Air microwave-induced plasma: Relation between ion density and atomic oxygen density

Electron temperature and ion density are measured in an air microwave-induced plasma (2450 MHz) by means of a floating double probe. A 'cinetic scheme for ion formation and decay is set up, and a relationship between atomic oxygen and ion densities is obtained. From this relationship an order-of-magnitude of atomic oxygen concentration in the discharge is derived and compared with results obtained by optical actinometry in another work.     

纳米微孔NixZn(1-x)Fe2O4的水热合成研究

０引言尖晶石型铁酸盐是一类重要的磁性材料，它可用于防止电磁波辐射设备以及隐身材料中的吸波剂犤１，２犦，具有价格低廉、吸波性能优良的特点。同时尖晶石型铁酸盐也是一类重要的催化剂，９０年代初又发现了氧缺位的该类化合物具有将CO２还原为C的优良催化性能犤３犦。因此，有关铁酸盐的制备及性能研究一直是化学工作者和材料科学工作者感兴趣的领域。随着新的合成方法的不断涌现，对传统铁氧体材料进行结构改造以提高其性能是一个重要的研究发展方向，本文采用模板剂造孔技术，首次在NixZn（１－x）Fe２O４水热合成中选用模板剂，…     

2D层状焦磷酸锰(Ⅱ)[NH4]2[Mn3(P2O7)2(H2O)2]的结构和磁性研究

A two-dimensional layered manganese(Ⅱ) pyrophosphate, [NH₄]₂[Mn₃(P₂O₇)₂(H₂O)₂] (1), has been synthesized hydrothermally. Its structure is determined by single-crystal X-ray diffraction analysis. Its structure is built up by MnO₆ octahedra and P₂O₇ units, with ammonium NH₄⁺ cations residing in the interlayer regions. The manganese pyrophosphate layer consists of infinite chains of cis and trans edge sharing MnO₆ octahedra linked by P₂O₇ units. Magnetic susceptibility measurements show that this compound exhibits ferrimagnetic-like ordering below 3.2 K. Further study shows that there are two possible superexchange pathways via the oxygen anions in Mn²⁺ ions. Owing to the different bridging modes of O^2-, the competition between ferromagnetic interactions and antiferromagnetic interactions in Mn²⁺ ions results in the ferrimagnetic behavior of 1.     

三种化学方法合成K0.5Bi0.5TiO3粉体的机理比较

采用溶胶-凝胶法、水热法和溶胶-凝胶-水热法三种化学方法合成K_0.5Bi_0.5TiO₃ (KBT)无铅压电陶瓷粉体. 用X射线衍射(XRD)分析产物的结构, 用扫描电镜(SEM)和透射电镜(TEM)观察产物的形貌. 实验结果表明, 三种化学方法均可获得纯钙钛矿相KBT粉体, 但不同工艺获得的粉体在形貌和生成机制上有很大的不同. 溶胶-凝胶法属高温固相扩散机制, 需要700 ℃以上温度煅烧才可获得KBT纯相, 且粉体颗粒度大、团聚严重. 水热法符合溶解-结晶机制, 生长出四方形的KBT纳米片. 溶胶-凝胶-水热法利用了凝胶团聚体空间链状结构的模板作用, 通过原位结晶机制生长出KBT纳米线.     

Synthesis and Crystal Structure of 3,3,6,6-Tetramethyl-N-hydroxy-9-ethyl-1,8-dioxo-1,2,3,4,5,6,7,8,9,10-decahydroacridine

1 INTRODUCTION 1,4-Dihydropyridines (1,4-DHPs) are well-knowncompounds because of their pharmacological pro-perty as calcium channel modulators[1, . The che- 2]mical modifications, such as the introduction of dif-ferent substituents[3, or heteroatoms[5], of the DHP 4]ring have allowed the expansion of researches onthe structure-activity relationship to gain new in-sights into the molecular interactions at the receptorlevel. In fact, it is well established th…     

Dawson结构杂多化合物(C_5H_6N)_(4.5)H_(1.5)(P_2W_(18)O_(62))·1.5H_2O的水热合成及晶体结构

用水热合成方法制备了Dawson结构杂多化合物(C5H6N)4.5H1.5(P2W18O62).1.5H2O,通过红外光谱和X射线单晶衍射对其进行了表征.结果表明,该化合物属于单斜晶系,C2/m空间群.a=2.6970(3)nm,b=1.39730(16)nm,c=2.0777(2)nm,β=102.33(0)°,V=7.64927(364)nm3,Z=4,R=0.0412,wR2=0.1016.标题化合物阴离子通过质子化的吡啶分子在氢键作用下形成了一维无限链状结构.     

2-取代吡啶半菁染料的无溶剂微波合成及光谱性质的理论研究

在微波促进无溶剂条件下, 由N-甲基-2-甲基吡啶碘盐与取代芳香醛在哌啶作用下合成了一系列2-取代的吡啶半菁染料, 产物结构由元素分析, ¹H NMR, MS, IR, UV得到确认. 该方法操作简便, 收率高. 在此基础上, 对N-甲 基-2-(p-N,N-二甲氨基-苯乙烯基)吡啶半菁染料的光谱性质进行了理论计算.     

手性芳酰胺类分子钳的设计与微波合成

以间苯二甲酸为隔离基, 酰胺键桥联L-氨基酸甲酯构成手臂, 在微波辐射下合成了具有不同手性中心和裂穴的新型手性芳酰胺类分子钳. 结构均经¹H NMR, IR及元素分析确证, 并考察了其对芳香胺类化合物和D/L-氨基酸甲酯的识别性能. 初步研究表明, 这类分子钳受体不仅对中性小分子具有优良的识别性能, 其结合常数(K_a)可达2.66×10³ L•mol^－1, 而且对D/L-氨基酸甲酯亦具有良好的手性识别能力.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

Characteristics of vinyl iodide microwave plasma etching of GaAs/AlGaAs and InP/InGaAs heterostructures

Vinyl iodide (C₂H₃I) microwave discharges with additions of H₂ and Ar are found to provide faster etch rates than conventional CH₄/H₂/Ar discharges for InP, InGaAs, GaAs, and AlGaAs. This is a result of the relatively high volatilities of indium, gallium, and aluminum iodide species. The etched features are smooth and anisotropic over a wide range of do self-biases (–150 to –350 V), process pressures (1–20mTorr), and microwave powers (150–500 W). The polymer that forms on the mask during the plasma exposure can be readily removed in O₂ discharges. Electron spectroscopy for chemical analysis (ESCA) showed that the etched surfaces are slightly deficient in the group V elements under most conditions, but changes to the optical properties of the semiconductors are minimal. No defects are visible by transmission electron microscopy (TEM) in GaAs or InP samples etched at dc biases –250 V.