Synthesis and characterization of 3-phenylethynyl endcapped matrix resins

The synthesis of 3-phenylethynylphenol, and its applicability as a high temperature cross-linking endcap for high T_g polyarylene ethers is described. It was synthesized in high yields and purity using the palladium catalyzed coupling reaction between the protected 3-bromo or iodo phenol and phenylacetylene. The yield of the reaction was found to be highly dependent on the structure of the halide used, the reaction temperature, and the concentration of phenylacetylene. The use of the protected phenol in the palladium catalyzed reaction was also extended to the high yield synthesis of 3-ethynylphenol and protected 4-ethynylphenols. The complete synthesis of 3-phenylethynylphenol, 3-ethynylphenol, and protected 4-ethynylphenol in high yields has been demonstrated and is discussed herein. Three new phenylethynyl functionalized arylene ether matrix resins have been synthesized in high yields and purity by reacting 3-phenylethynylphenol with 4,4′-dichlorodiphenyl sulfone, 4,4′-difluorobenzophenone, and bis(4-fluorophenyl)phenyl phosphine oxide, via nucleophilic poly(arylene ether) synthesis conditions. These low molecular weight materials undergo thermally induced chain extension/branching to yield an insoluble three-dimensional network at reaction temperatures of around 380°C. The low molecular weight arylene ethers endcapped with the phenylethynyl group demonstrate excellent flow characteristics and a wide processing window of about 250°C. Crosslinking of the 4,4′-bis(3-phenylethynyl phenoxy)diphenyl sulfone system for 30 min at 350°C in air afforded a T_g value of 265°C by differential scanning calorimetry measurements. Trace metal analysis for palladium and copper showed absence of these metals that would otherwise detract from the excellent thermal stability. The synthesis and characterization of these phenylethynyl endcapped arylene ether matrix resins is discussed. © 1995 John Wiley & Sons, Inc.     

手性不对称Salen Ni配合物的模板法合成及表征

本文采用过渡金属镍(Ni)作为金属模板合成了2个未见报道的手性不对称Salen Ni配合物，该法具有反应步骤少、纯化处理简单、产率高的显著优点。用¹H NMR、FTIR、UV-Vis、CD光谱及元素分析对配合物进行了详细的表征，证明该模板合成法的可靠性。此外，对该法合成的手性不对称Salen Ni配合物的红外光谱、电子吸收光谱、圆二色光谱的性质做了进一步研究。     

Theoretical investigation of the decarbonylation of acetaldehyde by Fe+ and Cr+.

We report a comprehensive theoretical study on the decarbonylation of acetaldehyde by Fe+ and Cr+. Various intermediates, transition states, and products involved in the decarbonylation reactions are fully optimized at the B3LYP/6-311+G(2df,2pd) level of theory. The potential energy surfaces (PESs) corresponding to [M,O,C2,H4]+(M=Cr and Fe) are examined in detail using B3LYP and CCSD(T) methods, respectively. The validity of these theoretical methods is calibrated with respect to the available thermochemical data. Calculations suggest that the Cr+ mediated decarbonylation of acetaldehyde takes place in four steps on the sextet surface: encounter complexation, C-C activation, aldehyde H-shift, and nonreactive dissociation, in good accordance with the Co+ mediated decarbonylation of acetaldehyde [Zhao, Zhang, Guo, Wu, Lu, Chem. Phys. Lett. 2005, 414, 28], while for the Fe+/acetaldehyde system decarbonylation can occur on both the quartet and the sextet PESs. The quartet pathway, which experiences spin-orbit coupling between the two surfaces, is energetically more favorable; whereas along the sextet decarbonylation coordinate several high-energy barriers are revealed. The theoretical results are compared with the experimental product kinetic energy and angular distributions of decarbonylation of acetaldehyde by Fe+ and Cr+ measured using a crossed-beam technique [Sonnenfroh, Farrar, J. Am. Chem. Soc. 1986, 108, 3521].     

环境和生物样品中铂族金属的分析研究进展

评述了近年来环境和生物样品中痕量铂族金属的分析研究进展，重点介绍了样品的预处理和分离富集技术以及检测手段等。     

Recoil spectrometry: Ion accelerator based elemental characterisation of surface layers

Recoil Spectrometry covers a group of techniques that are very similar to the well known Rutherford backscattering Spectrometry technique, but with the important difference that one measures the recoiling target atom rather than the projectile ion. This makes it possible to determine both the identity of the recoil and its depth of origin from its energy and velocity, using a suitable detector system. The incident ion is typically high-energy (30–100MeV)³⁵C1,⁸¹Br or¹²⁷I. Low concentrations of light elements such as C, O and N can be profiled in a heavy matrix such as Fe or GaAs. Here we present an overview of mass and energy dispersive recoil Spectrometry and illustrate its successful use in some typical applications.     

Energy-adjustedab initio pseudopotentials for the second and third row transition elements

Summary Nonrelativistic and quasirelativisticab initio pseudopotentials substituting the M^(Z–28)+-core orbitals of the second row transition elements and the M^(Z–60)+-core orbitals of the third row transition elements, respectively, and optimized (8s7p6d)/[6s5p3d]-GTO valence basis sets for use in molecular calculations have been generated. Additionally, corresponding spin-orbit operators have also been derived. Atomic excitation and ionization energies from numerical HF as well as from SCF pseudopotential calculations using the derived basis sets differ in most cases by less than 0.1 eV from corresponding numerical all-electron results. Spin-orbit splittings for lowlying states are in reasonable agreement with corresponding all-electron Dirac-Fock (DF) results.     

Addition of nitriles to alkaline earth metal complexes of 1,2-bis[(phenyl)imino]acenaphthenes

Compounds [Sr(dpp-bian)(thf)4] (2), [Ba(dpp-bian)(dme)2.5] (3) and [Mg(dtb-bian)(thf)2] (4) (dpp-bian = 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene; dtb-bian = 1,2-bis[(2,5-di-tert-butylphenyl)imino]acenaphthene) were prepared by reduction of dpp-bian and dtb-bian with an excess of metallic Mg, Sr, or Ba in THF or DME. Reactions of [Mg(dpp-bian)(thf)3], 3, and 4 with diphenylacetonitrile gave keteniminates [Mg(dpp-bianH)(NCCPh2)(thf)2] (5), [Mg(dtb-bianH)(NCCPh2)(thf)2] (6), and [Ba(dpp-bianH)(NCCPh2)(dme)2] (7), respectively. The reaction of 2 with CH3C[triple chemical bond]N in THF gave [{Sr(dpp-bianH)[N(H)C(CH3)C(H)CN](thf)}2] (8). The compounds 2, 3, 5-8 were characterized by elemental analysis, and IR and NMR spectroscopy. Molecular structures of 2, 3, 7, and 8 were determined by single-crystal X-ray diffraction. In contrast to reactions of alkali-metal reagents, magnesium amides, or yttriumalkyls with alpha-H acidic nitriles, which are accompanied by an amine or an alkane elimination, the reactions of [Mg(dpp-bian)(thf)3] (1), 2, 3, and 4 with such nitriles proceeded with formation of Mg, Sr, and Ba keteniminates and simultaneous protonation of one nitrogen atom of the bian ligand. The NMR spectroscopic data obtained for complex 5 indicated that in solution the amino hydrogen atom underwent the fast (on the NMR timescale) shuttle transfer between both nitrogen atoms of the dpp-bianH ligand.     

Nitrido-Sodalithe. II. Synthese,Struktur und Eigenschaften von M(6+(y/2)–x)H2x[P12N24]Zy mit M = Fe,Co, Ni,Mn; Z = Cl,Br, I; 0 ≤ x ≤ 4; y ≤ 2

Nitrido-Sodalites. II. Synthesis, Crystal Structure, and Properties of M_{(6+(y/2)–x)}H_2x[P₁₂N₂₄]Z_y with M = Fe, Co, Ni, Mn; Z = Cl, Br, I; 0 ≤ x ≤ 4; y ≤ 2 The nitrido sodalites M_{(6+(y/2)–x)}H_2x[P₁₂N₂₄]Z_y with M = Fe, Co, Ni, Mn; Z = Cl, Br, I; 0 ≤ x ≤ 4; y ≤ 2 are obtained by the reaction of HPN₂ or [PN(NH₂)₂]₃ with the metal halogenide MZ₂ (T = 700°C). The compounds are isotypic to Zn_(7–x)H_2x[P₁₂N₂₄]Cl₂. An increase of the ionic radii of the cations or anions results in an expansion of the lattice which is caused by an increase of the P? N? P angle. The influence of the cation is more dominant than that of the anion. By reacting [PN(NH₂)₂]₃ with metal halogenide (MZ₂) hydrogen free, X-ray amorphous products are obtained. The formation of the chloride-containing P? N-sodalite in this reaction begins at temperatures below 450°C.     

Occurrence and distribution of metals and porphyrins in Nigerian coal minerals

The metal contents of Nigerian coal minerals were analyzed using an atomic absorption spectrophotometer. Calcium, Na, and Fe occurred as the major elements with concentrations ranging from 9 782 μg/g for Ca to 432 μg/g for Na whereas K, Mg, Mn, Ni, Cr, Zn, Pb, and Cu, which occurred at trace levels ranged from 673.73 μg/g for Mg to 2.97 μg/g for Mn. The results of the quantitative analysis of porphyrins extracted from the coal minerals showed that Onyeama coal has the highest amount of porphyrins (ca～0.96 μg/g) while Okpara has the lowest (ca～0.30 μg/g). The porphyrins were qualitatively characterized by a combination of thin layer chromatography (TLC), infrared, and ultraviolet-visible spectrophotometers. The results of the mid infrared analysis (MIR) showed the presence of absorption bands at 3 440 cm～1～3 450 cm-1 and 1 640 cm-1～1 680 cm-1 , which are owing to the stretching vibrations of N - H and C = C of aromatics, with C- H out of plane (oop) bending vibrations at wavenumbers less than 900 cm-1, all of which are characteristic absorptions of porphyrin free base. The ultraviolet-visible data showed prominent peaks at ～400 nm(Soret band) and at wavelength ranges of 535 nm～550 nm(β-band) and 565 nm～ 600 nm (α-band) for the coal porphyrins analyzed. The geochemical significance of the metals and porphyrins in coal minerals are discussed.     

Multivariate classification based on metal contents in human senile cataract lenses

Multivariate classification methods were used to evaluate data on the concentrations of eight metals in human senile lenses measured by atomic absorption spectrometry. Principal components analysis and hierarchical clustering separated senile cataract lenses, nuclei from cataract lenses, and normal lenses into three classes on the basis of the eight elements. Stepwise discriminant analysis was applied to give discriminant functions with five selected variables. Results provided by the linear learning machine method were also satisfactory; the k-nearest neighbour method was less useful.