Spectrophotometric flow-injection determination of zinc in plant digests based on a spot test

A spot test was implemented in a flow-injection system for the spectrophotometric determination of zinc in digests of plant materials. It is based on the influence of Zn²⁺ on the oxidation rate of 1-naphthylethylenediamine (NED) by hexacyanoferrate(III) under acidic conditions. In order to control the precipitate formation and to maintain the resulting suspension, a micellar medium was established by adding Triton X-100. The proposed system handles about 65 samples per hour, meaning 72 μg NED and 9.0 mg K₃[Fe(CN)₆] per determination. Baseline drift is usually <0.01 absorbance per hour and the analytical signals for 0.5-2.5 mg l⁻¹ Zn range within ca. 0.07-0.45 absorbance. Linearity of the analytical curve is fair (r>0.999, n=6) and detection limit was estimated as 0.2 mg l⁻¹ Zn. Results are precise (R.S.D.<1%, n=10) and in agreement with flame atomic absorption spectrometry and with certified values of standard reference materials.     

Determination of low levels of polymer additives migrating from polypropylene to food simulated liquids by capillary SFC and solvent venting injection

Summary Methods for the determination of specific migration of polymer additives from polypropylene to aqueous acetic acid and isooctane have been studied. The migrants were extracted from aqueous acetic acid and characterized by supercritical fluid chromatography (SFC) with flame ionization detection (FID) and mass spectrometry (MS). The isooctane simulant was concentrated and injected directly into the SFC. Injection of extracts after incubation, using the solvent venting injection technique in the SFC, enabled additive concentrations as low as 10 ppb in 150 ml simulant to be determined, corresponding to a specific migration level of approximately 1 g additive/dm² polymer.     

SHAPE MEMORY EFFECT OF PU IONOMERS WITH IONIC GROUPS ON HARD-SEGMENTS

SMPU （shape memory polyurethane） non-ionomers and ionomers, synthesized with poly（c-caprolactone） （PCL）, 4, 4＇-diphenylmethane diisocyanate （MDI）, 1,4-butanediol （BDO）, dimethylolpropionic acid （DMPA） were measured with cyclic tensile test and strain recovery test. The relations between the structure and shape memory effect of these two series were studied with respect to the ionic group content and the effect of neutralization. The resulting data indicate that, with the introduction of asymmetrical extender, the stress at 100% elongation is decreased for PU non-ionomer and ionomer series, especially lowered sharply for non-ionomer series; the fixation ratio of ionomer series is not affected obviously by the ionic group content; the total recovery ratio of ionomer series is decreased greatly. After sufficient relaxation time for samples stretched beforehand, the switching temperature is raised slightly, whereas the recovery ratio measured with strain recovery test method is lowered with increased DMPA content. The characterization with FT-IR, DSC, DMA elucidated that, the ordered hard domain of the two series is disrupted with the introduction of DMPA which causes more hard segments to dissolve in soft phase; ionic groups on hard segment enhance the cohesion between hard segments especially at high ionic group content and significantly facilitate the phase separation compared with the corresponding non-ionomer at moderate ionic group content.     

Characterization of the Effects of Vanadium Traps in Cracking Catalysts by Imaging Secondary Ion Mass Spectrometry and Microactivity Test

The vanadium trapping effect of Mg and La containing additives in cracking catalyst contaminated with 2300 ppm Ni and 4700 ppm V has been analyzed by microactivity test (MAT) and imaging secondary ion mass spectrometry (SIMS). The results of SIMS imaging are consistent with cracking activity data and show that the La/spinel is a superior vanadium trap for the fluid catalytic cracking of hydrocarbons (FCC) operation. La/spinel serves as a dual function additive for both vanadium trap and SO_x removal. The optimum amount of La/spinel added to the cracking catalyst is about 15% by weight. This results in an increased catalytic activity, an increase in gasoline yield, and a decrease in coke and gas factors. The MgAl₂O₄ phase of Mg/Al₂O₃ additive is found capable of trapping vanadium while its MgO of Mg/Al₂O₃ phase can migrate to zeolite particles (the active component of the FCC catalyst) that, in turn, causes a decline in the activity of that catalyst.     

Complexation of an acrylic resin by tertiary amines: synthesis and characterisation of new binders for antifouling paints

Antifouling coatings are the most reliable way to prevent biofouling of immersed surfaces. As concerning the high toxicity of organotin paints, the tendency is the development of coatings, which do not present environmental risks. In this work, we prepare binders from modification of acrylic copolymers containing free carboxylic acid groups. Biocides chosen are tertiary ammonium salts; alkyl chain substituents with different length are considered. The chemical modifications of resins are carried out via a single step reaction. Modification extents are monitored through proton nuclear magnetic resonance and thermogravimetric analysis and the modified resins are characterised by Fourier transform infrared spectroscopy. The glass transition temperature of the acrylate systems is assessed by dynamical mechanical analysis (pin point method) and compared with data obtained by differential scanning calorimetry. The erosion and antifouling properties of the binders are followed during an exposure to marine environment by a visual observation.     

电迁移微离子色谱及其应用

本文提出一种新型的离子色谱方法,采用恒电流电场代替机械泵输送离子,研制出体积小、重量轻、成本低、易操作的电迁移微离子色谱仪,并检测了几种常见的阴离子,Cl~-、Br~-、NO_2~-的检测极限为10~(-11)～10~(-12)mol,峰高和保留时间重现性相对标准偏差均<3％,进样量与峰高的线性关系良好。     

Benzocoumarins from the rhizomes of Juncus acutus

Investigation of the ethyl acetate extract of Juncus acutus rhizomes revealed seven benzocoumarins, probably derived from oxidation of phenanthrenes already isolated from the plant. The structures were determined by means of spectroscopic methods. The anti-algal activity of the isolated compounds tested on the green alga Pseudokirchneriella subcapitata are reported here.     

Hydrophilic core-shell microspheres: a suitable support for controlled attachment of proteins and biomedical diagnostics

Functional hydrophilic microspheres (latex particles) have found various applications in life sciences and in medicine - particularly in latex diagnostic tests. This paper presents a comprehensive review of studies on latex particles with a hydrophilic interfacial layer composed of various hydrophilic polymers with reactive groups at the ends of macromolecules or at each monomeric unit along the chain. Typical examples of these hydrophilic polymers are poly(2-hydroxyethyl methyl methacrylate), poly(acrylic acid), poly(N,N-dimethylacrylamide), polysaccharides, poly(ethylene oxide) and polyglycidol. Hydrophilic microspheres with different morphologies (uniform or core-shell, see Figure) have been synthesized by emulsion and dispersion polymerizations. The chemical structure of polymers which constitute the interfacial layer of microspheres has been investigated using a variety of instrumental techniques (such as XPS, SSIMS and NMR) and analytical methods based on specific chemical reactions suitable for the determination of particular functional groups. Microspheres are exposed to contact with proteins in the majority of medical applications. This paper presents examples of studies on the attachment of these biomacromolecules to microspheres. The relation between the structure of the interfacial layer of microspheres and the ability of these particles for the covalent binding of proteins is discussed. Several examples of diagnostic tests, in which hydrophilic microspheres with adsorbed or covalently immobilized proteins were used as reagents, are presented. The paper also contains a short review of the application of magnetic hydrophilic particles for protein separation. Examples of hydrophilic latex particles used for hemoperfusion or heavy metal ion separation are presented. Hydrophilic microspheres with uniform or core-shell morphologies.     

Principle of a new immunoassay based on electrophoretic mobility of poly(styrene/alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol) microspheres: application for the determination of helicobacter pylori IgG in blood serum

The principle of a novel latex diagnostic test for the determination of antibodies against Helicobacter pylori in blood sera is described. The test is based on the measurement of the electrophoretic mobility of the microspheres with immobilized H. pylori antigens. The electrophoretic mobility of these microspheres depends on the concentration of the antibodies against H. pylori in suspending medium. Particles with hydrophilic polyglycidol in the surface layer were used for the test. The microspheres were obtained by an emulsifier-free emulsion copolymerization of styrene and alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol macromonomer (D(n) = 220 nm, diameter polydispersity factor D(w)//D(n) = 1.02). Activation of polyglycidol hydroxyl groups with cyanuric chloride allowed for covalent immobilization of H. pylori antigens. The fraction of H. pylori not specifically adsorbed onto the microspheres was negligible. Changes of the electrophoretic mobility of the microspheres with the surface concentration of the covalently immobilized H. pylori antigens Gamma = (1.6 +/- 0.3) . 10(-3) g m(-2) were suitable for the detection of the antibodies in the sera of patients with titer in the range (determined by the indirect ELISA test) from 1:500 to 1:32 000.     

Assessment of corrosion resistance of surface-coated galvanized steel by analysis of the AC impedance spectra measured on the salt-spray-tested specimen

In the present work, corrosion resistance of surface-coated galvanized steel was quantitatively determined by an analysis of the alternating current (AC) impedance spectra measured on the salt-spray-tested specimen. To evaluate the corrosion resistance of the surface-coated galvanized steel, AC impedance spectroscopy was performed on the salt-spray-tested specimen previously exposed to salt-sprayed corrosive environment. From the analysis of the impedance spectra, the area fraction transient of white rust θ ₂(t) was theoretically derived from the equivalent circuit equation by using two fitting parameters. The values of the two fitting parameters were determined by fitting the empirical transient equations to the area fraction of the resin coating layer and to the total resistance obtained from the impedance spectra measured, respectively. From the analyses of θ ₂(t) for four kinds of surface-coated galvanized steels with various resin coating layers, it is indicated that as the values of the two fitting parameters decrease in the order of CP, GI, OD and OM (commercial trade names) specimens, the corrosion resistance increases in that order as well. Furthermore, from the quantitative comparison of the two fitting parameters with the polarization resistance of the upper resin coating layer R _p determined from the potentiodynamic polarization curve, it is suggested that the two fitting parameters decrease in value as well with increasing R _p.