多组分烟用香精定量分析方法的研究进展

综述了近年来烟用香精、香料各组分化合物的定量分析方法的研究进展。面积归一化法、内标法、外标法和标准加入法等常用色谱定量分析方法主要用于烟用香精、香料中目标化合物或单个组分的测定;多标定量法、特征峰-内标定量法和多元校正法能深入剖析烟用香精复杂体系中各组分含量(引用文献48篇)。     

Theoretical modeling of the chemical synthesis and detonation performance of polynitrocubane derivatives

Theoretical work was performed based on experimental methods described in the literature to simulate and explore feasible routes for the synthesis of energetic octanitrocubane (ONC) and polynitrocubane derivatives. In respective gaseous and liquidous environments, using cubane as the raw material, ONC was successfully synthesized through carboxylation, amination, oxidation and nitration stages, and the related reaction energy barriers were simultaneously acquired. In particular, the polyparametric calibrated gaseous molecular formation enthalpy and the group additivity approach-estimated molecular density were incorporated using the Kamlet-Jacobs equation to evaluate the detonation performance of polynitrocubane derivatives. Some high-energy-density derivatives were found to have superior characteristics as compared with traditional hexagon (RDX) and octagon (HMX) explosives.     

Comprehensive Review on Application of FTIR Spectroscopy Coupled with Chemometrics for Authentication Analysis of Fats and Oils in the Food Products

Currently, the authentication analysis of edible fats and oils is an emerging issue not only by producers but also by food industries, regulators, and consumers. The adulteration of high quality and expensive edible fats and oils as well as food products containing fats and oils with lower ones are typically motivated by economic reasons. Some analytical methods have been used for authentication analysis of food products, but some of them are complex in sampling preparation and involving sophisticated instruments. Therefore, simple and reliable methods are proposed and developed for these authentication purposes. This review highlighted the comprehensive reports on the application of infrared spectroscopy combined with chemometrics for authentication of fats and oils. New findings of this review included (1) FTIR spectroscopy combined with chemometrics, which has been used to authenticate fats and oils; (2) due to as fingerprint analytical tools, FTIR spectra have emerged as the most reported analytical techniques applied for authentication analysis of fats and oils; (3) the use of chemometrics as analytical data treatment is a must to extract the information from FTIR spectra to be understandable data. Next, the combination of FTIR spectroscopy with chemometrics must be proposed, developed, and standardized for authentication and assuring the quality of fats and oils.     

Preliminary study on aerosol particle addition calibration method for on-line quantitative analysis of airborne radioactive particles with ICP-MS

An ambient aerosol concentration enrichment system coupled with ICP-MS for real-time monitoring of airborne radioactive particles is now under development. ICP-MS is very sensitive to sample introduction conditions, so it is necessary to develop an easy-use calibration method for on-line quantitative analysis in field application. In this paper, a calibration method using standard solution instead of monodisperse particles was established and validated preliminarily. First of all, four parameters for the method were determined experimentally, including: uptake flow rate and nebulisation efficiency of the Microconcentric nebuliser, nebulisation/transport efficiency of Aridus Desolvating Sample Introduction System, and Relative Sensitivity Factor between ¹⁵⁹?Tb and ¹⁷⁴?Yb. Then, monodisperse terbium nitrate particles were generated by a commercial Vibrating Orifice Aerosol Generator. Continuous aerosols of ytterbium nitrate droplets were nebulised from standard solution. They were mixed together, desolvated through the membrane dryer and introduced into ICP-MS for on-line analysis of terbium nitrate particles. The air sampled from nuclear environment was also introduced into ICP-MS to investigate the effect of flow rate on instrument responses. Finally, atom numbers of ¹⁵⁹?Tb in discrete terbium nitrate particles were determined using the calibration method and compared to the calculated value. Results show that when air flow rate increase from 10?mL?min^?1 to 100?mL?min^?1, the ratio of ¹⁵⁹?Tb ion count to ¹⁷⁴?Yb ion intensity keeps constant although instrument sensitivity decreases by a factor of 25. The relative standard deviation of ¹⁵⁹?Tb atom number measured is better than 18%. The discrepancy with the calculated value could be attributed to the over-estimation of atom number in the particles generated by VOAG because there was some liquid leakage in the VOAG.     

基于两平行线及其线上三点的摄像机标定方法

在大视场交通监控摄像机的标定中,由于不便于放置大尺寸标定靶标,常采用交通标线构成的特定几何图形替代标定靶标,但许多交通场景仅有一组平行的车道分界交通标线,难以获得传统标定方法所需的标定约束条件。针对此类交通场景,选取两平行交通标线和其中一条线上的三点作为标定参考物,依靠其中一条线上三点在单幅图像中的像素坐标、三点间的两个距离值及平行线间距作为约束条件来完成摄像机的标定。建立了图像坐标系与世界坐标系之间新的换算关系,推导出了摄像机内外参数的求解公式,探讨了旋转角对测量误差的影响。实验结果表明,在约束条件不足的情况下能够获得较好的摄像机参数近似解,沿道路方向上的测距精度优于对比文献的结果,具有标定参考物选取容易、操作简便、几何约束条件少等优点,适用于交通监控系统中大视场摄像机的快速标定场合。     

Rationelle Kalibrierung von Neutronensonden bei der radiometrischen Wassergehaltsbestimmung Anwendung unter Meßnetz- und Feldversuchshedingungen

Determinations of soil moisture witli the aid of neutron moisture meters require calibrations under real conditions. Some efficient methods for calibrating such moisture gauges are described and working examples are presented.     

多元Copula密度估计的小波局部阈值方法

为了量化资产之间相依结构的局部特征,本文将小波阈值规则引入Copula参数估计,提出多元Copula密度的小波局部阈值估计量,发现Copula密度的光滑度指数、维数和采样容量是影响估值精度的重要因素,这一点也得到了以正态Copula为仿真算例的支持。本方法增强了参数Copula建模的局部自适应能力,进而有助于改进资产的市场风险估值与最优化配置。     

A microscopic pedestrian-simulation model and its application to intersecting flows

We develop a microscopic pedestrian-simulation model in which pedestrian positions are updated at discrete time steps. At each time step, each pedestrian probabilistically selects a direction of movement from a predetermined set according to a logit-type function that considers the dynamics of other pedestrians around, and then selects a step size that satisfies a certain distribution. We perform a number of field experiments on real intersecting pedestrian flows with four different angles. We then validate and calibrate the model using sample data on the deviation angles, step velocities, and velocity–density relations obtained from the experiments.     

基于机器视觉的三维灰度重构技术

基于双目立体视觉三维重构原理，采用主动扫描实现特征匹配的三维灰度重构技术，通过特征结构光扫描物体表面，由经过预标定的两套成像传感器拍摄其图像，经过图像处理程序提取出特征点，完成特征匹配，再计算出物体表面三维轮廓，同时将成像传感器中的灰度信息映射到相应的特征点，从而实现特征点的三维信息和颜色信息的重构和匹配。该技术为三维彩色逼真场景的重构奠定了基础。     

高能激光能量计溯源问题研究北大核心

由于高能激光能量计标定过程中没有标准的能量测量装置和标准的激光源,无法采用常规方法对其进行标校。提出了一种利用现有小能量计从低到高逐级多次传递不确定度的方法,以及一种利用能量等效原理对激光能量计进行标校的方法。不确定度传递法方法简单,但环节较多导致不确定度较大。等效标定法包括电标法和光标法,电标法对设计要求较高,但求解过程相对简单。光标法工程实现难度要低得多,但必须事先对灯组余热及热损失进行测算。等效法的三个条件与误差大小关系紧密,在结构设计中必须严格考虑,它是提高测量准确性的根本,其次要尽量减少不确定度传递的中间环节,最后需要对误差项进行科学分析和测定,在此基础上对这些项进行相应的修正和补偿。