Production of multi-hollow polymer particles by the stepwise acid/alkali method

 Recently, we reported that multi-hollow polymer particles can be prepared from carboxylated polymer particles by the stepwise alkali/acid method. In this article, an attempt was made to prepare similar particles from acid-swellable polymer particles by the stepwise treatment with acid and alkali, which was named the stepwise acid/alkali method. The acid-swellable particles were produced by emulsion terpolymerization of styrene, butyl acrylate, and dimethyl 2-amino ethyl methacrylate. The effects of initial pH value, temperature, and time in the acid and alkali treatment processes on the multi-hollow structure were examined. Received: 18 December 1996 Accepted: 11 March 1997     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Influence of the heating conditions on the thermal and chemical behaviour of solid particles undergoing a fast endothermic decomposition

This paper deals with models describing the thermal and chemical behaviour of solid particles undergoing fast endothermic reactions under the influence of an external heat flux. The heat source temperature is supposed to be constant, to increase with time, or to deliver a simple thermal flash. It is shown that the pyrolysis conditions (reaction temperature, conversion, etc.) depend on the chemical characteristics of the reaction and also to a large extent on the external heating conditions. Relationships are proposed to take into account these parameters. The results are applied to the thermal decomposition of NaHCO₃. The pyrolysis of cellulose is finally chosen in order to show how these operating parameters can also affect the selectivity of a more complex reaction.     

三氧化铬超微粒的制备与表征

我们曾首次报道了Fe_2O_3超微粒溶胶具有大的三阶光学非线性响应,其X~((3))值与商品用的掺杂CdS_(1-x)Se玻璃相近,并对其产生机制进行了初步研究.本文用微乳液法制备了经十二烷基苯磺酸钠(DBS)和硬脂酸(ST)表面修饰的Cr_2O_3超微粒,并用TEM、IR、XPS及紫外可见吸收光谱进行了表征.     

Nonionic latices in aqueous media part 1. Preparation and characterization of polystyrene latices

A series of non-ionic polystyrene latices in aqueous media containing particles with a narrow size distribution have been prepared using a nonyl phenol poly(ehylene glycol) condensate as the surfactant, methoxy poly(ethylene glycol methacrylate) as the comonomer/stabilizer, and ascorbic acid/hydrogen peroxide as the initiator system. As a control synthesis for comparison with the above latex, a charge stabilized polystyrene latex was prepared, using an anionic surfactant and potassium persulphate as the initiator. Latices employing a combination of charge plus steric stabilization mechanisms were also prepared, in order to investigate the effect of the non-ionic surfactant and the comonomer/stabilizer. The particle size of the latices was measured by transmission electron microscopy, the surface charge density by conductimetric titration and the glass transition temperature of the polymer by differential scanning calorimetry. The latex prepared using non-ionic ingredients, showed no titratable charge and exhibited a profound lowering of the glass transition temperature, with respect to the charge stabilized latex. On the basis of these results, schematic models for the polymerization mechanism and the morphology of the latex particles are proposed.     

Comparative study of pretreatment methods for the determination of metals in atmospheric aerosol by electrothermal atomic absorption spectrometry

A comparative study of pretreatment methods for the determination of 10 elements (As, Cd, Pb, V, Ni, Mn, Cr, Cu, Fe, Al) in atmospheric aerosols by electrothermal atomic absorption spectrometry (ETAAS) was conducted. For the digestion of the particulates collected in filters, six methods were compared using a mixture of HNO₃ and HF with or without the addition of various oxidative agents (HClO₄ or H₂O₂) or acids (HCl). The comparative study was performed using loaded cellulose filter samples, which were digested in Parr bombs and heated in a conventional oven at 170 °C for 5 h. The extraction efficiency and blanks were compared and it was proved that the digestion method using only HNO₃–HF extracted most of the metals and gave the lowest blanks. The HNO₃–HF mixture was selected for the development of an improved microwave digestion method specific for aerosol-loaded filters. The operating parameters were optimized, so that quantitative recovery of the reference materials NIST 1649a urban dust and NIST 1648 urban particulate matter was achieved. The blank of cellulose and teflon filters were also determined and compared. Teflon filters present the lowest blanks for all the elements. The obtained limits of detection for each type of filters were adequate for environmental monitoring purposes. ETAAS instrumental operation was also optimized for the compensation and the elimination of interferences. The temperature optimization was performed for each metal in every type of filter and optimized parameters are proposed for 10 elements.     

The role of complexing ligands in the formation of non-aggregated nanoparticles of zirconia

The hydrolysis and condensation of zirconium n-propoxide in n-propanol have been chemically controlled via the complexation of the zirconium precursor with acetylacetone. The size of the zirconium oxide-based particles is mainly controlled by the complexation ratio x=[acac]/[Zr]. the mean size increases from nanometric to submicronic range when x decreases from 1 to 0.1. Amorphous colloidal particles are obtained at room temperature. They result from a competitive growth/termination mechanism of zirconium-oxo species in the presence of acac surface capping agents. However non-aggregated nanocrystalline particles of tetragonal zirconia, about 2 nm in diameter are formed upon aging at 60°C when hydrolysis is performed in the presence of paratoluene sulfonic acid (PTSA).     

微波合成SrTiO3的工艺、结构与性能研究

应用微波会成这一材料合成新方法制备SrTiO3，研究了不同工艺条件下微波合成产物的结构，确定出制备纯净SrTiIO。的合成条件．对微波合成的工艺及其影响因素进行详细的探索，从合成产物的显微结构、粒度分布、比表面积、烧结性能等方面比较了微波合成与常规固相合成的差别，结果表明微波合成与各种常规方法相比有合成时间短、合成工艺简单、合成产物性能好等特点，是一种有发展潜力的材料合成技术．     

新型亚微米亲水作用色谱的制备及其在加压毛细管电色谱中的应用

采用改良Stöber法合成580 nm亚微米单分散的二氧化硅微球，并以此为基质，通过"巯基-烯"点击化学反应将半胱氨酸成功键合到修饰有乙烯基团的二氧化硅微球表面，合成了一种新型亚微米亲水作用固定相（Cys-VTMS-SiO₂）。采用高压匀浆法制备了新型亚微米亲水色谱填充柱，通过不同乙腈比例、缓冲盐浓度和pH条件下对甲苯、丙烯酰胺和硫脲的分离分析揭示其亲水机理。依托加压毛细管电色谱平台，成功实现了对核苷、酚类、胺类及多肽等亲水性物质的快速有效分离，其有望应用于其他强极性和亲水性化合物的分离分析。     

含羧基/环氧树脂的丙烯酸酯共聚物乳液的制备和交联——1.含羧基丙烯酸酯共聚物乳液的分子设计和制备

以在低温下(<100℃)实现含羧基/环氧树脂的丙烯酸酯共聚物乳液的交联固化为目的,进行了分子设计;估算了共聚物的组成,用碱滴定法测定了乳胶粒表面的羧基数,并比较了不同单体配比所得乳液的成膜性能.