卷烟搭口胶的裂解气相色谱-质谱分析

卷烟搭口胶是用在卷烟制造过程中必不可少的辅助材料,由于它直接参与烟支燃烧,因此对卷烟的产品质量和生物安全具有较大的影响.     

液晶聚酯与环氧嵌段共聚物的合成及表征

近年来 ,人们利用高分子液晶作为热固性环氧树脂的改性剂 ,不仅可以提高环氧树脂的韧性和强度 ,而且可以改善其热性能 ,为制备高性能的环氧树脂提供了一条新的途径[1,2 ] .目前报道所使用的液晶聚合物大多为液晶聚酯[3 ] 或液晶性聚氨酯[4] ,这些液晶聚合物与环氧树脂由于存在相容性不好的问题 ,给其实际应用带来了困难 .为了改善二者的相容性 ,本文采用溶液法合成了末端带有反应活性基团的聚酯型液晶聚合物 ,将它再与双酚Ａ环氧预聚物反应 ,制得了高分子液晶环氧嵌段共聚物 ,其合成路线如下 :2ＨＯＣＯＯＣＨ3+ ＨＯ(ＣＨ2 ) 6 ＯＨ　　Ｈ…     

不饱和聚酯/玻璃纤维复合材料的研究

综述了国内外近年来不饱和聚酯(UPR)/玻璃纤维复合材料的研究与开发的进展,包括不饱和聚酯用量对不饱和聚酯/玻璃纤维复合材料介电性能的影响,光和高能辐射对玻璃纤维/不饱和聚酯树脂复合材料老化性能的影响。重点介绍了不饱和聚酯组成、界面改性、防收缩剂和玻璃纤维分布对玻璃纤维/不饱和聚酯树脂复合材料性能的影响。     

Influence of axial coordination on the photophysical property of excited state of zinc porphyrin

The phenomenon that metalloporphyrins are coordinated to axial ligands is very common especially in green-plant and photosynthetic bacteria, where such coordination impacts a signifi-cant effect on both the primary charge separation in the reaction center and energy transfer in an-tenna systems[1]. In addition, it plays a key role in photodynamic therapy and medicine synthesis in a sense that some metalloporphyrins have been assembled by coordination bonds to anti-cancer drugs, enhancing the se…     

热塑性塑料熔体质量流动速率测量不确定度的评定

以聚乙烯为例讨论了热塑性塑料熔体质量流动速率测量不确定度的来源,依据JJF 1059-1999对熔体流动速率测试过程中的测量不确定度分量进行了分析和评定。7149型聚乙烯熔体质量流动速率测量结果的扩展不确定度为0.096 g/(10 m in)。     

New Phase in the Bi–Sr–Ca–Cu–O System

Cooling a melt of a Bi–Sr–Ca–Cu–O system (Bi:Sr:Ca:Cu = 4:3:3:4 or 2:2:2:4) from 1000°C-1050°C yielded crystals of a new red-colored nonsuperconducting phase, accompanying the superconducting 2212 and 2201 phases. Based on the EPR spectra, it was concluded that copper is univalent in this compound. The new phase has a composition Bi_2.2Sr_1.6Ca_1.3Cu₂Ox. The X-ray diffraction pattern has been indexed, and the unit cell parameters of the phase have been determined: space group P2/m, a = 12.93, b = 4.55, c = 10.94 ; = 102.72°.     

Production of high melt strength polypropylene by gamma irradiation

High melt strength polypropylene (HMS-PP) has been recently developed and introduced in the market by the major international producers of polypropylene. Therefore, BRASKEM, the leading Brazilian PP producer, together with EMBRARAD, the leading Brazilian gamma irradiator, and the IPEN (Institute of Nuclear Energy and Research) worked to develop a national technology for the production of HMS-PP. One of the effective approaches to improve melt strength and extensibility is to add chain branches onto polypropylene backbone using gamma radiation. Branching and grafting result from the radical combinations during irradiation process. Crosslinking and main chain scission in the polymer structure are also obtained during this process. In this work, gamma irradiation technique was used to induce chemical changes in commercial polypropylene with two different monomers, Tri-allyl-isocyanurate (TAIC) and Tri-methylolpropane-trimethacrylate (TMPTMA), with concentration ranging from 1.5 to 5.0 mmol/100 g of polypropylene. These samples were irradiated with a ⁶⁰Co source at dose of 20 kGy. It used two different methods of HMS-PP processing. The crosslinking of modified polymers was studied by measuring gel content melt flow rate and rheological properties like melt strength and drawability. It was observed that the reaction method and the monomer type have influenced the properties. However, the concentration variation of monomer has no effect.     

Characterization of the organization in shear layers via the Proper Orthogonal Decomposition

Experiments are performed in an incompressible plane turbulent mixing layer, using various hot wire rake configurations. From these experiments, the Proper Orthogonal Decomposition is applied for kernels where the space-time correlation tensor is evaluated over different spatial meshes and velocity components configurations. The resulting decompositions are then discussed in terms of characterization of the organization of the flow for various scalar or vectorial approaches of the POD. An incrtial range law is evidenced. The instantaneous contribution of the first modes of the POD to the organization of the flow is analyzed. A dynamical behavior for the organization of the flow is observed from the correlation between the first two modes contribution.     

The Newton modified barrier method for QP problems

The Modified Barrier Functions (MBF) have elements of both Classical Lagrangians (CL) and Classical Barrier Functions (CBF). The MBF methods find an unconstrained minimizer of some smooth barrier function in primal space and then update the Lagrange multipliers, while the barrier parameter either remains fixed or can be updated at each step. The numerical realization of the MBF method leads to the Newton MBF method, where the primal minimizer is found by using Newton's method. This minimizer is then used to update the Lagrange multipliers. In this paper, we examine the Newton MBF method for the Quadratic Programming (QP) problem. It will be shown that under standard second-order optimality conditions, there is a ball around the primal solution and a cut cone in the dual space such that for a set of Lagrange multipliers in this cut cone, the method converges quadratically to the primal minimizer from any point in the aforementioned ball, and continues, to do so after each Lagrange multiplier update. The Lagrange multipliers remain within the cut cone and converge linearly to their optimal values. Any point in this ball will be called a hot start. Starting at such a hot start, at mostO(In In ^-1) Newton steps are sufficient to perform the primal minimization which is necessary for the Lagrange multiplier update. Here, >0 is the desired accuracy. Because of the linear convergence of the Lagrange multipliers, this means that onlyO(In ^-1)O(In In ^-1) Newton steps are required to reach an -approximation to the solution from any hot start. In order to reach the hot start, one has to perform Newton steps, wherem characterizes the size of the problem andC>0 is the condition number of the QP problem. This condition number will be characterized explicitly in terms of key parameters of the QP problem, which in turn depend on the input data and the size of the problem.Partially supported by NASA Grant NAG3-1397 and National Science Foundation Grant DMS-9403218.     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS I.POLY(P-PHENYLENE TEREPHTHALATE)

The morphology and crystal structure of poly(p-phenylene terephthalate) (PPT), prepared by confined thin film melt (CTFMP) and solution (CTFSP) and bulk solution polymerization, were characterized by transmission electron microscopy, electron diffraction and molecular modeling. The unit cell is monoclinic (P21/a space group) with parameters a =7.89, b = 5.49, c =12.65 A α= γ= 90°,β= 100.33°, density = 1.48 g/cm3, the a, b andβ values differing slightly from those reported previously in the literature. A degree of variation in relative intensities of hk0 reflections in, apparently, untilted [001] ED patterns was observed from a given sample, suggesting some variation in molecular packing. ED evidence was found for a second phase, with [001] appearing the same as for phase Ⅱ of the related poly(p-oxybenzoate) (PpOBA)polymer. CTFMP crystals polymerized above 220°C (up to 370°C) and CTFSP crystals polymerized at 300°C consisted of lamellae 100-200 A thick.