Molar conductance of aqueous solutions of sodium, potassium, and nickel trifluoromethanesulfonate at 25‡C

The electrical conductivities of aqueous solutions of NaCF₃SO₃, KCF₃SO₃, and Ni(CF₃SO₃)₂ have been measured at 25‡C in the concentration range 1 to 25X 10^-3 mol-dm^-3 The data approach the Onsager limiting law at low concentrations, leading to a limiting molar ion conductivity for the CF₃SO ₃ ⁻ ion of 44.5±0.2 S-cm²-mol^-1, based on standard values for the cations. Using a simple size parameter for unsymmetrical polyatomic ions, based on the ion geometry, it is shown that the well known empirical relation between the molar conductivities of symmetrical ions and their radii can be extended to include certain polyatomic anions including CF₃SO ₃ ⁻ . The results suggest that the CF₃SO ₃ ⁻ ion is either a weak structure breaker in aqueous solution or neutral in this respect.     

Microfabricated ISEs: critical comparison of inherently conducting polymer and hydrogel based inner contacts

A rigorous side by side comparison of miniature planar potassium-selective electrodes with hydrogel and potassium hexacyanoferrate(II)/(III) doped polypyrrole (PPy/FeCN) based inner contacts is presented. The planar electrodes were manufactured by screen printing as four- and five-site arrays on ceramic substrates. These electrode arrays were incorporated into a flow-through cell, which could accommodate nine electrode sites. Two identical flow cells were connected in series and the effect of the inner contacts on the analytical performance of the respective electrodes has been critically evaluated. The time necessary to reach steady state conditions has been determined and the effect of experimental parameters (temperature, ambient light intensity, CO₂, and O₂ concentration of the sample) on the potential stability of the electrodes was analyzed. At controlled temperature, the drift of the planar potassium electrodes with hydrogel and PPy/FeCN solid contact were 0.11±0.02 mV h⁻¹ and 0.03±0.007 mV h⁻¹, respectively. The experimental data proved that there is no aqueous film formation between the PPy/FeCN film and the potassium-selective solvent polymeric membrane.     

固固相反应合成牛磺酸水杨醛钾与锑、铋的配合物

合成了牛磺酸水杨醛钾,并采用室温固固相反应法合成了牛磺酸水杨醛钾与三氯化锑和三氯化铋的配合物,其组成为:K2MC18H20O8N2S2 (M = Sb, Bi)。两种配合物的晶体结构均属于单斜晶系,锑配合物的晶胞参数为:a = 1.2869 nm, b = 1.7636 nm, c = 1.9917 nm, β= 93.79埃活榕浜衔锏木О问篴 = 1.4770 nm, b = 2.0334 nm, c = 2.0149 nm, β= 94.05。红外光谱表明N、Cl原子参与了配位,中心离子的配位数为5。     

Thermal stability and crystal structure of potassium fluoride monoperoxosolvate KF·H2O2

Potassium fluoride peroxosolvate KF-H₂O₂ was obtained upon action of a 30% aqueous solution of hydrogen peroxide on solid potassium fluoride dihydrate. As compared to other peroxosolvates, KF-H₂O₂ is characterized by the highest thermal stability: the decomposition rate constantk ₁, at 120°C is 1.4 10^–3 min^–1, the enthalpy of H₂O₂ addition to KF is 8.1 kcal/ mol. The correlation between the high stability of KF-H₂O₂ and the absence of catalytic properties of KF towards H₂O₂, and the formation of strong intermolecular O-H...F and intramolecular O-H...O hydrogen bonds in the crystal is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 38–44, January, 1993.     

Synthesis and X-ray structural analysis of a unique Co-crystallization complex of [NaSal]2DB24C8 and [KSal]2DB24C8

Sodium salicylate (NaSal where Sal=2-hydroxybenzoate), when mixed with dibenzo-24-crown-8 (DB24C8) yields a bimetallic complex [NaSal]₂DB24C8 in most polar organic media, while potassium salicylate (KSal) under similar conditions shows a tendency to yield 11 or 21 complexes depending upon medium or synthesis. However, the presence of both NaSal and KSal together results in a unique mixed cation complex of composition NaKSal₂DB24C8. This product melts sharply (190-92°C) without decomposition, displays IR spectral characteristics comparable to those of [Na(Sal)]₂DB24C8, and is stable in aqueous media as shown by the detectable cation effect on the UV absorption bands of Sal and DB24C8. Single crystal X-ray analysis of NaK(Sal)₂DB24C8 reveals that the system represents a co-crystallization complex of individual (KSal)₂DB24C8 and (NaSal)₂DB24C8 molecules. The crystals are monoclinic,P2₁/c,a=19.976(2) Å,b=9.031(1) Å,c=25.541(5) Å,=122.065(9)°, ų,T=298 K,Z=2+2, CuK =1.5418 Å, and 2 (2.5°–100°). FinalR factor for the 3012 observed reflections (F>3) is 0.092. Both the Na₂- and K₂-molecules possess crystallographic centers of symmetry with one metal and its associated anion on each side of the crown ring. However, the conformations of the crowns are very different in the two molecules, with the K₂-crown being nearly planar and the Na₂-crown being quite puckered. Four oxygen atoms from the DB24C8 (KO, 2.680–2.908 Å) and three carboxyl oxygen atoms (KO, 2.472–2.708 Å) from separate salicylate ions coordinate with each potassium. Three oxygens from the crown (NaO, 2.536–2.65 Å) and three carboxyl oxygens (NaO, 2.31–2.563 Å) coordinate with each sodium. The salicylate ions lie on opposite sides and nearly perpendicular (77.2°, Na₂-molecule; 82.7° K₂-molecule) to each crown but coordinate to both of the metal ions within a molecule. The K⁺K⁺ and Na⁺Na⁺ distances in the respective molecules are 3.95 and 3.34 Å. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82044 (18 pages).     

碘酸钾存在下极谱催化波法测定陈皮甙

基于陈皮甙在ＫＩＯ３存在下产生的极谱催化波，拟定了测定陈皮甙的新方法。在 ０．５５ ｍｏｌ／Ｌ ＨＡｃ－０．０１ｍｏｌ／Ｌ　ＮａＡｃ（ｐＨ ４．００±０．０５）－１．０×１０～（－３）ｍｏｌ／Ｌ ＫＩＯ３缓冲溶液中，陈皮甙催化波的峰电位为－１．３５ Ｖ（ｖｓ，ＳＣＥ），它的一阶导数峰峰电流与陈皮甙浓度在２．６ × １０～（－７）～２．６ × １０～（－６）ｍｏｌ／Ｌ范围内呈线性关系（ｒ＝０．９９７０，ｎ＝６）。本方法比现有的电化学方法灵敏度高一个数量级。可用于直接测定中草药贯众水提液中陈皮甙含量。     

纤维素基磁性聚偕氨肟树脂吸附Mn（Ⅶ）

用酸处理的纤维素基磁性聚偕氨肟树脂（AMAO）在溶液中吸附KMnO4，发生氧化还原反应的几率在2％以下；用碱处理的树脂（BMAO）作吸附剂，KMnO4还原为Mn（OH）4的比例剧增，达到或超过10％，并且与溶液的pH有关。但是，Mn（Ⅶ）被还原为Mn（Ⅳ）的量基本上不受KMnO4起始浓度、吸附剂添加量和吸附时间变化的影响。BMAO树脂吸附KMnO4的量是树脂偕氨肟基含量的5倍以上。超当量吸附现象反映了物理吸附的本质。     

Hygrometric Determination of Water Activities, Osmotic and Activity Coefficients, and Excess Gibbs Energy of the System MgSO4–K2SO4–H2O

Ternary aqueous solutions of MgSO₄ and K₂SO₄ have been studied by the hygrometric method at 25°C. The relative humidity of this system is measured at total molalities from 0.35 mol-kg^–1 to about saturation for three ionic-strength fractions (y = 0.25, 0.50, and 0.80 of MgSO₄. The data allow calculation of water activities and osmotic coefficients. From these measurements, the Pitzer ionic mixing parameters are determined and used to predict the solute activity coefficients in the mixture. The results are used to calculate the excess Gibbs energy at total molalities for ionic-strength fraction y.     

KN03／MCM-48催化酯交换法合成碳酸二丙酯

对KNO，／MCM-48用于丙醇和碳酸二甲酯进行酯交换合成碳酸二丙酯的催化性能进行了考察．用X射线衍射（XRD）、红外光谱（IR）和X射线荧光法研究了催化剂的结构特征和表面性质．XRD结果表明，随着K负载量的增加，载体特征峰强度逐渐减弱，但仍保留MCM-48的晶体结构．随着焙烧温度的升高，KNO3逐渐分解成K2O．分别考察了活性组分负载量、焙烧温度、焙烧时间和催化剂的用量以及反应时间对反应的影响．结果表明，KNO3／MCM-48催化剂对碳酸二丙酯的合成具有很高的催化活性．在反应温度363K，反应时间6h，催化剂用量5％，丙醇与碳酸二甲酯摩尔比为4的条件下，碳酸二甲酯的转化率可达99．9％，产物碳酸二丙酯选择性93．4％，产率93．3％．     

Crystal structure of KAsUO<Subscript>6</Subscript>·<Subscript>3</Subscript>H<Subscript>2</Subscript>O at 100 and 293 K

The crystal structure of KAsUO₆·3H₂O was solved at 100 K and 293 K. KAsUO₆·3H₂O at T = 100 K: tetragonal, P4/ncc, a = 7.2037(6) Å, c = 17.811(2) Å; Z = 4, R1 = 0.0263, wR2 = 0.0546, for 618 independent reflections; at T = 293 K: tetragonal, P4/ncc, a = 7.1600(4) Å, c = 17.746(1) Å; Z = 4, R1 = 0.0263, wR2 = 0.0433 for 427 independent reflections. The results of X-ray analysis are compared with our previous data on heat capacity of this compound, and changes that take place in the structure at elevated temperature are considered.