Platium Film Electrodes (1) Platium Film on Ti or TiO2-Covered Ti

A platium film was formed on a Ti(Pt-Ti) and on a TiO₂(Pt-TiO₂-Ti) substrate by the conventional electroplating method (ELP) and by the electroless plating technique (ELSP). The effective minimum film thickness was found to be 0.5 μm judging from the maximum electrocatalytic capablity in alkaline (1 M NaOH) water electrolysis. The film obtained from ELP is superior to that obtained from ELSP, being more tightly bound to the substrate, showing better coverage of the subsrate surface, and also being mechanically stronger. Comparisons with bright Pt and with Pt-black electrodes were made and it is concluded that the electrodes newly prepared using ELP will work as well as Pt-black electrods. The electrodes from ELSP are useful only as cathodes, and are not suitable as anodes.     

电化学在ICF靶制备中的新应用

报道了近年来在电解加工技术制备理论密度金属薄膜和电沉积技术制备金属纳米丝阵列材料等领域取得的进展。采用硫酸+甲醇电解液体系获得了表面粗糙度小于30nm的钛膜。采用阳极氧化铝模板电沉积技术制备出长度约10μm、直径约300nm的金纳米丝阵列。主要讨论了电解液配方及电解加工参数的选择,金属纳米丝直径与长度的控制等问题。     

孔雀石绿在自组装纳米银膜上的SERS

电解法制备了自组装纳米银膜。用紫外可见分光光度计和透射电镜对电解出的银胶进行了观测,并且用扫描电镜对制备好的银膜进行了表征,发现银膜上的纳米银颗粒是银胶中颗粒的二聚体和三聚体。我们得到了孔雀石绿的SERS谱,发现自组装纳米银膜对于用SERS检测孔雀石绿具有很好的增强效果,检测的下限是10-10M。另外,我们对所测不同浓度的孔雀石绿的指纹峰面积进行了分析,发现峰面积随浓度的变化有很好的线性关系,这对以后进行定量分析打下了基础。本实验说明用电解法制备的自组装纳米银膜对于检测孔雀石绿具有很好的应用前景。     

Wastes Treatment: Hydrothermal electrolytic oxidation of wastewater

Abstract

Electrochemical evolution of hydrogen gas, oxygen gas and chlorine at the electrodes is the usual reaction in conventional electrolysis of aqueous salt solution. However, here we demonstrate that the electrolysis governing reaction in hydrothermal solutions is different from the electrolysis performed at atmospheric pressure and temperatures up to 100°C. Experimental electrolytic reaction of aqueous salt solution carried out inside a sealed 300-mL batch autoclave showed that; accumulation of hydrogen gas, oxygen gas and chlorine is highly suppressed under hydrothermal (250°C and 7 MPa) conditions. We have also observed that, when organics are present in the aqueous salt solution being hydrothermally electrolyzed, an effective oxidation of organics is accomplished. Furthermore, for hydrothermal electrolytic oxidation (HEO) with oxygen gas added, experimentally observed TOC removal profile demonstrates apparent anodic oxidation electrical current efficiency of almost 200% for highconcentrated acetic acid solutions.     

氧分压对固体氧化物电解池性能的影响

High-temperature (700–900 ℃) steam electrolysis based on solid oxide electrolysis cells (SOECs) is valuable as an efficient and clean path for large-scale hydrogen production with nearly zero carbon emissions, compared with the traditional paths of steam methane reforming or coal gasification. The operation parameters, in particular the feeding gas composition and pressure, significantly affect the performance of the electrolysis cell. In this study, a computational fluid dynamics model of an SOEC is built to predict the electrochemical performance of the cell with different sweep gases on the oxygen electrode. Sweep gases with different oxygen partial pressures between 1.01 × 10³ and 1.0 × 10⁵ Pa are fed to the oxygen electrode of the cell, and the influence of the oxygen partial pressure on the chemical equilibrium and kinetic reactions of the SOECs is analyzed. It is shown that the rate of increase of the reversible potential is inversely proportional to the oxygen partial pressure. Regarding the overpotentials caused by the ohmic, activation, and concentration polarization, the results vary with the reversible potential. The Ohmic overpotential is constant under different operating conditions. The activation and concentration overpotentials at the hydrogen electrode are also steady over the entire oxygen partial pressure range. The oxygen partial pressure has the largest effect on the activation and concentration overpotentials on the oxygen electrode side, both of which decrease sharply with increasing oxygen partial pressure. Owing to the combined effects of the reversible potential and polarization overpotentials, the total electrolysis voltage is nonlinear. At low current density, the electrolysis cell shows better performance at low oxygen partial pressure, whereas the performance improves with increasing oxygen partial pressure at high current density. Thus, at low current density, the best sweep gas should be an oxygen-deficient gas such as nitrogen, CO₂, or steam. Steam is the most promising because it is easy to separate the steam from the by-product oxygen in the tail gas, provided that the oxygen electrode is humidity-tolerant. However, at high current density, it is best to use pure oxygen as the sweep gas to reduce the electric energy consumption in the steam electrolysis process. The effects of the oxygen partial pressure on the power density and coefficient of performance of the SOEC are also discussed. At low current density, the electrical power demand is constant, and the efficiency decreases with growing oxygen partial pressure, whereas at high current density, the electrical power demand drops, and the efficiency increases.     

Electrochemical Co-reduction of Bi(Ⅲ)and Y(Ⅲ)and Extracting Yttrium from Molten LiCl-KCl Using Liquid Bi as Cathode

The electrochemical reaction of Bi(Ⅲ)and co-reduction behaviour of Bi(Ⅲ)and Y(Ⅲ)ions were researched in molten LiCl-KCl on a ttmgsten(W)electrode employing a range of electrochemical teclmiques.Cyclic voltammetric and square-wave voltanunetric results revealed that the reduction of Bi(Ⅲ)was a one-step process,with the exchange of three electrons on a W electrode,and diffusion-controlled.The electrochemical curves showed two reduction peaks pertaining to the formation of Bi-Y alloy compounds,because of the co-reduction of Bi(Ⅲ)and Y(Ⅲ) by metallic Y deposited on the pre-deposited Bi-coated W electrode and reacting with Bi metal in molten LiCl-KCl. Furthermore,galvanostatic electrolysis was conducted using liquid Bi as cathode to extract yttrium at different current intensities,and the extractive products were analyzed by SEM,EDS and XRD.The results indicated that BiY intermetallic compotmd was formed in the molten LiCl-KCl-YCl3 system.     

电镀铜实验中镀层性质及其影响因素的探究*

电镀实验是电解原理应用的重要案例,通过实验不仅要获得定性的感性认知,还应该获得定量的理性数据。针对电镀铜实验,通过改变铜离子浓度、pH、电解时间、电解电压和电解温度等因素,探究其对镀层厚度、均匀性和致密性等性质的影响,在电解原理的基础上分析其形成机制,从而确定了电镀铜较适宜的操作条件,以此为学生开展电镀实验提供参考案例与研究思路。     

氧离子传导型固体氧化物电解池燃料电极的研究进展

固体氧化物电解池可高效地电解H₂O/CO₂制备燃料,越来越受到人们的重视. 本文对近年来在燃料电极（阴极）材料方面的研究进展进行了全面综述,指出各种阴极材料的优缺点及发展趋势,强调亟待解决的关键科学与技术问题.     

Electrolysis cells for laboratory organic synthesis

The importance of cell design to the development of convenient, laboratory organic electrosyntheses, popular with synthetic chemists, is highlighted. Although also influencing reaction selectivity, the cell design is the major factor determining the rate of conversion of reactant to product, the final conversion that can be achieved and the quantity of product formed. The recent literature contains a number of designs of flow electrolysis cells for electrosynthesis with examples of their application.     

Electrochemical and Scalable Dehydrogenative C(sp3)−H Amination via Remote Hydrogen Atom Transfer in Batch and Continuous Flow

A hydrogen atom transfer-directed electrochemical intramolecular C−H amination has been developed in which the N-radical species are generated at the anode, and the base required for the reaction is generated at the cathode. A broad range of valuable pyrrolidines were prepared in good yields and with high chemoselectivity. The reaction was easily scaled up in both batch and continuous flow systems.