液相色谱-串联质谱法测定蜂产品中吡虫啉及其3种代谢物

建立了蜂蜜和蜂花粉中吡虫啉及其代谢物吡虫啉烯烃、吡虫啉脲、6-氯烟酸的液相色谱-串联质谱(LC-MS/MS)检测方法.在QuEChERS方法基础上,针对目标物化学性质和样品杂质情况,对提取溶液的pH值、提取次数、净化材料等参数进行了优化.最终以5％甲酸-乙腈溶液提取两次,无水MgSO4、NaCl盐析分层,提取液经增强型脂类去除材料(EMR)净化,以LC-MS/MS进行测定,基质外标法进行定量分析.结果表明,蜂蜜和蜂花粉中吡虫啉、吡虫啉烯烃、吡虫啉脲、6-氯烟酸的平均加标回收率为86.0％～111.5％, 相对标准偏差在1.7％～9.6％之间, 检出限分别为0.20, 3.50, 0.40和14.00 μg/kg,定量限分别为0.60, 11.64, 1.20和45.00 μg/kg.本方法分析速度快、灵敏度高、重现性好,适用于蜂蜜和蜂花粉中吡虫啉及其3种代谢物的快速测定.     

Neutral and cationic alkylmanganese(II) complexes containing 2,6-bisiminopyridine ligands

Manganese alkyl complexes stabilised by 2,6-bis(N,N'-2,6-diisopropyl-phenyl)acetaldiminopyridine ((iPr)BIP) have been selectively prepared by reacting suitable alkylmanganese(II) precursors, such as homoleptic dialkyls [(MnR(2))(n)] or the corresponding THF adducts [{MnR(2)(thf)}(2)] with the mentioned ligand. For R=CH(2)CMe(2)Ph or CH(2)Ph, formally Mn(I) derivatives are produced, in which one of the two R groups migrates to the 4-position of the central pyridine ring in the (iPr)BIP ligand. In contrast, a true dialkyl complex [MnR(2)((iPr)BIP)] can be isolated for R=CH(2)SiMe(3). In solution, this compound slowly evolves to the corresponding Mn(I) monoalkyl derivative. A detailed study of this reaction provides insights on its mechanism, showing that it proceeds through successive alkyl migrations, followed by spontaneous dehydrogenation. Protonation of [Mn(CH(2)SiMe(3))(2)((iPr)BIP)] with the pyridinium salt [H(Py)(2)][BAr'(4)] (Ar'=3,5-C(6)H(3)(CF(3))(2)) leads to the cationic species [Mn(CH(2)SiMe(3))(Py)((iPr)BIP)](+). Alternatively, the same complex can be produced by reaction of the pyridine complex [{Mn(CH(2)SiMe(3))(2)(Py)}(2)] with the protonated ligand salt [H(iPr)BIP](+)[BAr'(4)](-). This last reaction allows the synthesis of analogous cationic alkylmanganese(II) derivatives, when precursors of type [MnR(2)((iPr)BIP)] are not available. Treatment of these neutral and cationic (iPr)BIP alkylmanganese derivatives with a range of typical co-catalysts (modified methylaluminoxane (MMAO), B(C(6)F(5))(3), trimethyl or triisobutylaluminum) does not lead to active ethylene polymerisation catalysts.     

Enantiospecific synthesis of ABC-ring system of A-nor and abeo 4(3→2) tetra and pentacyclic triterpenes

Enantiospecific synthesis of ABC-ring systems of A-nor and abeo 4(3→2) tetra and pentacyclic triterpenes has been accomplished starting from the readily available monoterpene (R)-carvone. (R)-Carvone was used as the B-ring of the target molecules. A lithium-liquid ammonia mediated cyclisation of δ,?-unsaturated ester was employed for the cyclopentannulation at the C-5 and C-6 carbons of carvone and an RCM reaction was employed for the cyclohexannulation to generate the ABC-ring system of A-nor tetra and pentacyclic triterpenes. The strategy has been extended for the synthesis of the ABC-ring system of abeo 4(3→2) tetra and pentacyclic triterpenes.     

An investigation of structure-reactivity relationships of δ-alkenyl oximes; competitive thermal reactions leading to cyclic nitrones and/or N-unsubstituted bicyclic isoxazolidines

Thermal reactions of C-aryl δ-alkenyl oximes give N-unsubstituted bicylic lactone, lactam and pyrrolidine fused isoxazolidines by an intramolecular oxime olefin cycloaddition pathway (IOOC) and/or cyclic nitrones by an azaprotio cyclotransfer (APT) route; a number of factors, including the nature of the aryl group, the oxime geometry and the structure of the linker between the oxime and the terminal alkene, contribute to the competition.     

Stereoselective total synthesis of alkaloid caulophyllumine B using iterative olefin cross-metathesis protocol

Herein we report the first total synthesis of alkaloid caulophyllumine B in 14 steps by an iterative olefin cross-metathesis strategy from l-glutamic acid.     

Experimental study of the retention properties of a cyclo olefin polymer pillar array column in reversed-phase mode

Experimental measurements to study the retention capacity and band broadening under retentive conditions using micromachined non-porous pillar array columns fabricated in cyclo olefin polymer are presented. In particular, three columns with different depths but with the same pillar structure have been fabricated via hot embossing and pressure-assisted thermal bonding. Separations of a mixture of four coumarins using varying mobile phase compositions have been monitored to study the relation between the retention factor and the ratio of organic solvent in the aqueous mobile phase. Moreover, the linear relation between the retention and the surface/volume ratio predicted in theory has been observed, achieving retention factors up to k=2.5. Under the same retentive conditions, minimal reduced plate height values of h(min)=0.4 have been obtained at retention factors of k=1.2. These experimental results are compared with the case of non-porous and porous silicon pillars. Similar results for the plate heights are achieved while retention factors are higher than the non-porous silicon column and considerably smaller than the porous pillar column, given the non-porous nature of the used cyclo olefin polymer. The feasibility of using this polymer column as an alternative to the pillar array silicon columns is corroborated.     

Electrochromatography in cyclic olefin copolymer microchips: A step towards field portable analysis

In order to develop a portable and disposable instrument for on-site analysis of neutral compounds, a lauryl methacrylate monolith has been synthesized into a cyclic olefin copolymer microdevice for reversed-phase electrochromatography purposes. This monolith was tested in capillary to evaluate electrochromatographic performances in terms of electroosmotic flow (EOF) mobility, retention and efficiency prior to its transfer into the microfluidic device. The produced monolithic bed exhibited a good run-to-run repeatability, column-to-column reproducibility and batch-to-batch reproducibility, with relative standard deviation (RSD) values below 9% for EOF mobility, retention factors and heights of theoretical plate. The electrochromatographic performances of the monolith were optimized by reducing irradiation time. Photopolymerization time of 10 min was found to be the best process in order to obtain a robust, retentive and efficient system. The on-chip performances of this monolith were evaluated in detail for the reversed-phase electrochromatographic separation of polycyclic aromatic hydrocarbons, with plate heights reaching down to 15 μm when working at optimal velocity. Aiming at the maximum simplification of instrumental fabrication and operation, a direct injection from a 2 μL droplet was compared with more conventional dynamic injection process.     

固体多核 NMR 研究 Mo/Hβ-Al2O3 催化剂在烯烃歧化反应中的积炭

 采用固体多核 13C, 27Al 及 29Si MAS NMR 结合吸附气体 Xe 后的 129Xe NMR, 详细研究了乙烯和 2-丁烯歧化生成丙烯反应过程中 6%Mo/Hβ-Al2O3 催化剂上积炭的类型和落位. 结果表明, 积炭以饱和烷烃为主, 并随着反应的进行生成更多的支链烷烃, 积炭主要分布在 Hβ 分子筛上, 并主要落位在分子筛的交叉孔道处.     

Synthesis of Functionalized 2,3-Dihydropyrroles Promoted by Samarium Diiodide

Abstract

The intermolecular reductive coupling of 1,1-diaryl-2,2-dicyanoethylenes or 1,1-diaryl-2-cyano-2-ethoxycarbonylethylenes with substituted benzalazines induced by samarium diiodide was studied. Functionalized 2,3-dihydropyrroles were prepared in good yields under neutral and mild conditions.     

Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generator side‐chains: Effect of spacer‐chain length

Photoinduced depolymerization of poly(olefin sulfone)s possessing photobase generators in the side‐chain was investigated. Irradiation with UV light generated base on the side‐chains and induced depolymerization based on proton abstraction on the main‐chain. The effect of the length of the spacer chain, which connects the photobase‐generating moiety to the polymer main chain on the photoinduced depolymerization, also was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3873–3880