Packings and stationary phases for biopolymer separations by HPLC

Summary Packings and stationary phases applied to high resolution separations of proteins, enzymes, and nucleic acids must satisfy a series of distinct criteria that are different from those usually required by HPLC of low molecular weight non-biologically active analytes. These requirements have been met through substantial improvements in classical gel media together with novel developments in silica supports, and have led to a family of products with tailor-made and reproducible properties. Supports consisting of cross-linked organic gels, and inorganic materials (mostly silicas) are now available with graduated particle sizes, pore sizes, porosities and surface areas as well as non-porous beads. A whole range of stationary phases, such as reversed phase, hydrophobic interaction, ion exchanger and affinity packings, were designed for application as chemical sensors for biopolymer recognition in adsorptive chromatography. The phase systems are operated in the gradient mode, giving high resolution and high peak capacities. In addition, aqueous liquid-liquid partitioning systems have been developed for the fractionation of proteins and nucleic acids. Size exclusion media complete the set of HPLC variants enabling a discrimination of proteins according to their size and shape in an isocratic elution mode. Basically, protein purification and isolation is a multistage process where-by the HPLC variants are combined in a logistic sequence, utilizing the different selectivities of the phase systems and thus maximising resolution, speed and throughput.     

Comparison of gas chromatographic and gas chromatographic/mass spectrometric techniques for the analysis of TNT and related nitroaromatic compounds

The use of capillary column gas chromatography and gas chromatography/mass spectrometry for the analysis of a series of standard solutions (0.1 to 10 μg/ml) of 2,4,6-trinitrotoluene (TNT) and eight other nitroaromatic components was evaluated. The techniques included gas chromatography with electron capture detection (GC/ECD), full scan and selected ion monitoring gas chromatography/mass spectrometry with electron impact ionization (EI/FS and EI/SIM), full scan and selected ion monitoring gas chromatography/mass spectrometry with positive ion chemical ionization using methane reagent gas (PICI/FS and PICI/SIM), and full scan and selected ion monitoring gas chromatography/mass spectrometry with negative ion chemical ionization using methane reagent gas (NICI/FS and NICI/SIM). The performance of the techniques was comapared by determining the linear response range, precision, and detection limits of the analyses.     

A photometric flow measurements method for characterisation of HPLC pumps

Summary The measurement of flow constancy and pulsation amplitudes of HPLC pump based on the photoconversion of malachite green leucocyanide is described. The irradiation time and hence the degree of conversion of the leucocyanide is correlated to flow fluctuations of piston driven HPLC pumps. It is possible to measure the amplitude of pulsations and determine the constancy of the flow rate. Most of the pumps show a flow stability better than ±1% measured as relative standard deviation of the flow rate under HPLC conditions (pressure drop 100 bar at 1 ml/min flow rate). The most expensive pump of those tested showed less than ±0.5% flow instability, however, this result was achieved by installation of a large-volume pulsation damper. The method described also allows flow rate measurements under FIA conditions where there is little or no pressure drop at the pump outlet.     

高效液相色谱-电感耦合等离子体质谱法同时测定化妆品中5种含溴防腐剂

建立了同时测定化妆品中苯扎溴铵、2-溴-2-硝基-1,3-丙二醇、5-溴-5-硝基-1,3-二■烷、甲基二溴戊二腈、溴氯芬5种含溴防腐剂的高效液相色谱-电感耦合等离子体质谱法(HPLC-ICP-MS)。样品经含0.1%甲酸的甲醇溶液超声提取后,采用Agilent Eclipse-C_(18)(150 mm×4.6 mm,5μm)色谱柱分离,以0.1%甲酸-甲醇为流动相进行梯度洗脱,ICP-MS测定组分中的~(79)Br,以保留时间定性,外标法定量。5种含溴防腐剂均在0.5～100 mg/L范围内线性关系良好(r0.999),检出限为1.5～3.0μg/g,不同基质化妆品中的回收率为91.2%～108%,相对标准偏差(n=6)为1.3%～4.2%。该方法快速、准确、灵敏、专属性强,适用于化妆品中5种含溴防腐剂的定性定量分析。     

离子交换树脂负载Ni—B无定形合金催化剂的制备与性能

制备了一种新型离子交换树脂负载的Ｎｉ－Ｂ无定形合金催化剂．用３种树脂作为催化剂载体，即弱酸型阳离子树脂Ｄ１５２，强酸型阳离子树脂Ｄ７２及强碱型阴离子树脂Ｄ２６１．用ＸＰＳ、ＴＥＭ和ＩＣＰ等技术对催化剂进行了表征．结果表明，催化剂上镍与带有功能基的载体树脂之间有着很强的相互作用，但其强度与所带的功能基有关．３种催化剂Ｎｉ２ｐ３／２的ＸＰＳ谱图上，ＮｉＢ／Ｄ１５２催化剂的氧化态峰最小，而ＮｉＢ／Ｄ２６１的氧化态峰最大．异丙醇脱氢反应活性实验证实了这一结果．     

毛细管气相色谱法测定兰索拉唑中有机溶剂残留量

以N,N-二甲基甲酰胺(DMF)为溶剂,丁酮为内标,采用PV-101毛细管色谱柱 (30 m×0．22 mm),氢火焰离子化检测器,建立兰索拉唑中五种有机溶剂甲醇、乙醇、丙酮、二氯甲烷、乙酸乙酯残留量的定量分析方法。五种有机溶剂检出限分别为0．002 4％,0．002 4％, 0．001 2％,0．000 6％,0．000 6％;在10-1000 mg·L-1浓度范围内,各组分线性关系良好;对应的平均回收率分别为100．8％±3．6％,102．1％±2．3％,99．97％±4．1％,99．63％±2．7％, 102．3％±3．5％。     

LC-ESI-MS Determination of Bilobalide and Ginkgolides in Canine Plasma

A sensitive and selective method using liquid chromatography with electrospray ionization mass spectrometric detection was developed for the quantification of bilobalide and ginkgolides in canine plasma. The analytes were extracted with diethyl ether-dichloromethane-isopropanol (6:3:1, v/v) after spiking the samples with daidzein (internal standard). The lower limit of quantification (LLOQ) of the method was 2.5 μg L⁻¹ for ginkgolide B and 10.0 μg L⁻¹ for bilabolide, ginkgolide A and ginkgolide C. The accuracy of the method was within 15% of the actual values over a wide range of plasma concentrations. The intra-day and inter-day precision was better than 15% (R.S.D.). Finally, the LC-ESI-MS method was successfully applied to study the pharmacokinetics of ginkgolides and bilabolide after administration of Ginkgo biloba extracts to dogs.     

柱后衍生-荧光检测高效液相色谱法快速测定鲜牛奶中链霉素残留量

牛奶样品经磷酸溶液提取，提取液用苯磺酸阳离子交换柱和C18固相萃取柱净化，链霉素残留液用甲醇从C18固相萃取柱上洗脱，经旋转蒸发器减压蒸干，残渣用0．01mol／L庚烷磺酸钠溶液溶解，用柱后衍生-高效液相色谱荧光检测器在激发波长263nm和发射波长435nm测定．方法线性范围为0.01～0．10mg／kg；在0．01～0．10mg／kg范围，三个添加水平的回收率为78．3％～80．2％，变异系数(CV)为7．4％～12．4％，方法检出限为0．005mg／kg．     

旋转薄层色谱分离聚合物

报道了旋转薄层色谱分级聚合物，及配合直接扫描密度法测定分子量分布的结果．在旋转薄层硅胶板上用混合溶剂成功地分离并直接收集了聚苯乙烯２１个级分，分子量测定结果与ＧＰＣ法基本一致．初步认为旋转薄层色谱以薄层吸附色谱分离机理为基础，采用连续注入流动相和旋转薄层板离心力相结合的方式，改善并加快了分离效果     

吹扫-捕集气相色谱法测定水中挥发性卤代烃

研究建立了吹扫 捕集法富集样品 ,利用HP 1大口径厚液膜通用型熔融石英毛细管柱 (30m× 0 .5 3mm×2 .6 5 μm) ,ECD检测器 ,测定水中 10种挥发性卤代烃的方法 ,确定了最佳吹扫 捕集条件 .结果表明 :水样体积为 5mL时 ,标准偏差在 0 .0 2～ 0 .0 7μg L之间 ,变异系数在 1.0 9%～ 3.2 8%之间 ,加标回收率为 94.0 %～ 10 7%之间 ,10种物质的检出限在 0 .0 7～ 0 .19μg L之间