The preparation of thick-film glass capillary columns

A detailed method for the routine preparation of glass capillary columns is presented. The method consists of coating a glass tube with quartz powder prior to pulling the tube into a capillary. The inner surface of the capillary consists of an even distribution of quartz particles fused to the walls. This surface has been found readily deactivated by standard procedures and ideal for the preparation of thick-film glass capillary columns. The method has been thoroughly tested in two independent laboratories to ensure that the procedures described are reproducible.     

The sintering of silica aerogels studied by thermoporometry

The evolution of the texture of silica aerogels during sintering is studied by thermoporometry for both neutral and base catalysed materials.During the densification the macroporous volume drops and the analysis of the mesopore size distribution evolution shows that the collapse of the smallest mesopores is responsible for the macropore volume transformation. However, corrections of the measured volumes are necessary to characterize the most compliant materials.     

Preparation of Nano-Sized γ-Al2O3 Supported Iron Catalyst for Fischer-Tropsch Synthesis by Solvated Metal Atom Impregnation Methods

Two types of small iron clusters supported on γ-Al2O3-RT(dehydroxylated at room temperature) and γ-Al2O3-800 (dehydroxylated at 800 ℃) were prepared by solvated metal atom impregnation (SMAI) techniques. The iron atom precursor complex, bis(toluene)iron(0) formed in the metal atom reactor, was impregnated into γ-Al2O3 having different concentrations of surface hydroxyl groups to study the effect of surface hydroxylation on the crucial stage of iron cluster formation. Catalysts prepared in this way were characterized by TEM, M(o)ssbauer, and chemisorption measurements, and the results show that higher concentration of surface hydroxyl groups of γ-Al2O3-RT favors the formation of more positively charged supported iron cluster Fen/γ-Al2O3-RT, and the lower concentration of surface hydroxyl groups of γ-Al2O3-800 favors the formation of basically neutral supported iron cluster Fen/γ-Al2O3-800. The measured results also indicate that the higher concentration of surface hydroxyl groups causes the rapid decomposition of precursor complex, bis(toluene)iron(0), and favors the formation of relatively large iron cluster. Consequently, these two types of catalysts show different catalytic properties in Fischer-Tropsch reaction. The catalytic pattern of Fen/γ-Al2O3-RT in F-T reaction is similar to that of the unreduced α-Fe2O3 and that of Fen/γ-Al2O3-800 is similar to that of the reduced α-Fe2O3.     

Influence of ion-exchange and impregnation modification of zeolite X on its catalytic properties in the alkylation of toluene with methanol

The dependence of the activity and selectivity of ion-exchanged forms of zeolite X with incorporated cesium process in alkylation of toluene with methanol in the side chain on the nature of the ion-exchanged cations (Na⁺, Cs⁺, Mg²⁺, Zn²⁺) has been established. It is shown that introduction of Mg²⁺ and Zn²⁺ in combination with Cs₂CO₃ significantly increased the yields of ethylbenzene and styrene in comparison with their yields on alkali forms of zeolite X. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 1, pp. 33–38, January–February, 2006.     

Reducing methane formation in methanol to olefins reaction on metal impregnated SAPO-34 molecular sieve

SAPO-34 silicoaluminophosphate molecular sieve produces large amounts of methane at elevated temperatures in the methanol to olefins (MTO) process. This significantly reduces the lower olefins selectivity a key factor in determining the commercial viability of this catalyst. Impregnation of the SAPO-34 molecular sieve with metal ions such as K, Cs, Pt, Ag and Ce was found to reduce the amount of methane significantly at higher temperatures thereby increasing the lower olefins selectivity. This observed effect is less apparent at lower temperatures where the amount of methane formed is generally low. This revised version was published online in June 2006 with corrections to the Cover Date.     

石墨烯/硫酸铅复合材料的制备及其在铅酸电池中的电化学性能

利用简单的浸渍法制备了石墨烯/硫酸铅复合材料,使得硫酸铅可以直接用作铅酸电池负极材料。该复合材料分别以100 mA·g^-1、200 mA·g^-1和300 mA·g^-1电流密度放电时,平均放电比容量分别可达到110、94和69 mAh·g^-1,而硫酸铅仅为49、5和0.5 mAh·g^-1,显示出复合材料在高倍率充放电下更好的比容量和再接受充电能力。循环伏安测试表明石墨烯的电容效应随扫描速率增大而增强,同时析氢也变得严重,使得复合材料在充放电过程中充电效率比纯硫酸铅低20%。在充放电过程中,石墨烯能够提高硫酸铅1倍以上的放电容量,并将充电电压提高0.1 V。XRD和SEM结果显示硫酸铅均匀分布在石墨烯片层上,没有出现团聚现象。     

Supercritical Carbon Dioxide-Based Processes in Photocatalytic Applications

Conventional methods generally used to synthesize heterogeneous photocatalysts have some drawbacks, mainly the difficult control/preservation of catalysts’ morphology, size or structure, which strongly affect the photocatalytic activity. Supercritical carbon dioxide (scCO₂)-assisted techniques have recently been shown to be a promising approach to overcome these limitations, which are still a challenge. In addition, compared to traditional methods, these innovative techniques permit the synthesis of high-performance photocatalysts by reducing the use of toxic and polluting solvents and, consequently, the environmental impact of long-term catalyst preparation. Specifically, the versatility of scCO₂ allows to prepare catalysts with different structures (e.g., nanoparticles or metal-loaded supports) by several supercritical processes for the photocatalytic degradation of various compounds. This is the first updated review on the use of scCO₂-assisted techniques for photocatalytic applications. We hope this review provides useful information on different approaches and future perspectives.     

Chinese Journal of Catalysis Graphical Contents

Chin. J. Catal., 2014, 35: 1911–1916 doi: 10.1016/S1872‐2067(14)60208‐4 Dehydrogenation of primary aliphatic alcohols to aldehydes over Cu‐Ni bimetallic catalysts Tianliang Lu, Zhongtian Du, Junxia Liu, Chen Chen, Jie Xu * Dalian Institute of Chemical Physics, Chinese Academy of Sciences; University of Chinese Academy of Sciences     

焙烧温度对1,4-丁烯二醇加氢Cu/Raney-Ni催化剂结构和性能影响

在Ni-Al合金粉上浸渍硝酸铜溶液,经不同温度焙烧得到Cu改性Ni-Al合金粉,采用质量分数10%NaOH溶液浸渍上述改性合金粉得Cu/Raney-Ni催化剂。采用EDX、XRD、N_2吸附-脱附、TEM和NH_3-TPD等手段表征了Ni-Al合金粉及相应Raney-Ni催化剂的元素含量、晶体结构、孔结构特征、表面形貌和表面酸碱性,并以1,4-丁烯二醇加氢制1,4-丁二醇为探针反应,考察了焙烧温度对Raney-Ni催化剂加氢性能的影响。表征分析表明,焙烧温度500℃所制备的CRT500催化剂比表面积较大,为64.96m~2/g;弱酸中心比例较高,达81.2%。结果表明,焙烧温度升高,BED可实现完全转化,BDO选择性和收率均先升高后降低。其中,CRT500加氢性能较好,BED转化率为100.00%,BDO选择性为61.88%。进一步升高焙烧温度,催化剂RCT550和RCT600的BDO选择性和收率反而降低,这是由于高温下催化剂易发生团聚或烧结。结合催化剂表征可知,CRT500具有较好的加氢性能,这与该催化剂具有合适的Ni/Al物质的量比(3.84)、弱酸中心所占比例较大和活性组分Ni分散性好等因素有较大关联。     

Characterization and catalytic behavior of silica-supported copper catalysts prepared by impregnation and ion-exchange methods

Two kinds of Cu/SiO₂ catalysts were prepared by impregnation (IM) and ion-exchange (IE) methods, and tested in dehydrogenation of 2-butanol to methyl-ethyl-ketone. Some kinds of Cu²⁺ on the IE catalyst could not be reduced during the reaction, and it produced the butene. The copper oxide over the IM catalyst could be reduced during the reaction, and showed stable dehydrogenation activity for 2-butanol.