Stimuli-Triggered Strand Displacement-Based Multifunctional Gene Detection Platform Controlled By A Multi-Input DNA Logic Gate

Highly sensitive detection of various cancer related genes is of great significance in a number of biomedical applications. Here we describe a logic-controlled multifunctional platform that is capable of detecting two kinds of gene sequences with a 2-aminopurine (2-AP) as a quencher-free fluorescent probe, the fluorescence of which dramatically increases when it loops out the DNA helices. This detection platform is assembled from the split ATP aptamer, G-quadruplex, and the antisense strands of the P53 and K-ras genes, together with their complementary components. It is selectively activated by ATP and K⁺ via the target-induced DNA strand displacement, enabling the exposure of two long toehold regions that allow the P53 and K-ras genes to trigger the next DNA strand displacements. A hairpin DNA containing a looped-out 2-AP in the stem is finally released, accompanying with a significant increase of fluorescence intensity. The whole process behaves as a four-input AND logic gate. Such a logic-controlled gene detection platform is able to convert the external stimulation of ions and biomolecules into a detectable fluorescence output and functions well in gene detection.     

Multidimensional Gas Chromatography–Mass Spectrometry Method for Fingerprinting Polycyclic Aromatic Hydrocarbons and Their Alkyl-Homologs in Crude Oil

The composition of polycyclic aromatic hydrocarbons in crude oil is usually too complex to use standard capillary gas chromatography to separate all of the components. In this study, a multidimensional gas chromatography–mass spectrometry (GC-MS) technique was used to analyze polycyclic aromatic hydrocarbon fractions of crude oil collected from the Dongying oil field in the Bohai Sea. A DB-17MS column (30?m?×?0.25?mm?×?0.25?µm) was used as a prefractionating column and only selected heart-cuts were transferred to the second chromatographic dimension (HP-5MS, 15?m?×?0.25?mm?×?0.25?µm) by a pressure-adjusted continual flow-type switching device for quantification of the polycyclic aromatic hydrocarbons. The chromatographic elements and parameters, such as detector selection and column combinations, were optimized. Naphthalene, phenanthrene, fluorene, dibenzothiophene, chrysene, and their C₁–C₄ alkyl homologs were identified. The profile of the polycyclic aromatic hydrocarbons obtained using the multidimensional GC-MS method was compared with the results obtained by traditional one-dimensional GC-MS.     

Efficient synthesis of chalcone-4′-sulfonyl chlorides and fluorides

A library of 4′-chloro- and 4′-fluorosulfonyl-substituted chalcones was prepared via the aldol-type condensation reactions of 4-acetylbenzene-1-sulfonyl halides with various aromatic aldehydes, either in absolute ethanol or glacial acetic acid, in the presence of dry HCl. This represents the first examples of chalcone sulfonyl halides in which the phenone ring bears one of these functional groups. The reactivity of the chalcone sulfonyl halides were strongly dependent on the styrene ring substituents; sulfonyl chlorides reacted with most nucleophiles (e.g. amines, alcohols), while sulfonyl fluorides reacted only with charged nucleophiles (e.g. phenolates).     

Facile fabrication of asphaltene-derived graphene-polyurethane sponges for efficient and selective oil-water separation

Based on the natural graphene-structure in the raw asphaltene material, a graphene-polyurethane sponge (GPU) oil-absorption material was prepared via a facile and inexpensive route of dip-coated sponge carbonization, which used low-value petroleum asphlatene as the dip-coating reagent and polyurethane sponges as the template. The GPU presents high hydrophobic and super oleophilic properties, as well as the excellent oil absorption performance. And its chloroform absorption capacity could reach 123 times its original mass, which is significantly higher than that of most reported oil absorbents. Furthermore, the GPU exhibits good recyclability. It has the promising applications in the pollution control of spilt oil.     

Investigation and optimization of the recovery of coal fines using oil agglomeration process: Use of waste oils from different sectors

The high cost of the bridging liquid subdues the implementation and commercialization of oil agglomeration process. To overcome this problem, waste oils from different sectors were used in this present study. The performance of the process was assessed based on the responses like ash rejection and organic matter recovery. The aim of the present study was to investigate the usage of waste oils from different sectors and to optimize and analyze the behavioral pattern showcased by different variables (pulp density, oil dosage, agglomeration time and oil type) using response surface methodology (Box-Behnken design). Experimental investigation shows that the optimum pulp density, oil dosage, agglomeration time and oil type condition obtained as 3%, 15%, 15?min and waste engine oil, respectively. At optimum condition, the % ash rejection and % organic matter recovery obtained as 63.94% and 81.8%, respectively.     

Rational Fabrication of Anti‐Freezing,Non‐Drying Tough Organohydrogels by One‐Pot Solvent Displacement

Tough hydrogels, polymeric network structures with excellent mechanical properties (such as high stretchability and toughness), are emerging soft materials. Despite their remarkably mechanical features, tough hydrogels exhibit two flaws (freezing around the icing temperatures of water and drying under arid conditions). Inspired by cryoprotectants (CPAs) used in the inhibition of the icing of water in biological samples, a versatile and straightforward method is reported to fabricate extreme anti‐freezing, non‐drying CPA‐based organohydrogels with long‐term stability by partially displacing water molecules within the pre‐fabricated hydrogels. CPA‐based Ca‐alginate/polyacrylamide (PAAm) tough hydrogels were successfully fabricated with glycerol, glycol, and sorbitol. The CPA‐based organohydrogels remain unfrozen and mechanically flexible even up to ?70 °C and are stable under ambient conditions or even vacuum.     

Fabrication,characterization, and performance evaluation of polyethersulfone/TiO2 nanocomposite ultrafiltration membranes for produced water treatment

In the present work, development of neat and nanocomposite polyethersulfone membranes composed of TiO₂ nanoparticles is presented. Membranes are fabricated using nonsolvent phase inversion process with the objective of improving antifouling, hydrophilicity, and mechanical properties for real and synthetic produced water treatment. Membranes are characterized using scanning electron microscopy, Fourier‐transform infrared, contact angle, porosity measurement, compaction factor, nanoparticles stability, and mechanical strength. The performance of prepared membranes was also characterized using flux measurement and oil rejection. Fourier‐transform infrared spectra indicated that noncovalence bond formed between Ti and polyethersulfone chains. The contact angle results confirmed the improved hydrophilicity of nanocomposite membranes upon addition of TiO₂ nanoparticles owing to the strong interactions between fillers and water molecules. The increased water flux for nanocomposite membranes in comparison with neat ones can be due to coupling effects of improved surface hydrophilicity, higher porosity, and formation of macrovoids in the membrane structure. The membrane containing 7 wt% of TiO₂ nanoparticles was the best nanocomposite membrane because of its high oil rejection, water flux, antifouling properties, and mechanical stability. The pure water flux for this membrane was twice greater than that of neat membrane without any loss in oil rejection. The hydrophilicity and antifouling resistance against oil nominates developed nanocomposite membranes for real and synthetic produced water treatment applications with high performance and extended life span.     

Development of completely bio‐based epoxy networks derived from epoxidized linseed and castor oil cured with citric acid

Bio‐based epoxy resins were synthesized from nonedible resources like linseed oil and castor oil. Both the oils were epoxidized through in situ method and characterized via Fourier transform infrared and ¹H‐NMR. These epoxidized oils were crosslinked with citric acid without using any catalyst and their properties compared with diglycidyl ether of bisphenol A‐epoxy. The tensile strength and modulus of epoxidized linseed oil (ELO) were found to be more than those of epoxidized castor oil (ECO)‐based network. However, elongation at break of ECO was significantly higher than that of both ELO and epoxy, which reveals its improved flexibility and toughened nature. Thermogravimetric analysis revealed that the thermal degradation of ELO‐based network is similar to that of petro‐based epoxy. Dynamic mechanical analysis revealed moderate storage modulus and broader loss tangent curve of bio‐based epoxies confirming superior damping properties. Bioepoxies exhibit nearly similar contact angle as epoxy and display good chemical resistant. The preparation method does not involve the use of any toxic catalyst and more hazardous solvents, thus being eco‐friendly.     

Influence of graphene nanosheets on stereocomplex crystallization behaviors of star‐shaped poly (D(L)‐lactide) stereoblock copolymer

The nanocompsites of star‐shaped poly(D‐lactide)‐co‐poly(L‐lactide) stereoblock copolymers (s‐PDLA‐PLLA) with two‐dimensional graphene nanosheets (GNSs) were prepared by solution mixing method. Crystallization behaviors were investigated using differential scanning calorimetry, polarized optical microscopy, and wide angle X‐ray diffraction. The results of isothermal crystallization behaviors of the nanocompsites clearly indicated that the GNS could remarkably accelerate the overall crystallization rate of s‐PDLA‐PLLA copolymer. Unique stereocomplex crystallites with melting temperature about 207.0°C formed in isothermal crystallization for all samples. The crystallization temperatures of s‐PDLA‐PLLAs shifted to higher temperatures, and the crystallization peak shapes became sharper with increasing GNS contents. The maximum crystallization temperature of the sample with 3 wt% GNS was about 128.2°C, ie, 15°C higher than pure s‐PDLA‐PLLA. At isothermal crystallization processes, the halftime of crystallization (t_0.5) of the sample with 3 wt% GNS decreased to 6.4 minutes from 12.9 minutes of pure s‐PDLA‐PLLA at 160°C.The Avrami exponent n values for the nanocomposites samples were 2.6 to 3.0 indicating the crystallization mechanism with three‐dimensional heterogeneous nucleation and spherulites growth. The morphology and average diameter of spherulites of s‐PDLA‐PLLA with various GNS contents were observed in isothermal crystallization processes by polarized optical microscopy. Spherulite growth rates of samples were evaluated by using combined isothermal and nonisothermal procedures and analyzed by the secondary nucleation theory. The results evidenced that the GNS has acceleration effects on the crystallization of s‐PDLA‐PLLA with good nucleation ability in the s‐PDLA‐PLLA material.