手性液晶掺杂剂（S）—4‘—辛氧基—4—（2—酰氧基—丙氧基）联苯的合成

手性液晶掺杂剂（Ｓ）┐４┐辛氧基┐４┐（２┐酰氧基┐丙氧基）联苯的合成马汝建李培荣国斌＊（华东理工大学化学系上海２００２３７）关键词铁电液晶材料，手性液晶掺杂剂，合成，手征性１９９７－０２－０３收稿，１９９７－０８－０７修回铁电液晶显示器所用的材料...     

Evaluation of the sputtering rate variation in SIMS ultra‐shallow depth profiling using multiple short‐period delta layers

We have developed multiple short‐period delta layers as a reference material for SIMS ultra‐shallow depth profiling. Boron nitride delta layers and silicon spacer layers were sputter‐deposited alternately, with a silicon spacer thickness of 1–5 nm. These delta‐doped layers were used to measure the sputtering rate change in the initial stage of oxygen ion bombardment. A significant variation of sputtering rate was observed in the initial 3 nm or less. The sputtering rate in the initial 3 nm was estimated to be about four times larger than the steady‐state value for 1000 eV oxygen ions. Copyright © 2003 John Wiley & Sons, Ltd.     

负载型光催化材料CeO2-TiO2/SiO2的表面结构与光响应性能

采用表面改性法制备了负载型光催化材料CeO2-TiO2/SiO2,并用X射线衍射,比表面积测定,红外光谱,程序升温还原和紫外可见漫反射光谱技术对固体材料的结构和光响应性能进行了表征.结果表明,CeO2与TiO2在材料表面存在相互修饰作用,CeO2能拓展TiO2的光响应范围,使TiO2吸光区域由紫外拓宽至可见光区,从而提高材料的光能利用率;Ti4 可以进入CeO2晶格,形成Ce-O-Ti键合,使得Ti4 平均配位数增加,同时提高了CeO2体相晶格氧的活性;TiO2有助于提高CeO2在载体表面的分散程度,减小CeO2的微晶尺寸,提高固体材料的能隙值和氧化还原能力.     

水相锌二次电池正极材料V2O5/C的电化学性能研究

采用溶胶－凝胶法合成了一种V₂O₅/C复合材料.扫描电镜（SEM）和红外光谱（FTIR）分析表明,这是一种外层V₂O₅胶体包覆内层乙炔分子的多孔复合材料.以V₂O₅/C作正极,锌片为负极,Zn(ClO₄)₂溶液为电解质组成水相锌二次电池,采用循环伏安（CV）和电化学阻抗谱（EIS）等方法研究发现:V₂O₅:C质量比为1:1时电极具有最好的电化学性能,电池开路电压达1.64 V; Zn^2＋能分别在1.01 V和1.26 V处分步嵌入V₂O₅/C结构中A、B两种位置,其嵌入电流密度峰值最高可达70 mA•g^－1,并且具有较好的循环充放电性能;在一定放电深度下,V₂O₅/C电极反应速率受Zn^2＋的扩散过程控制.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

Towards advanced circuit board materials: adhesion of copper foil to ultra‐high molecular weight polyethylene composite

Polyethylene based composites are attractive materials for advanced circuit board applications because of their unique combination of properties: low dielectric constant and loss factor, light weight, high flexural modulus and low thermal expansion coefficient controlled in all spatial directions. This investigation describes a process to consolidate chopped fibers of ultra‐high molecular weight polyethylene concurrently with its bonding to a copper foil. Bonding is affected by a thin sheet of low‐density polyethylene, incorporating a crosslinking agent with a concentration gradient across the sheets thickness. In this single step process, the composite material is formed and bonded to the metal foil, achieving good adhesion without the use of extraneous glue. Copyright © 2002 John Wiley & Sons, Ltd.     

孔壁部分有序化的介孔二氧化硅材料的合成与表征

采用一种“改进的二次晶化”的方法处理介孔二氧化硅SBA-15. 用X射线衍射(XRD)、 透射电镜(TEM)、 电子衍射(ED)、 红外光谱(FTIR)以及固体核磁共振(NMR)等多种技术对样品进行了表征.　结果表明， 在所得样品的孔壁中, 原子的排列方式与普通介孔二氧化硅材料的孔壁不同， 显示一定程度的有序性. 同时, 高度有序的介孔结构得到很好的保持, 且样品的水热稳定性大幅度提高.     

材料化学实验课程体系的改革与建设

结合材料化学实验课程自身的特点及材料化学实验教学的经验，系统阐述我院材料化学实验改革的思路，通过深化材料化学实验教学改革，提高任课教师的学术水平，更新教学内容，优化教学模式，推进教材的系统性建设，实现材料化学实验教学质量的提高，激发学生的学习热情与兴趣，进一步培养学生的创新能力。     

Properties of block and graft copolymers of polybutadiene with small complexed poly(4-vinylpyridine) segments

Various diblocks, triblocks and a graft copolymer of butadiene with 4-vinylpyridine short blocks have been prepared. They were complexed with ZnCl₂ to give ionomer-like materials. For all copolymers, the T_g of the elastomeric block (?84°C to ?91°C) was unchanged by complexation. For all diblocks and triblocks with short blocks (DP _n ～ 3) the storage modulus was only slightly increased by comparison with uncomplexed materials. For the graft copolymer even with short blocks the material is less sensitive to temperature after complexation. For triblocks, when the DP _n of the vinylpyridine blocks was high enough (15 units), complexes were associated in multiplets of large size and the elastomeric properties were retained up to 200°C.     

新型无机-有机杂化微孔晶体Cd3(BDC)0.5(BTC)2(DMF)(H2O)·3DMF·H3O·H2O的合成与结构

传统分子筛是以硅氧四面体和铝氧四面体为骨架的微孔晶体材料. 近年来, 以无机-有机结构单元为骨架组成的微孔晶体材料已引起人们的广泛关注[1～19]. 该类材料是由金属离子(或金属氧簇)与有机配体(大多数是芳香多酸和多碱)构成的建筑单元通过共价键或者分子间作用力构成的. 无机-有机杂化晶体材料有多种结构类型, 如1-D, 2-D, 3-D和笼状结构等.