Binding Reaction of Hemin with Chloroquine, Quinine and Quinidine in Water-propylene Glycol Mixture

the interaction of hemin with chloroquine,quinine and quinidine was investigated in 50% water-propylene glycol mixture at pH=9,8.1,7.4 and 6.8using a spectrophotometric method.The data could be well fitted into a model consistent with the formation of a 1:1 complex between the reacting partners.In addition,the results indicated that hemin complexed more strongly with quinidine than with chloroquine and quinine,and the binding constants were pH-dependent.Moreover,it was proved that the water-propylene glycol mixture is well suitable to the study of the systems containing hemin and quinolinebased drugs.     

Ultrasonic-assisted leaching of trace metals from sediments as a function of pH

The effects of ultrasonication on the leaching of trace metals form sediments as a function of pH have been investigated using atomic absorption spectrometry. Cu, Pb, Ni, Zn and Mn were leached from sediments by ultrasonic effect using phthalate buffers at pH values of 2.2-6.0. Parameters influencing leaching, such as leaching time, solution matrix, wet or dry sample and final pH were evaluated. Results from ultrasonic leaching experiments were comparable to those of conventional procedure. In addition, this ultrasonic-assisted leaching method reduces the time required for conventional method approximately from 12 h to 25 min. Depending on the metal and sample type, metal removal increased linearly or exponentially with decreasing pH. The accuracy of the method was tested by comparing obtained results with this of conventional method. The average relative standard deviation (R.S.D.) of ultrasonic-assisted leaching method (ULM) varied between 1.71 and 3.00% for N = 36, depending on the analyte. This technique shows promise for studying chemical and biological availability and uptake/release processes for metals in sediment and soil as a function of pH.     

影响白砂糖色值测量结果的原因探讨

研究了水质、滤膜、溶液浓度、糖液ｐＨ值、混浊度的变化与白砂糖色值的关系。研究结果表明，溶液的ｐＨ变化影响最严重。不调整糖液ｐＨ与用ＨＣｌ或ＮａＯＨ调整糖液ｐＨ对比所得白砂糖色值的结果是满意的。标准偏差１１２～１８６，相对标准偏差１１６％～２２５％，调ｐＨ使结果偏高，导致产生系统误差。因此：测定白砂糖色值不宜调整糖液的ｐＨ。     

Preparation and characterisation of thermoresponsive poly[(N-isopropylacrylamide-co-acrylamide-co-(hydroxyethyl acrylate)] microspheres as a matrix for the pulsed release of drugs

Despite the large number of publications and patents concerning pH/thermoresponsive polymers, few data are available concerning the preparation of thermoresponsive cross-linked microspheres from preformed polymers. Therefore, N-isopropylacrylamide-co-acrylamide-co-(2-hydroxyethyl acrylate) copolymers were obtained as a new thermoresponsive material with a lower critical solution temperature (LCST) around 36 degrees C, in phosphate buffer at pH 7.4, and with a cross-linkable OH group in their structure. The LCST value was determined both by UV spectroscopy and microcalorimetric analysis. These copolymers were solubilised in acidified aqueous solution below their LCST, dispersed in mineral oil, and transformed into stable microspheres by cross-linking with glutaraldehyde. The thermoresponsive microspheres were characterised by optical and scanning electron microscopy, degree of swelling, and water retention. The pore dimensions of the microspheres and the retention volumes of some drugs and typical compounds were evaluated at different temperatures by liquid chromatography. Indomethacin, as a model drug, was included in the microspheres by the solvent evaporation method. Finally, the influence of temperature and of temperature cycling on drug release was investigated.     

静电和疏水效应对TGEV主蛋白酶二聚体稳定性的影响

从TGEV 3CL蛋白酶二聚体结构出发,研究了TGEV 3CL蛋白酶二聚体单体之间的静电和疏水相互作用.蛋白质的静电相互作用通过有限差分方法求解Poisson-Boltzmann方程得到,疏水相互作用通过分析溶剂可及性表面模型得到.考察了不同pH值对TGEV 3CL蛋白酶二聚体静电和疏水相互作用的影响,在pH值为5.5～8.5时,二聚体静电相互作用能、静电去溶剂化能和疏水自由能都较小,表明在该条件下静电和疏水相互作用有利于二聚体的稳定存在,这符合实验结晶所需条件.pH值对静电去溶剂化能的影响大于疏水自由能,表明静电作用是造成强酸或强碱条件下二聚体不能稳定存在的主要原因.     

Thermal oxidation of cellulose investigated by chemiluminescence. The effect of magnesium and calcium carbonates and of different pHs

Whatman cellulose impregnated with calcium and magnesium carbonates was oxidized and chemiluminescence accompanying this oxidation has been measured. It was shown that magnesium ions in deacidified cellulose pulp promote the light emission significantly. On the other hand, acid papers give the more pronounced light signals at temperatures close to ambient. The relation between chemiluminescence runs and paper degradation has been implicated, with an attempt to extrapolate half-lives of paper samples to conditions close to ambient. To cite this article: J. Rychlý et al., C. R. Chimie 9 (2006).     

On the bromination of hypericin: The gymnochrome chromophores

Summary Stepwise electrophilic bromination of hypericin in pyridine as the solvent yields regioselectively 2,5-dibromohypericin, 2,5,9-tribromohypericin, and 2,5,9,12-tetrabromohypericin. The compounds were characterized by means of NMR-, UV-Vis-, and fluorescence-spectra, andpK _a andpK* _a measurements. These properties were compared with those of hypericin on the one hand and of the recently isolated gymnochromes on the other hand.

---

Zur Bromierung des Hypericins: Die Gymnochrom-Chromophore

Zusammenfassung Schrittweise elektrophile Bromierung von Hypericin in Pyridin als Lösungsmittel liefert regioselektiv 2,5-Dibromhypericin, 2,5,9-Tribromhypericin und 2,5,9,12-Tetrabromhypericin. Diese Verbindungen wurden durch NMR-, UV-Vis- und Fluoreszenz-Spektrometrie sowie durchpK _a - undpk* _a -Messungen charakterisiert. Diese Eigenschaften wurden mit jenen des Hypericins und der kürzlich isolierten Gymnochrome verglichen.

     

Effect of synthesis method and buffer composition on the LCST of a smart copolymer of N‐isopropylacrylamide and acrylic acid

Responsive polymers have been the focus of many studies during the past decade because of their ability to change according to environmental stimuli. In this paper, we report on the development of a method to synthesize a pH/temperature‐sensitive linear copolymer, poly(N‐isopropylacrylamide‐ co‐acrylic acid)(poly(NIPAAm‐co‐AAc)), with a molecular weight of about 10⁶–10⁵ Da in water using azobisisobutyronitrile (AIBN) as the initiator. The effects of the following on the lower critical solution temperature (LCST) of the copolymer and homopolymer of NIPAAm were investigated: the type of buffer salts and pH changes of test solutions, molecular weight and concentration of homopolymer/copolymer solutions, and AAc monomer molar feed ratio (mol%). The effects of different synthesis methods on the molecular weight and on the AAc content were also evaluated. The mechanism of action in environments with different pH values is discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Origin of the stereo- and regioselectivities in the Diels-Alder reactions of azaphospholes: a DFT investigation

Computations of the Diels-Alder (DA) reactions of azaphosphole representative namely, thiazolo[3,2-d][1,4,2]diazaphosphole with 1,3-butadiene and isoprene at the density functional theory level reveal concerted mechanisms via asynchronous transition states. The activation energies (B3LYP/6-311++G**// B3LYP/6-311G**), 16-19 kcal mol⁻¹, are much smaller than the value (32.57 kcal mol⁻¹) calculated for the DA reaction of the non-phosphorus analogue, imidazo[2,1-b]thiazole with 1,3-butadiene. An electron-withdrawing group at the 3-position of the dienophile enhances both stereo- and regioselectivities, which agree nicely with the experimental values. Inclusion of solvent effect (PCM model) reveals that the stereo- and regioselectivities are not affected appreciably. The relative stabilities of the transition structures corresponding to the endo/exo stereoisomers and meta (P/Me, 1:3)/para (P/Me, 1:4) regioisomers have been rationalized on the basis of the secondary molecular orbital interactions.     

Influence of pH on formation and stability of phosphatidylcholine/phosphatidylserine coatings in fused-silica capillaries

The effect of pH on the formation and stability of phospholipid coatings in fused-silica capillaries in electrophoresis was investigated. A liposome solution consisting of 3 mM of 80:20 mol% phosphatidylcholine/phosphatidylserine (PC/PS) in N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) buffer was used as coating material. The coating was prepared by a method described earlier and five steroids were used as neutral model analytes. First, the effect of pH of the coating solution on the formation and stability of phospholipid coatings was studied at pH 6.5-8.5. The pH of the background electrolyte (BGE) solution (HEPES) was either kept constant at pH 7.4 or made similar to the pH of the liposome coating solution. Results showed that attachment of the coating on the fused-silica wall mostly depends on the protonation of amines of the phospholipids and HEPES. The ability of the phospholipid coating to withstand changes in pH was then investigated by coating at pH 7.5 and separating steroids with acetic acid, 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS), HEPES, or glycine BGE, adjusted to pH between 4.5 and 10.8. The results showed that with use of BGE solution at pH 10.8, the separation of steroids was not successful and the electroosmotic flow was high because of leakage of the phospholipid coating during preconditioning of the capillary with BGE solution. There was no phospholipid leakage with a BGE solution of pH 4.5, indicating that the protonated form of the functional groups of PS and HEPES participating in the attachment of the phospholipid coating to the capillary play an essential role in the success of the coating.