-氨水(70∶30∶0.4, v/v/v)为流动相,流速为0.4 mL/min.在正离子模式下,通过电喷雾离子化(ESI+),采用多...