Laser induced fluorescence coupled to capillary electrophoresis for the determination of fluoroquinolones in foods of animal origin using molecularly imprinted polymers

A method for the simultaneous determination of four fluoroquinolones of veterinary use (ciprofloxacin, danofloxacin, enrofloxacin and sarafloxacin) in two complex matrixes, such as bovine raw milk and pig kidney, has been established and validated. The method is based on the use of capillary electrophoresis (CE) coupled with a very sensitive detection mode, such as laser induced fluorescence (LIF) detection, due to the fact the all the compounds selected show native fluorescence. In order to achieve high selectivity in the sample treatment procedure, a commercially available molecularly imprinted polymer has been used for the solid phase extraction of the analytes. Once the retention and elution processes were optimized, the final extract was analyzed by CE-LIF using a 325 nm He–Cd laser. Optimum separation was obtained in a 70 cm × 75 μm capillary using a 125 mM phosphoric acid solution at pH 2.8 with 36% methanol as background electrolyte. The method provided very low detection limits, ranging from 0.17 to 0.98 μg/kg for milk and 1.10 to 10.5 μg/kg for kidney, with acceptable precision and satisfactory recoveries.     

Preparation of magnetic indole-3-acetic acid imprinted polymer beads with 4-vinylpyridine and β-cyclodextrin as binary monomer via microwave heating initiated polymerization and their application to trace analysis of auxins in plant tissues

Auxin is a crucial phytohormone for precise control of growth and development of plants. Due to its low concentration in plant tissues which are rich in interfering substances, the accurate determination of auxins remains a challenge. In this paper, a new strategy for isolation and enrichment of auxins from plant tissues was obtained by the magnetic molecularly imprinted polymer (mag-MIP) beads, which were prepared by microwave heating initiated suspension polymerization using indole-3-acetic acid (IAA) as template. In order to obtain higher selective recognition cavities, an enhanced imprinting method based on binary functional monomers, 4-vinylpyridine (4-VP) and β-cyclodextrin (β-CD), was adopted for IAA imprinting. The morphological and magnetic characteristics of the mag-MIP beads were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy and vibrating sample magnetometry. A majority of resultant beads were within the size range of 80-150μm. Porous surface morphology and good magnetic property were observed. Furthermore, the mag-MIP beads fabricated with 4-VP and β-CD as binary functional monomers exhibited improved recognition ability to IAA, as compared with the mag-MIP beads prepared with the individual monomer separately. Competitive rebinding experiment results revealed that the mag-MIP beads exhibited a higher specific recognition for the template than the non-imprinted polymer (mag-NIP) beads. An extraction method by mag-MIP beads coupled with high performance liquid chromatography (HPLC) was developed for determination of IAA and indole-3-butyric acid (IBA) in plant tissues. Linear ranges for IAA and IBA were in the range of 7.00-100.0μgL(-1) and 10.0-100.0μgL(-1), and the detection limits were 3.9 and 7.4μgL(-1), respectively. The analytical performance was also estimated by seedlings or immature embryos samples from three different plant tissues, pea, rice and wheat. Recoveries were in the range of 70.1-93.5%. The results show that the present imprinting method is a promising approach for preparation of selective adsorbents for sample preparation of auxin analysis in plant tissues.     

A new application of imprinted polymers: Speciation of organotin compounds

Molecular imprinting technology has been employed for the first time to prepare a specifically affinity chromatographic stationary phase for speciation purposes. Tributyltin has been chosen as the template molecule and the non-covalent approach has been applied. Three different polymerization methods have been evaluated: (i) a composite material, (ii) a polymer prepared via-Iniferter grafting; (iii) an emulsion polymer. Columns packed with different polymers have been evaluated by liquid chromatography (LC) coupled to inductively coupled plasma mass spectrometry (ICP-MS). The chromatographic conditions as well as the analytical characteristics of the developed method are discussed in this paper. Our findings have shown formation of specific cavities in the grafted Iniferter as well as in the emulsion polymers with the latter achieving resolution of four organotin compounds. Detection limits are similar to those obtained with commercial, but not specific, stationary phases (6 pg for monobutyltin, MBT; 10 pg for both tributyltin, TBT, and triphenyltin, TPhT; and 20 pg for dibutyltin, DBT). The main advantage of this proposed stationary phase is that good recovery is obtained for all species, including MBT. Baseline resolution for TBT and TPhT has also been obtained. The high selectivity of this column prevents matrix interferences. The method has been validated by analyzing two biota reference materials (ERM-CE477 mussel tissue and T-38 oyster tissue).     

Metal ion mediated molecularly imprinted polymer for selective capturing antibiotics containing beta-diketone structure

A new molecularly imprinted polymer (MIP) targeting to quinolones (Qs) and tetracyclines (TCs) was synthesized using itaconic acid (ITA) and ciprofloxacin (CIP) as a functional monomer and template molecule, respectively. Factors affecting the overall performance of MIP were investigated, and the results showed that Fe(3+) ion play a vital role in the formation of MIP with high molecular imprinting effect. Meanwhile, the chelating ability of monomer, species of template molecule, as well as the molar ratio of monomer and template also contribute to the performance of the obtained MIP. Cyclic voltammetry verified that, with the participation of Fe(3+) ions, a ternary complex of ITA-Fe(3+)-CIP could be formed before polymerization. Compared with conventional MIP prepared from commonly used monomer, methacrylic acid (MAA), the new MIP show significantly enhanced molecular imprinting effect and higher capacity for specific adsorption of target compounds as revealed by static and dynamic binding experiments. The MIP was successfully used as solid-phase extraction (SPE) adsorbent for enriching a broad spectrum of antibiotics containing beta-diketone structure from surface water sample. HPLC detection showed that high recovery rate (78.6-113.6%) was found in these spiked antibiotics, whereas recovery rate for the non structurally related drugs, epinephrine (EP) and dopamine (DOPA), was very low (4.7-7.6%) on the MIP cartridges. The results demonstrate that the MIP prepared by the strategy proposed in this work, could specifically target to a series of structurally related antibiotics containing beta-diketone structure.     

Preparation and application of solid-phase microextraction fiber based on molecularly imprinted polymer for determination of anabolic steroids in complicated samples

A relatively selective, chemically and physically robust SPME fiber was developed in a simple way with testosterone-imprinted polymer, and then directly coupled with gas chromatography-mass spectrometry (GC-MS) for selective extraction and analysis of anabolic steroids. The factors influencing polymerization (i.e., cross-linker, polymerization solvent, polymerization time) were optimized in detail and the polymer was characterized by scanning electron microscope, infrared spectrometer and thermogravimetric analyzer. Furthermore, the extraction performance of the MIP-coated SPME fibers such as extraction ability and selectivity was evaluated. Moreover, the interaction mode between target analytes and fiber coating was deducted. Finally, the method for extraction and determination of androsterone, stanolone, androstenedione and methyltestosterone by the homemade MIP-coated SPME fibers with GC-MS was obtained. It was applied to the simultaneous analysis of four anabolic steroids in the spiked human urine with the satisfactory recoveries.     

Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear

A simple, rapid and sensitive method for the determination of pirimicarb in tomato and pear using polymer monolith microextraction (PMME) based on the molecularly imprinted polymer (MIP) monolith combined with high-performance liquid chromatography-photodiodes array detector (HPLC-PAD) was developed. By optimizing the polymerization conditions, such as the nature of porogenic solvent and functional monomer, the molar ratio of the monomer and cross-linker, an pirimicarb MIP monolith was synthesized in a micropipette tip using methacrylic acid (MAA) as the functional monomer, ethylene dimethacrylate (EGDMA) as the cross-linker and the mixture of toluene-dodecanol as the porogenic solvent. The MIP monolith showed highly specific recognition for the template pirimicarb. The monolith was applied for the selective extraction of pirimicarb in tomato and pear. Several parameters affecting MIP-PMME were investigated, including the nature and volume of extraction solvent, sample volume, flow rate and sample pH. Under the optimum PMME and HPLC conditions, the linear ranges were 2.0-1400 μg/kg for pirimicarb in tomato and pear with the correlation coefficient of above 0.999. The detection limits (s/n=3) were both 0.6 μg/kg. The proposed method was successfully applied for the selective extraction and determination of pirimicarb in tomato and pear.     

对氨基偶氮苯印迹聚合物的吸附特性及在痕量检测中的应用

采用本体聚合法以α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂合成了对氨基偶氮苯的分子印迹聚合物,成功分离了印迹分子和结构相似物甲基橙,并考察了流动相组成、pH、温度和流速对分离效果的影响。用静态吸附法和Scatchard分析考察了对氨基偶氮苯在印迹聚合物上的结合特性。建立了一种在线富集痕量对氨基偶氮苯的分析方法,回收率85%以上。样品只需要过滤处理就可用于富集检测,实现了快速的痕量分析。     

溶胶-凝胶法制备红霉素印迹固相萃取材料及其选择性吸附

以红霉素为模板分子,采用溶胶-凝胶印迹技术,合成对红霉素具有特异选择识别性能的印迹聚合材料.采用红外光谱、扫描电子显微镜、热重分析以及比表面积测定技术对印迹聚合物的结构和表面性能进行详细探讨,结果表明所得印迹聚合物比表面积为266.2m2/g,粒径为600nm左右的颗粒材料.选择3种抗生素类药物进行选择吸附研究,结果表明,该聚合物对红霉素的分离因子最高达到2.20.优化固相萃取条件,结果表明用甲醇:乙酸(75:25,V/V)作为洗脱剂时对红霉素的洗脱效果最好.结合液相色谱技术,该印迹材料成功的分离和富集红霉素肠溶片中的红霉素,回收率达到104.5%。     

二苯甲酰-D-酒石酸分子印迹整体柱的制备及其色谱性能

采用紫外光谱法选择丙烯酰胺为功能单体,以二苯甲酰-D-酒石酸(D-DBTA)为模板分子,丙烯酰胺为功能单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯和十二醇为混合致孔剂,用原位分子印迹技术,合成了D-DBTA分子印迹整体聚合物。在优化色谱条件的基础上,25min内基本实现了DBTA消旋体的手性分离,分离度达1.25。对色谱分离过程中的热力学进行分析,在所考察的温度范围内,色谱分离存在两种不同的热力学过程,且两者与范特霍夫方程能够很好地吻合。在这两种热力学过程的转换温度处,分离因子α达最大值。     

柚皮苷分子印迹膜的水相制备与识别

以柚皮苷为印迹分子,PEG为致孔剂,在水相中制备了柚皮苷分子印迹壳聚糖膜.分别讨论了交联剂、致孔剂和印迹分子的用量对印迹膜结构和性能的影响.用SEM观察了致孔剂对印迹膜形貌及孔径的影响.紫外吸收光谱分析、柚皮苷在不同体系中的溶解度变化,以及红外光谱分析的结果表明功能聚合物壳聚糖和模板分子柚皮苷间形成了氢键.膜的渗透实验结果表明,在水相中,柚皮苷分子印迹膜能有效地从新橙皮苷和柚皮苷的混合液中分离出印迹分子柚皮苷,选择透过率为11.16%.