气相色谱-质谱联用测定苯乙烯中的阻聚剂对叔丁基邻苯二酚

 建立了气相 质谱联用 (GC/MS)测定苯乙烯中阻聚剂对叔丁基邻苯二酚含量的方法。苯乙烯样品直接进样 ,通过毛细管柱 (HP 1,30m× 0 32mmi.d .× 0 2 5 μm)分离 ,由电子轰击 (EI)源于选择离子监测 (SIM)模式下进行检测。结果表明 ,对叔丁基邻苯二酚含量在 5mg/kg～ 5 0mg/kg时线性关系良好 (r2 =0 9987) ,回收率高 ;与美国材料测试标准ASTMD4 5 90中的分光光度测量法比较具有操作简捷、准确度高的特点。     

Thermal behaviour of styrene butadiene rubber/poly(ethylene-co-vinyl acetate) blends

The thermal behaviour of styrene butadiene rubber (SBR)/poly (ethylene-co-vinyl acetate) (EVA) blends was studied by using thermogravimetry (TG) and differential scanning calorimetry (DSC). The effects of blend ratio, cross-linking systems and compatibilization on the thermal stability and phase transition of the blends were analyzed. It was found that the mass loss of the blends at any temperature was lower than that of the components, highlighting the advantage of blending SBR and EVA. The addition of compatibilizer was also found to improve the thermal stability. DSC studies indicated the thermodynamic immiscibility of SBR/EVA system even in the presence of the compatibilizer. This is evident from the presence of two different glass transition temperatures, corresponding to SBR and EVA phases in both compatibilized and uncompatibilized blends.     

聚4-重氮基苯乙烯与聚苯乙烯磺酸钠的自组装

1991年Ｄｅｃｈｅｒ等将带相反电荷的聚电解质 ,于水溶液中交替沉积在片基上 ,制备了多层超薄膜[1] ,这种制膜方法现称为静电自组装 .它操作简单 ,无需专用设备 ;一般在水体系进行 ,对环境友好 ;静电力比范德华力强 ,使它比ＬＢ膜稳定 ,所以近年来有很大发展[2 ] .现在自组装成膜驱动力已从静电力扩展到氢键力、电荷转移相互作用、疏水相互作用等 ,用于组装的组分也从聚电解质扩展到多官能团小分子、胶体粒子、无机纳米颗粒 ,ＤＮＡ、蛋白质等生物大分子等[3～ 11] .虽然自组装膜比ＬＢ膜稳定 ,但它也不耐极性溶剂、电解质水溶液等侵蚀 .如…     

Aqueous solutions—A new perspective. Amorphous carbohydrates: Science and application technology

At a recent meeting of the International Symposium on Solution Chemistry I presented a paper dealing with aqueous solutions in which water was present not in excess but as one component of a supersaturated solution with polyhydroxy compounds. In response to a request from the Editor of this Journal I have submitted this article in which I outline my general interest in the subject and its importance as a new direction for solution chemists.     

聚全氟乙丙膜电子束引发预辐射接枝AA和SSS制备阳离子交换膜的研究

利用电子束引发预辐射接枝技术,在聚全氟乙丙烯(FEP)薄膜上接枝丙烯酸(AA)和对苯乙烯磺酸钠(SSS),制备一种含羧酸基团和磺酸基团的阳离子交换膜,详细研究了反应温度、单体总浓度、pH值变化、辐照气氛及添加剂对接枝率的影响规律,明确了实验条件与接枝率的对应关系。FTIR测试证明了接枝产物是全氟乙丙烯和丙烯酸、对苯乙烯磺酸钠的接枝共聚物。     

Excess enthalpies of aqueous solutions of polyols at 25°

The excess enthalpies of aqueous solutions of nine polyols were determined at 25°C and reported in the virial form. The most interesting and new feature of this family of solutes is that the sign of the enthalpic pair interaction coefficients h_xx is positive for the first members of the series and negative for the higher homologues. Other points are the large differences found among the values of h_xx for stereoisomers, whereas pairs of enantiomers show the same values within experimental errors. An application of the group additivity method is also discussed.     

THE EFEFCT OF MAGNETIC FIELD ON POLYMERIZATION OF STYRENE IN THE PRESENCE OF POLYVINYL NAPHTHALENE AND POLYVINYL BENZOPHENONE

In the process of bulk photopolymerization of styrene initiated by AIBN decomposition polyvinyl benzophenone (PVB) can supply an effective cage for triplet-triplet energy transfer between PVB macromolecules and small molecules of AIBN to influence the molecular weight of polystyrene in weak magnetic field (less than 0.035T), that was different from the case of polyvinyl naphthalene (PVN) which supplied cages for this system only in the stronger magnetic field (more than 0.2 T) studies. It was found that in the same conditions, PVN could exert more tremendous influences on the bulk photopolymerizatiou system of styrene than PVB because in the stronger magnetic field the triplet PVN had much longer life time than PVB.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

Copolymerization of butadiene and styrene with a gadolinium tricarboxylate catalyst

Homo- and copolymerizations of butadiene (BD) and styrene (St) were carried out by gadolinium catalysts having various tricarboxylate ligands [Gd(OCOR)₃: R = CH₃, CH₂Cl, CHCl₂, CCl₃, and CF₃], to investigate the effects of ligands and discuss the cis polymerization mechanism. Polymerization of BD with Gd(OCOR)₃—(i—Bu)₃Al—Et₂AlCl catalysts was carried out in hexane at 50°C. By each catalyst, poly(BD) having a high cis content (cis = 97–99%) in 22–85% yields for 2–24 h were obtained. The ligands with low pKa values increased the polymerization activity as follows: R of Gd(OCOR)₃: CF₃ > CCl₃ > CHCl₂ > CH₂Cl ～ CH₃. On the other hand, in the polymerization of St or copolymerization of BD and St under similar conditions, the highest activity was attained by a Gd(OCOCCI₃)₃- based catalyst. The difference in the optimum ligand among the homo- and copolymerization of BD and St was discussed on the basis of energy levels of the catalysts. In the copolymers of BD and St, the cis-1,4 content of the BD unit decreased with increasing St content. Furthermore, according to the diad analysis of copolymers (St content ～ 14.5 mol %) by ¹³C NMR spectroscopy, the low cis value of the BD unit was observed in the St-BD diad (cis/trans/vinyl = 24/53/23), while the high cis value of the BD unit remained in the BD-BD diad (cis/trans/vinyl = 89/10/1). These results suggest that the terminal BD unit is controlled by the cis configuration by the coordination between the penultimate cis vinylene unit and the gadolinium metal catalyst, whereas the presence of the penultimate St unit interferes with cis polymerization of the terminal BD unit. The difference in the coordination mechanism in the course of polymerization between rare earth metal and transition metal catalysts such as the Ni(acac)₂ and Co(acac)₃-based catalyst was also discussed. © 1995 John Wiley & Sons, Inc.     

丁苯、丁腈基聚氨酯的形态与性能

用示差扫描量热法 (DSC)、红外分光光度计 (FTIR)和原子力显微镜 (AFM)研究了端羟基聚丁二烯 苯乙烯共聚物 (HTBS)、端羟基聚丁二烯 丙烯腈共聚物 (HTBN)和端羟基聚丁二烯 (HTPB)与甲苯二异氰酸酯、1 ,4 丁二醇构成的溶液法聚二烯烃基聚氨酯 (PU)的形态结构 .结果表明HTPB和HTBS基PU的相分离程度很大 ,而HTBN基PU的相分离程度小 .这可能归因于HTBS软段的极性低 ,不能与硬段形成氢键 ,而HTBN软段中的腈基具有很强的极性 ,且可以与硬段形成氢键作用 ,增加了软硬段间的相容性 ,相分离程度明显降低 .AFM表明HTBN PU随着硬段含量提高 ,表面粗糙度增大 ,由软段为连续相逐渐过渡到双连续结构 .在硬段含量 6 3%时 ,HTBN和HTPB基PU均呈双连续结构 ,而HTBS PU中硬段为连续相 .HTBN PU软段的相区尺寸在1 2nm左右 ,表面粗糙度较大 ,HPBS PU软段的相区尺寸在 1 1nm左右 ,表面粗糙度最小 ,HTPB PU存在 1 4nm和 5 0nm大小不等的软段相区尺寸 .力学性能表明 ,在软段中引入苯乙烯和丙烯腈结构 ,可使聚氨酯抗张强度分别提高 1 5和 2倍 ,模量和断裂伸长率也明显提高