Magnetic silica colloids for catalysis

Monodisperse magnetizable colloidal silica particles in a stable dispersion have been functionalized with a homogeneous catalyst: a PCP–pincer Pd-complex. In a proof-of-principle experiment we demonstrate the catalytic activity of the colloids in a C–C bond formation reaction. Advantages of the magnetic silica carriers are the large surface-to-volume ratio and the easy recovery by magnetic separation. After magnetic separation, the catalyst-loaded particles are readily redispersed for further use.     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

TiO2 粉末催化剂光催化降解室内 空气中有机污染物

本文制备了一系列 TiO2粉末催化剂, 用光催化法降解室内空气中各种微量有机污染物,最终降解率 接近 100%. 考察了晶型对光催化剂性能的影响, 结果表明,锐钛矿型 TiO2 的催化性能最好. 最后,分析了 TiO2 光催化反应机理.     

Palladium-catalyzed C-N bond formation: synthesis of 1-aryl-1H-pyrazoles from β-bromovinyl aldehydes and arylhydrazines

Cyclic and acyclic β-bromovinyl aldehydes are cyclized with an array of arylhydrazines in toluene at 125 °C in the presence of a palladium catalyst and a phosphorus chelating ligand together with NaO^tBu to give 1-aryl-1H-pyrazoles in moderate to good yields.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

A high-resolution MAS NMR study on the potential catalysts Mo/HBeta for olefin metathesis: The interaction of Mo species with HBeta zeolite

The interfacial interaction of Mo species with the HBeta zeolite was studied by multinuclear MAS NMR, XRD and N₂ adsorption. As proved by the quantitative ²⁷Al MAS NMR, this interaction is so strong as to dealuminate the framework of HBeta, and leads to a new peak appearing at −14 ppm, which indicates the formation of crystalline Al₂(MoO₄)₃. This can also be detected by XRD measurements when the Mo loading is as high as 9.0 wt.%. The corresponding quantitative ²⁹Si and ¹H MAS NMR spectra show that the amount of silanols and Brønsted acidic sites decrease obviously with increasing Mo loading. This also reveals an interaction between Mo species and HBeta support through an oxygen bridge resulting from condensation with the hydroxyls on the support. At higher Mo loadings, the interaction is so strong that it results in an extraction of aluminum from the zeolite framework, and subsequently appearance of Al₂(MoO₄)₃ and loss of Brønsted acidic sites. These can be correlated to the low catalytic activity of Mo/HBeta in metathesis of ethylene and 2-butylene to propylene.     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006     

Structural studies on ruthenium(II) complexes used in interphase catalysis for the hydrogenation of ketones

Structural studies were performed on catalytically active ruthenium(II) complexes used in interphases, by means of XAFS spectroscopy. The EXAFS investigations indicate that the complexes retain their structural integrity when they are embedded on polysiloxane matrices to form stationary phase materials. The AXAFS studies reveal that the variations in the catalytic activity of the complexes with different ligands can be correlated to the differences in the electronic structure around the active ruthenium center. The EXAFS investigations show that, in asymmetric transfer hydrogenation reactions catalysed by ruthenium(II) complexes, the co‐catalyst plays a crucial role not only in enhancing the catalytic activity, but also in determining the structure of the intermediate species. Copyright © 2007 John Wiley & Sons, Ltd.