桑蚕丝素蛋白初始结构对其矿化作用的影响

以碱金属离子诱导桑蚕丝素蛋白溶液发生构象转变, 研究了蛋白质初始结构对其矿化作用的影响. FT-IR, XRD和SEM等测试结果显示, 未经任何处理的桑蚕丝素蛋白溶液矿化后形成片状复合物, 其无机相以二水磷酸氢钙(DCPD)为主; 而经过K^＋和Na^＋金属离子处理后, 桑蚕丝素溶液的结构由无规线团/螺旋构象向β-折叠发生转变, 矿化后成纤维状, 并相互结合呈现纳米级的三维多孔结构, 其无机相以热力学稳定的羟基磷灰石(HA)为主. 可以认为, 丝素蛋白结构转化为较伸展的β-折叠后, 使得更多的亲水基团暴露在外面, 在丝素蛋白分子不断凝聚成纤过程中, HA结晶快速生长并附着在这些微纤上, 最终形成纤维状的丝素蛋白/HA复合物. 该结果为阐明蛋白质的生物矿化过程及其调控机理提供了理论依据, 同时可以从矿化复合物的形成来反映这些微量元素可能对骨组织形成的影响, 为临床骨组织的修复提供一定的参考.     

Expression and Purification of ZNF191（243-368） in Three Expression Systems

ZNF191 （243-368）, a new human zinc finger protein, probably relates to some hereditary diseases and cancers, To obtain adequate amount of ZNF191（243-368） for the study of its property, structure and function, three different expression systems of inclusion-body, glutathione S-transferase （GST）, and hexahistidine （6 × His） were used and compared. Among these systems, the expression level of ZNFI91（243-368） was increased in inclusion body system under a higher isopropylthio-β-D-galactoside （IPTG） concentration, but the non-target proteins were also increased more, which made its purification more difficult and the yield lower. The expression of His-tag fusion protein was almost not affected by IPTG concentration, temperature and inducing time. At a high IPTG concentration the highest expression yield for GST fusion protein was obtained. And the fusion proteins can be partially purified by a single affinity chromatography step. The fusion protein systems show advantages for expression of these proteins.     

依波西隆蓝与蛋白质作用的共振光散射光谱及其分析应用

微量蛋白质对依波西隆蓝的共振光散射产生增强作用，且增强程度与蛋白质浓度有良好的线性关系，由此建立了测定蛋白质的灵敏共振光散射分析方法。利用该方法测定合成样品和血清样品中的蛋白质，均获得了可靠的分析结果。     

Determination of total mercury in environmental and biological samples by flow injection cold vapour atomic absorption spectrometry

A simple and accurate method has been developed for the determination of total mercury in environmental and biological samples. The method utilises an off-line microwave digestion stage followed by analysis using a flow injection system with detection by cold vapour atomic absorption spectrometry.

The method has been validated using two certified reference materials (DORM-1 dogfish and MESS-2 estuarine sediment) and the results agreed well with the certified values. A detection limit of 0.2 ng g⁻¹ Hg was obtained and no significant interference was observed. The method was finally applied to the determination of mercury in river sediments and canned tuna fish, and gave results in the range 0.1–3.0 mg kg⁻¹.     

Measurement and modeling of the glass transition temperatures of multi-component solutions

Protein crystals are usually grown in multi-component aqueous solutions containing salts, buffers and other additives. To measure the X-ray diffraction data of the crystal, crystals are rapidly lowered to cryogenic temperatures. On flash cooling, ice frequently forms affecting the integrity of the sample. In order to eliminate this effect, substances called cryoprotectants are added to produce a glassy (vitrified) state rather than ice. Heretofore, the quantity of cryoprotectant needed to vitrify the sample has largely been established by trial and error. In this study, differential scanning calorimetry (DSC) was used to measure the melting (T_m), devitrification (T_d) and glass transition (T_g) temperatures of solutions with a range of compositions typical of those used for growing protein crystals, with the addition of glycerol as cryoprotectant. The addition of cryoprotectant raises the T_g and lowers the T_m of bulk solution thereby decreasing the cooling rates required for vitrification of protein crystals. The theoretical T_g value was calculated using the apparent volume fraction using the Miller/Fox equation extended for multi-component systems. The experimental values of T_g were within approximately ±4% of that predicted by the model. Thus, the use of the model holds the promise of a rational method for the theoretical determination of the composition of cryoprotectant requirement of protein crystallization solutions.     

High-level expression of soluble human β-defensin-2 fused with green fluorescent protein in Escherichia coli cell-free system

Human β-defensin-2 (hBD2), a small cationic peptide, exhibits a broad range of antimicrobial activity and does not acquire any microbial resistance. To produce this uneasily detectable, degradable, and toxic polypeptide efficiently, an alternative approach based on the Escherichia coli cell-free biosynthesis system was proposed. The approach implies that a polypeptide of interest is synthesized as a fusion protein linked to a green fluorescent protein (GFP) through a cleavable spacer. With batch-mode operation, a significant amount of hBD2 fused with GFP (0.25 mg/mL) can be expressed in this cell-free system. The productivity of the fusion protein can be improved up to 1.2 mg/mL by employing a continuous-exchange cell-free system. Furthermore, the GFP moiety provides directly visible and quantitative monitoring of the polypeptide synthesis, and the product is soluble and stable. This work will be helpful in allowing the rapid and visible expression of other similar defensins using an in vitro cell-free system.     

Classification of cultivation area of ginseng by near infrared spectroscopy and ICP-AES

A rapid and nondestructive near infrared (NIR) method using soft independent modeling of class analogy (SIMCA) for the classification of cultivation area (Korea and China) was evaluated and confirmed. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of ginseng samples were also investigated to find out the differences between Korean samples and Chinese samples. These differences make NIR spectroscopic method viable. The average value of each Korean and Chinese ginseng sample for crude fiber, crude protein, starch, and 10 inorganic constituents were measured and compared with F-test and t-test. The inorganic constituents were also measured by induced coupled plasma-atomic emission spectroscopy (ICP-AES). It could be found that the amount of starch and ten inorganic elements for example Na, Mg, P, K, Ca, Mn, Fe, Ni, Cu and Zn in ginseng samples are considerably different based on cultivation area. SIMCA has been applied to the inorganic data to investigate the possibility of ICP-AES as classification tool. However, it was observed that the result was not equal to than NIR spectra data. The overall results showed the availability of NIR method using SIMCA would be adequate for classification of cultivation of ginseng, since NIR spectra includes useful and various information on chemical properties in spite of broad and overlapped bands.     

Electrochemical Study of the Lipid‐Transfer Protein

Electrochemical study of barley grain lipid‐transfer protein (LTP) revealed that it may belong to the metal‐binding protein class. Using differential pulse polarography the presence of Cu(II) and Zn(II) ions in the native LTP structure was proved, as well as its affinity for binding Ni(II) ion. Application of a more sensitive electroanalytical technique, such as anodic stripping voltammetry with analyte preconcentration, revealed the presence of Pb(II) and Cd(II) ions and also enabled the following Hg(II) ion binding. Possible biological role of LTP in plant stress response and its contribution to barley phytoextraction potential are discussed.     

Synthesis of functionalized rab GTPases by a combination of solution- or solid-phase lipopeptide synthesis with expressed protein ligation

Prenylated proteins with non-native functionalities are generally very difficult to obtain by recombinant or enzymatic means. The semisynthesis of preparative amounts of prenylated Rab guanosine triphosphatases (GTPases) from recombinant proteins and synthetic prenylated peptides depends largely on the availability of functionalised prenylated peptides corresponding to the proteins' native structure or modifications thereof. Here, we describe and compare solution-phase and solid-phase strategies for the generation of peptides corresponding to the prenylated C terminus of Rab7 GTPase. The solid-phase with utilisation of a hydrazide linker emerges as the more favourable approach. It allows a fast and practical synthesis of pure peptides and gives a high degree of flexibility in their modification. To facilitate the analysis of semisynthetic proteins, the synthesised peptides were equipped with a fluorescent group. Using the described approach, we introduced fluorophores at several different positions of the Rab7 C terminus. The position of the incorporated fluorescent groups in the peptides did not influence the protein-ligation reaction, as the generated peptides could be ligated onto thioester-tagged Rab7. However, it was found that the positioning of the fluorescent group had an influence on the functionality of the Rab7 proteins; analysis of the interaction of the semisynthetic Rab7 proteins with REP (Rab escort protein) and GDI (guanosine diphosphate dissociation inhibitor) molecules revealed that modification of the peptide side chains or of the C-terminal isoprenoid did not significantly interfere with complex formation. However, functionalisation of the C terminus was found to have an adverse effect on complex formation and stability, possibly reflecting low structural flexibility of the Rab GDI/REP molecules in the vicinity of the lipid-binding site.