Analysis of the Association Process Between a Series of Phenol Derivatives with Two Novel Fluorinated Stationary Phase Using the Cl− Anion as Retention Marker

Summary Lithium chloride (LiCl) effect on the retention process of a phenol derivative series was investigated on two types of fluorinated stationary phase (i.e. a silica grafted with fluorinated linear alkyl chain (L-FSP) and a silica grafted with fluorinated aromatic ring stationary phase (A-FSP)). The results showed that the solute retention is enhanced when the A-FSP was used instead of the L-FSP due to additional – interactions. For the two fluorinated stationary phases (FSPs), the phenol-FSP association process can be divided into two LiCl concentration domains demonstrated that it was important to take into account the adsorbtion of Cl^– anion on the FSPs. As well, enthalpy-entropy compensation revealed that the solute retention mechanism was independent of the solute molecular structure and confirmed a change on the solute retention mechanism at a critical LiCl concentration value around 0.02M.     

Low volume sampling device for mass spectrometry analysis of gas formation in nickel-metalhydride (NiMH) batteries

Rechargeable nickel-metalhydride (NiMH) batteries have major advantages with respect to environmental friendliness and energy density compared to other battery systems. Research on thermodynamics and reaction kinetics is required to study the behaviour of these batteries, especially under severe operating conditions such as overcharging and (over)discharging. During these processes several reactions take place resulting in the formation of oxygen and hydrogen gas. Hence, the recombination processes should be well controlled to guarantee that the partial oxygen and hydrogen pressure inside the battery are kept low.Mass spectrometry is one of the analytical techniques capable of measuring the composition of gases released inside the battery during the charge and discharge processes. However, the sample gas needs to be withdrawn from the battery during the experiment. The gas consumption must be kept to a minimum otherwise the equilibrium inside the battery will be disturbed. A bench-top quadrupole mass spectrometer with a standard capillary by-pass inlet cannot be used for this purpose as its gas consumption is in the 1-10 ml/min range. In this paper, a new gas inlet device is presented that reduces gas consumption to a value <50 μl/h. The use of a capillary by-pass splitter and a discontinuous sampling procedure allow mass spectrometry to be used as a gas analysis tool in many applications in which small amounts of sample gas are involved.Experiments with standard AA-size NiMH batteries show that hydrogen release dominates during (over)charging at increased charging rates. Beside mass spectrometry, evolved gases are also analysed using Raman spectroscopy. Although some differences are observed, the results of similar experiments show a good agreement.     

Determination of binding sites in carboplatin-bound cytochrome c using electrospray ionization mass spectrometry and tandem mass spectrometry

Interaction of carboplatin with cytochrome c (Cyt. c) has been investigated by electrospray ionization mass spectrometry (ESI-MS) and tandem mass spectrometry (MS/MS). ESI-MS studies revealed that the ring-opened adducts of carboplatin with Cyt. c were formed in the stoichiometric ratio of 1:1 and 2:1 at pH 5.0 and 37 degrees C and in the stoichiometric ratio of 1:1 only at pH 7.0 and 37 degrees C. It was also found that Cyt. c could be cleaved by carboplatin at pH 2.5 and 50 degrees C. The cleaved fragments of Cyt. c were determined by ESI-MS and MS/MS analysis to be Glu66 approximately Met80, Ac-Gly01 approximately Met65, Glu66 approximately Glu104, Ac-Gly01 approximately Met80 and Ile81 approximately Glu104. The carboplatin prefers to anchor to Met65 first, then to Met80. To further confirm the binding site of Met, AcMet-Gly was used as the model molecule to investigate its interaction with carboplatin and its hydrolysis reaction. On the basis of species detected during the reaction monitored by ESI-MS, a possible pathway of the cleavage reaction was proposed.     

氢化物发生-原子荧光光谱法测定绞股蓝中痕量铋

研究了氢化物发生-原子荧光光谱法测定中草药绞股蓝中痕量铋的适宜条件,试验了不同的消解方式、酸介质和还原剂用量对测定铋的影响。在最佳测定条件下,铋的线性范围为0.1~200μg.L-1,检出限为0.095μg.L-1。样品分析结果的相对标准偏差为4.28%(n=6),加标平均回收率为99.5%。     

中药一枝黄花、黄连、天麻、蛇床子中8种微量元素的测定

采用原子吸收光谱仪对一枝黄花、黄连、天麻、蛇床子中Fe、Ca、Mg、Mn、Cr、Cu、Zn、Pb八种无机元素的含量进行了测定,为进一步研究其药理和用途提供基础。     

反相高效液相色谱法测定Arthrobacter sp.黄嘌呤氧化酶活性

报道了采用反相高效液相色谱法(RP-HPLC)测定节杆菌(Arthrobacter sp.)黄嘌呤氧化酶活性的有效方法. 将酶初提液与含有黄嘌呤的反应体系在37 ℃下反应20 min, 反应终止后通过HPLC测定产物尿酸生成量的变化来分析酶的活性. 通过流动相组成、pH和柱温等分离条件的优化, 确定了最佳的色谱检测条件以NH4H2PO4 (50 mmol/L, pH 7.5)溶液为流动相, 流速1 mL/min, 柱温25 ℃, 检测波长290 nm. 为深入研究微生物细胞内黄嘌呤氧化酶提供了高效检测手段.     

非水层状液晶的稳定性与相行为

水体系层状液晶已研究较久,非水层状液晶则是近十年来才得到发展。本文以层状液晶的相行为和~2H NMR测量,研究并比较了非水层状液晶十二烷基硫酸钠/正癸醇溶剂以甘油或甲酰胺为溶剂时体系的结构与稳定性。 表面活性剂十二烷基硫酸钠(BDH,简写SDS)经无水乙醇重结晶两次提纯。用铂环法测     

某些酚类的高温液相色谱行为

建立了高温液相色谱系统,在高温条件下,采用甲醇-水作为流动相,在Polymerx RP-1聚合物(PSDVB)色谱柱上考察了6种酚类样品的色谱行为.实验条件:温度40～160 ℃,流速0.2～5.5 mL/min,流动相中甲醇浓度范围40%～80%.考察了温度、流速和流动相组成对酚类样品的保留、分辨、柱效和系统压力的影响,探讨了酚类样品在聚合物柱上的热力学行为.温度升高2.35℃大约相当于流动相中甲醇浓度增加1%,可以通过改变色谱柱温度调节样品保留和改变选择性.柱温升高,降低了流动相的粘度,允许在高温条件下使用较高的流速实现快速分离.在160℃、V(甲醇):V(水)=40:60,为流动相和3 mL/min流速条件下,可于2.5 min内实现6种酚类的完全分离.     

SYNTHESIS OF FUNCTIONAL MACROMOLECULE INTERMEDIATE THROUGH ACYLATION CATALYZED BY [Emim]Cl-AlCl3 IONIC LIQUID

Acylation reaction of anthracene with oxalyl chloride in the presence of [Emim]Cl-AlCl3 ionic liquid has been investigated. Pure 1,2-aceanthryenedione, which is used as intermediate of functional aromatic polymer material, was obtained by recrystalling the reaction mixture with aether and was determined by GC/MS, 1↑HNMR and FTIR analysis. The influences of various parameters, such as the contents of AlCl3 in [Emim]Cl-AlCl3, the amount of acylation agent, amount of [Emim]Cl-AlCl3, reaction temperature and reaction time were investigated. The optimum conditions were as follows： the molar fraction of AlCl3 in ionic liquid [x（AlCl3）] being 0.67, molar ratio of ionic liquid to anthracene being 2：1, molar ratio of oxalyl chloride to anthracene being 2：1, reaction temperature being 40℃ and reaction time being 6h. Under above conditions, the yield and selectivity of 1,2-aceanthrylenedione can reach 91.5% and 98.3% respectively. Further more, [Emim]Cl-AlCl3 ionic liquid, compared with metal halides such as AlCl3, was found to catalyze the reaction as a novel environmental friendly catalyst and solvent and can be reused.     

An analysis of avidin, biotin and their interaction at attomole levels by voltammetric and chromatographic techniques

The electroanalytical determination of avidin in solution, in a carbon paste, and in a transgenic maize extract was performed in acidic medium at a carbon paste electrode (CPE). The oxidative voltammetric signal resulting from the presence of tyrosine and tryptophan in avidin was observed using square-wave voltammetry. The process could be used to determine avidin concentrations up to 3 fM (100 amol in 3 l drop) in solution, 700 fM (174 fmol in 250 l solution) in an avidin-modified electrode, and 174 nM in a maize seed extract. In the case of the avidin-modified CPE, several parameters were studied in order to optimize the measurements, such as electrode accumulation time, composition of the avidin-modified CPE, and the elution time of avidin. In addition, the avidin-modified electrode was used to detect biotin in solution (the detection limit was 7.6 pmol in a 6 l drop) and to detect biotin in a pharmaceutical drug after various solvent extraction procedures. Comparable studies for the detection of biotin were developed using HPLC with diode array detection (HPLC-DAD) and flow injection analysis with electrochemical detection, which allowed biotin to be detected at levels as low as 614 pM and 6.6 nM, respectively. The effects of applied potential, acetonitrile content, and flow rate of the mobile phase on the FIA-ED signal were also studied.