Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

Fluorinated monomer–styrene copolymer latex particles: I. kinetic studies in a soap-free aqueous medium

Soap-free emulsion copolymerization of 2, 2, 2-trifluoroethyl acrylate (3FEA) with styrene was carried out by using potassium persulfate as an initiator, and the effects of the weight fraction of 3FEA in the monomer feed on the kinetics and the particle size were investigated. Monomer conversions were followed by a gravimetric method, revealing that the overall polymerization rate increased exponentially with an increase in the weight fraction of 3FEA. According to dynamic light scattering measurement, the final particle size was found to decrease with an increase in the weight fraction of 3FEA. The number of particles for 3FEA homopolymerization was roughly twice as large as that at the fraction of 0.9, although both fractions had the almost same polymerization rates. These results indicate that soap-free emulsion homopolymerization of 3FEA would proceed not only inside the polymer particles but also in the aqueous phase throughout the polymerization.     

Graft copolymerization of methyl acrylate onto potato starch initiated by ceric ammonium nitrate

A study was made of the ceric ammonium nitrate (CAN) initiated graft copolymerization of methyl acrylate (MA) onto potato starch. The variables affecting the graft were investigated. The optimums have been obtained; they are the concentrations of MA, CAN, and nitric acid (HNO₃) (1.08, 5.0 × 10^?3, and 0.081 mol/L, respectively). The reaction temperature is ca. 50°C and the reaction time is 2 h. The molecular weight of grafted poly(methylacrylate) has been determined. On the basis of experimental results, the mechanism of grafting has been explored, a new kinetic equation of the graft copolymerization is established: R_p = Kk_d [STOH] [Ce⁴⁺] + Kk_pk_d/k_t[STOH][M], where K, k_d, k_p, and k_t are constants. The equation fits the results of experiments. © 1993 John Wiley & Sons, Inc.     

Optically active polymers containing side-chain photochromic moieties: Synthesis and chiroptical properties of copolymers of trans-4-(phenylazo)-1-naphthyl acrylate and trans-4-(1-naphthylazo)-phenyl acrylate with (?)-menthyl acrylate

The synthesis of photochromic optically active copolymers from trans-4-(phenylazo)-1-naphthyl acrylate (PANA), or trans-4-(1-naphthylazo)-phenyl acrylate (NAPA), and (?)-menthyl acrylate (MtA) is described. The copolymers prepared, having different contents of trans-phenylazonaphthalene moieties, have been characterized by IR, ¹H-NMR, UV, and GPC techniques. The chiroptical properties have been investigated by circular dichroism (CD) and the induced optical activity on the side-chain trans-phenylazonaphthalene chromophores discussed in terms of different conformational situations of the macromolecules in both the copolymer series. © 1994 John Wiley & Sons, Inc.     

PHOTO-INDUCED DOPED POLYANILINE BY THE VINYLIDENE CHLORIDE AND METHYL ACRYLATE COPOLYMER AS PHOTO ACID GENERATOR

The emeraldine base form of polyaniline (PANI) can be doped by a photo-induceddoping method. In this method a copolymer of vinylidene chloride and methyl acrylate(VCMAC) was used as photo acid generator which can release proton when it is exposedto ultraviolet light (λ= 254 nm). The structure of PANI-VCMAC system before and afterirradiation was characterized by elemental analysis, IR, XPS, and SEM images. Resultsobtained indicate that the photo-induced doping characteristics, such as doping positionand type of charge carriers, are similar to that of PANI doped with HCl. The poor room-temperature conductivity (～10~(-5)S/cm) of PANI-VCMAC system after irradiation maybe due to low doping degree (～pH= 3) and the difference in morphology as compared withPANI-HCl film.     

UV curable epoxy acrylate-clay nanocomposites

UV curable epoxy acrylates were reinforced with two different organically modified montmorillonites (MMTs) and an unmodified MMT. Conversion and rate of polymerization was monitored by real time infrared spectroscopy (RTIR) and photo-DSC. Microstructures were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and optical clarity. Optical clarity of the films containing clay was quite good as only a slight decrease was observed. Physical properties of the reinforced films were examined by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), hardness and tensile testing. Enhancements in glass transition temperature (T_g), thermal stability and mechanical properties were observed. The films reinforced with the unmodified MMT exhibit the most significant enhancements in properties.     

Preparation and characterization of a viscosity index improver for naphthenic and paraffinic base oils

Copolymers of -methyl styrene and 2-ethylhexyl acrylate were prepared in a benzene solution. The presence of the copolymers were confirmed by solubility, IR and NMR tests. The molecular weight and the polydispersity of the polymers were estimated by GPC. The copolymers obtained were blended with paraffinic and naphthenic base oils. The viscosity, the viscosity index (VI) the Q value as well as the stability to shear and oxidation were obtained for these blends. The results are compared with the results obtained with an oil blend containing a commonly used high temperature additive. Two of the copolymers obtained have shown to be good alternatives for specific applications.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

NMR analysis of the microstructure of poly(methyl acrylate-co-N-vinylcarbazole)

The microstructure of a series of high conversion copolymers of methyl acrylate (MA) and N-vinylcarbazole (NVC) was characterized by NMR. ¹H- and ¹³C-NMR spectra were assigned by comparison to the homopolymers and by using heteronuclear shift correlation spectroscopy. MA-centered triad distributions were obtained from the carbonyl carbon. Distributions of NVC sequences were determined from aromatic carbons 1 and 8a, and aromatic proton 1 These experimentally determined sequence distributions were compared to those calculated from reactivity ratios approximated from the copolymer compositions. Agreement was very good for low NVC content copolymers. Three signals were particularly useful in providing rapid assessment of the distribution of NVC units within low NVC content copolymers: proton 1 and carbon 1 of NVC and the carbonyl carbon of MA. © 1992 John Wiley & Sons, Inc.     

硅胶负载钯催化剂对丙烯酸甲酯的催化加氢性能研究

本文报导一种新法制备的硅胶负载钯催化剂,其活性组份大部分负载于载体的表面。该催化剂在常温常压下对丙烯酸甲酯的液相加氢反应,即有很高的活性和良好的重复使用性能。 催化剂按下法制备:在圆底烧瓶中加入1.00g硅胶和20mL甲醇,抽真空置换出硅胶孔内的空气,在搅拌下加入一定浓度的吸附质(聚乙烯亚胺、正丙胺、正丁胺等),在25℃反应3—4小时,过滤,固体经甲醇充分洗涤后和一定浓度的氯化钯甲醇溶液反应6小时。过     

规整链球型含C_(60)聚(丙烯酸β-羟乙酯)的合成及其在水中的自组装

Ｃ60 由于其独特的物理化学性质 ,在生命科学中引起了人们的广泛兴趣 .例如 :水溶性Ｃ60 的羧酸衍生物 ,羟基取代Ｃ60 ,Ｃ60 的氨基酸水溶性衍生的合成已有报道[1～ 3] ,并被用来研究Ｃ60 的生物化学及医学活性 .Ｔｏｋｕｙａｍａ[4 ] 等合成了酶功能化Ｃ60及与核酸连接的Ｃ60 ,研究并证明了它的细胞毒性及Ｇ 选择ＤＮＡ切割能力等生化活性 .Ｆｒｉｅｄｍａｎ[5]等合成了水溶性Ｃ60 的羧酸衍生物 ,研究了它对ＨＩＶ 1艾滋病毒的抑制作用 ,此外 ,关于不同Ｃ60含量的Ｃ60 蛋白质衍生物的合成及性质的研究也有报道[6] .Ｃ60 是一个直径为 0 71…