V2O5-MoO3-SiO2表面复合氧化物催化剂的制备与表征

采用表面改性法制备了V2O5-SiO2,MoO3-SiO2,V2O5-MoO3-SiO2复合氧化物催化剂,并用TPR和IR技术研究了催化剂的表面结构及V=O,M0=O的活性,同时用化学吸附IR技术研究了催化剂样品对异丁烷的化学吸附性能.实验结果表明:这些复合氧化物催化剂对异丁烷都有较高的化学吸附能力;SiO2能缓解表面Lewis碱位V=O和Mo=O的氧化能力,有利于选择氧化.     

以有机镍配合物为前体制备担载镍催化剂的研究

描述了以镍单核配合物ＮｉＣｐ２和簇合物Ｎｉ３Ｃｐ３Ｎ－ｔ－Ｃ４Ｈ９为前体的ＳｉＯ２载镍催化剂的制备，通过元素分析、ＴＲＲ、ＴＰＤＥ、ＸＰＳ，ＣＯ吸附和苯加氢反应对以镍配合物和簇合物为前体制备的催化剂的性能及其制备过程了研究和表征。结果表明，镍与合物和簇合物在担载过程中同载体ＳｉＯ２表面发生了相互作用，其化学组成发生了变化，在苯加氢反应中，此催化剂的活性比以Ｎｉ（ＮＯ３）２为前体制备的催化剂高得多，     

Raman study of structural defects in SiO2 aerogels

The structure of the silica aerogels was studied by Raman spectroscopy. The spectra of the solid network resembles that of bulk silica with additional bands related to organic groups and a large amount of OH groups.The typical bands due to ring breathing also called defect bands D ₁ and D ₂ located at 490 and 610 cm^–1 are present. However, the evolution of the D ₂ band compared to that of OH band (980 cm^–1) seems apparently, in contradiction with the results previously reported in the literature. During heat treatments between 25 and 300°C the D ₂ and the OH bands increase simultaneously. Generally, in silica glass the defect band D ₂ grows at the expense of the OH groups.This result is explained by the oxidation of the organic compounds which, in this temperature range, leads to the formation of the both species (OH) and those related to siloxane rings. ²⁹Si MAS NMR results are in agreement with the Raman study.     

介孔铁铝/蒙脱土复合材料：解离柱撑制备、结构及催化羟基化性能

利用极稀悬浮液中蒙脱土的解离作用并结合柱化技术过程，制备了介孔结构的铝铁/蒙脱土复合材料(Fe-Al/mmt)；并采用粉末X射线衍射、氮等温吸脱附、傅立叶红外光谱、紫外可见光漫反射光谱及苯酚催化羟基化反应表征了其结构和性能。结果显示，铁铝聚合前驱液中铁/铝比影响复合材料中蒙脱土的解离程度，且仅当低铁/铝比时(即Fe/(Fe+Al)物质的量的比介于0.05～0.3)，嵌入解离的蒙脱土片层间的混合铁铝物种呈现能耐温350 ℃的热稳定性；氮等温吸脱附分析反映出这种解离的蒙脱土堆积结构呈现介孔特征，孔径分布窄，介于2.0～2.3 nm；红外分析表明材料表面具有L酸和B酸位，并且L酸位量与嵌入解离的蒙脱土结构中的混合铁铝物种相关；由于结构中混合铁铝物种的存在及相应的Si-O → Fe、Al-O → Fe间的电子跃迁，Fe-Al/mmt材料在紫外区呈现宽泛的能量吸收特征。这些结果说明，由于混合铁铝物种嵌入于解离的蒙脱土片层堆积结构中，形成了“卡片屋”式介孔结构。实验条件下，Fe/(Fe+Al)物质的量的比为0.3的Fe-Al/mmt呈现较佳的催化羟基化性能，苯酚转化率为36.7%，二酚产物选择性32.3%；并且初步表明铝掺杂后，通过铁铝比和表面酸性的调整，材料的部分选择氧化性能可以得到改善。     

碳氟链与碳氢链表面活性剂在固液界面上的吸附

全氟辛酸及其钠盐和十二烷基硫酸钠在R972上的吸附等温线均为S型或LS型，指示固液界面吸附过程中有表面疏水缔合物生成．碳氟表面活性剂的饱和吸附量显著高于碳氢表面活性剂的饱和吸附量．加电解质于液相使各体系吸附量上升．对于碳氟表面活性剂，甚至引起吸附等温线类型变化．例如，不加电解质时全氟辛酸在R972上的吸附等温线为S型，而加入HCl（c＝0．05mol·dm－3）使吸附等混线变成LS型．全氟辛酸比全氟辛酸钠在R972上的吸附更强．几种表面活性剂在R972上的吸附均随温度升高而减少。应用两阶段吸附模型及通用吸附等温线公式可以很好地解释所得实验结果．     

硅氧聚合度对细胞毒性的影响

本文采用家兔肺泡巨噬细胞(AM)存活率和细胞过氧化脂质(LPO)值为测定指标,研究了硅氧的聚合度对其细胞毒性的影响。结果表明:各种聚合度的硅氧都有一定的细胞毒性,聚合度愈大,细胞毒性也愈大。胶体SiO_2的粒径增大,其细胞毒性降低。十硅酸盐及粒径小于5nm的硅溶胶的细胞毒性大于α-石英。聚合度小于6的低聚硅酸及其盐、粒径18nm以上的硅溶胶以及硅胶H的毒性皆小于α-石英。本实验细胞存活率降低和过氧化脂质值升高的趋势基本一致,这表明硅氧可能主要与细胞表面膜作用,膜上磷脂等表面活性物质被氧化和变性,从而导致细胞损伤。     

Stable silica gel-bound crown ethers. Selective separation of metal ions and a potential for separations of amine enantiomers

Silica gel-bound crown ethers and aza macrocycles have been synthesized with the attaching arm connected to the carbon framework of the macrocycles. The interactions of these bound macrocycles with cations are almost identical to those involving the analogous free macrocycles. This has allowed for predictable cation separation, concentration, and removal processes to be performed on a small scale. Quantum mechanical calculations and NMR measurements indicate that similarly bound chiral macrocycles will be capable of use in separating chiral organic amines.Dedicated to the memory of Professor James J. Christensen who died on 5 September 1987.     

Sol Gel Processing of Low Permittivity,Fiber-Reinforced SiO2-Polyimide Substrates

Low permittivity ceramic substrates with a sandwich structure consisting of a porous, fiber-reinforced SiO₂ core and two thin polymer plates were fabricated by sol-gel processing, and polymer infiltration. The rheological behavior of an aqueous colloidal SiO₂ sol, containing short SiO₂ fibers was studied as a function of particle loading, fiber loading and gelation time. Short SiO₂ fibers were introduced to limit drying shrinkage and thus minimize substrate cracking during drying. After the psuedoplastic sol was tape cast and sintered at 1150°C for 2 h, a polyimide solution was infiltrated into the porous SiO₂ core. Permittivities ranging from 1.81 to 3.08 could be obtained by using 32–42% SiO₂, 5–50% polyimide and 63 to 8% porosity. The substrate strength was increased from 1.93 MPa to 3.83 MPa after polyimide infiltration.     

酞菁键合硅胶的制备及分离取代酞菁异构体

制备和表征了一种新的酞菁键合硅胶，三-β-(辛巯基)-β-(磺酰胺基)-酞菁铜键合硅胶。研究了该键合酞菁硅胶作为HPLC固定相的基本色谱性能。实验结果表明，该固定相可以分离四-α-(2，2，4-三甲基-3-戊氧基)酞菁(铜、镍)的4种异构体，也可以观察到四-α-(2，2，4-三甲基-3-戊氧基)无金属酞菁的4种异构体，而商业C₁₈(VERTEX Eurospher)却只能观察到两组峰，表明这种酞菁键合硅胶固定相在分析、分离一些取代酞菁异构体方面比商业C₁₈具有更好的分离效果。     

表面含磷酸的介孔分子筛P-SBA-15的合成及其性能评价

采用后合成法，将磷酸固载在纯硅介孔分子筛SBA-15表面上。利用X射线衍射（XRD）、红外光谱（IR）、氮气吸附 脱咐法（BET）分析方法表征催化剂的物理性能。结果表明，催化剂P-SBA-15在高温焙烧后保持了稳定的介孔分子筛SBA-15结构，该催化剂的比表面积和孔径分别为605.45m2/g和5.576nm（磷硅摩尔比5%）。选用十一碳烯酸与异丙醇的酯化反应对催化剂P-SBA-15的催化反应性能进行评价，同时与其他几种微孔沸石分子筛催化剂催化性能相比表明，磷酸改性的介孔分子筛P SBA 15是合成十一烯酸异丙酯较为理想的固体酸催化剂，考察了催化剂的稳定性。