具有低SO_2氧化活性的Pt/Zr_xTi_(1-x)O_2柴油车氧化催化剂的制备及性能

采用共沉淀法制备了一系列ZrxTi1-xO2(x=0.0,0.1,0.5,0.9,1.0)复合氧化物,并以此为载体,用等孔体积浸渍H2PtCl6制得Pt/ZrxTi1-xO2柴油车氧化催化剂.运用N2吸附-脱附,X射线多晶粉末衍射,X射线光电子能谱,H2程序升温还原和NH3程序升温脱附等手段对催化剂进行了表征.结果表明,在系列催化剂样品中,Zr0.1Ti0.9O2复合氧化物主要以锐钛矿形式存在,具有较好的织构性能,样品的比表面积达94m2/g,孔体积为0.33cm3/g.相应地,Pt/Zr0.1Ti0.9O2催化剂表现出优异的催化氧化性能,HC和CO的起燃温度(T50)分别为185和174oC,完全转化温度(T90)分别为197和201oC;且具有较低的SO2氧化活性,350oC时SO2仅转化25.5%.     

TEPA在SBA-15(P)上的嫁接形态及其对CO2吸附性能的影响

通过控制浸渍方法和其过程将四乙烯五胺(TEPA)负载到SBA-15原粉上制备氨基功能化的CO2吸附材料TEPA/SBA-15(P).利用X射线衍射(XRD)、氮吸附、元素分析和傅里叶变换红外(FTIR)光谱等手段对各种吸附材料进行表征分析,并对其CO2吸附能力进行评价.结果表明:TEPA乙醇溶液的动态浸渍过程可以使有机胺高度均匀地负载到SBA-15(P)的孔道内,并形成有利于CO2吸脱附的键合形式.提出了TEPA在SBA-15(P)上的键合作用机制,一方面TEPA的端基氨(-NH2)与载体中的表面羟基(-OH)和醚键(C-O-C)形成氢键,提高了TEPA的分散度;另一方面,TEPA乙醇溶液的动态浸渍过程有效地避免了TEPA分子间或分子内氢键的形成,从而使有机胺TEPA氨基官能团具有较高的吸附容量.     

Ni/γ-Al2O3催化剂的2-MF气相加氢合成2-MTHF性能研究

2-甲基四氢呋喃(2-MTHF)是极具市场潜力的生物燃料、绿色溶剂和化学中间体.采用浸渍法制备Ni/γ-Al2O3催化剂,在固定床反应器评价其2-甲基呋喃(2-MF)气相加氢合成2-甲基四氢呋喃(2-MTHF)反应性能.通过XRD、N2等温吸附-脱附、H2-TPR、NH3-TPD、TEM、H2吸附和XPS对催化剂结构和表面性质进行表征,研究Ni负载量、焙烧温度和反应条件对催化剂性能的影响规律.结果表明:Ni/γ-Al2O3催化剂的Ni金属面积、晶粒尺寸、反应温度和压力都会影响2-MF的转化率;孔结构、酸量和反应温度是影响2-MTHF选择性的主要原因,平均孔径大、酸量大和适宜的反应温度有利于提高2-MTHF选择性. 400℃焙烧的负载量为15%的Ni/γ-Al2O3催化剂, Ni金属面积大、晶粒尺寸小、总酸量多,催化剂表面的金属活性中心与酸性中心协同作用促进了2-MF呋喃环上C=C加氢生成2-MTHF,性能较优.在2 MPa、100℃、WHSV=2.7 h-1、H2/2-MF=6.4的条件下,该催化剂上2-MF转化率为99.8%, 2-MTHF选择性为98.0%,催化剂可以稳定运行40 h.     

聚合物改性水玻璃均相杂化液对速生杨木的改性

将丙烯酰胺单体在钠水玻璃溶液中聚合制成水玻璃-聚丙烯酰胺均相杂化液,通过浸渍法使杂化液与速生杨木材复合,制成无机/有机木材复合材。SEM、FT-IR表征了速生杨木与杂化前驱液复合前后的结构和形貌变化,研究了复合木材的热稳定性及力学性能的变化,结果表明,用该均相杂化液改性的复合木材WPG为31.6%时,其氧指数为50.3%;并且与素材的力学性能相比,复合木材的抗弯曲强度较素材提高了11.2%,弹性模量提高了18.2%,其径面、弦面和端面的硬度分别提高了15.6%、17.3%和26.2%。     

超临界二氧化碳渗透技术的研究进展

综述超临界ＣＯ２ 渗透技术的原理、机理以及应用。利用超临界ＣＯ２ 渗透技术可以制备缓释装置、聚合物催化剂、聚合物纳米材料、聚合物金属膜和共混物等     

超临界CO_2溶胀聚合物的研究及其应用

本文介绍超临界CO2 溶胀聚合物的研究及其应用 ,包括聚合物与超临界CO2 相互作用 ,溶胀行为的理论模型以及溶胀后的聚合物的用途 ,如制备微孔聚合物材料、渗透小分子和超临界溶胀聚合等     

Hydrogenolysis of glycerol over HY zeolite supported Ru catalysts

An enhanced active and selective catalyst consisting of ruthenium supported on dealuminated HY zeolite has been prepared by a wet impregnation method. It was found that BET surface area of Ru/HY catalysts significantly increases after HCl treatment. This treatment also increases the concentration of strong acid sites in the catalyst. The hydrogenolysis of glycerol over 5 wt% Ru/HY catalyst was investigated at 190-220 ℃, an initial H2pressure of 3-6 MPa, and in 20 wt% glycerol aqueous solution. The results indicate that HCl treated Ru/HY catalyst shows higher activity compared with the untreated Ru/HY catalyst, and that the glycerol hydrogenolysis efficiency is influenced by the porosity and acidity of the support. A selectivity to 1,2-PDO of 81.3% at a glycerol conversion of 60.1% under 3 MPa H2pressure and 220 ℃ for 10 h was achieved over the modified Ru/HY catalyst with a 1.0 mol/L HCl treatment. It has also been shown that a longer reaction time, a higher temperature and a higher H2pressure have the positive effects on the glycerol hydrogenolysis efficiency of the enhanced Ru/HY.     

Pt-doped semiconductive oxides loaded on mesoporous SBA-15 for gas sensing

SBA-15-based solids combining semiconductive oxides (Sn and In) and noble metal (Pt) were prepared by an incipient wet impregnation method in order to obtain materials for gas sensing. The materials were characterized by XRD, BET adsorption, SEM, and TEM. The BET analysis allowed obtaining details about the specific surface areas, pore size, and modifications due to the indium and/or tin oxides followed by the Pt deposition. XRD data revealed that In₂O₃ did not enter the mesopores of SBA-15, preventing also the entrance of the Pt nanoparticles in the mesopores. On the other hand, SnO₂ nanoparticles further doped with Pt could enter the mesoporous network, affording a SBA-15 material loaded with SnO₂ and very small Pt nanoparticles with high dispersion. Tablets obtained by pressing the modified SBA-15 were tested as sensitive materials for propene and hydrogen detection.     

Pd-Cu/ZrO2催化CO2加氢制甲醇的性能

采用溶胶-凝胶法制备了n(Cu):n(Zr)=1:1、1:2、1:4和1:8的Cu/ZrO₂催化剂。 实验结果表明,当n(Cu):n(Zr)=1:4时,催化剂表现出较高的CO₂转化率(8.0%)和甲醇选择性(59.5%),为了增加CO₂的转化率,提高甲醇选择性,在n(Cu):n(Zr)=1:4的催化剂中添加质量分数1%的Pd,采用浸渍法制备了Pd-Cu/ZrO₂催化剂。 在250 ℃、2 MPa、12000 mL/(g·h)和V(H₂):V(CO₂)=3:1的反应条件下,CO₂转化率和CH₃OH收率相比Cu/ZrO₂催化剂(n(Cu):n(Zr)=1:4)分别提高了40.0%和80.9%。 通过X射线衍射仪(XRD)、傅里叶变换红外光谱仪(FT-IR)、N₂吸附-脱附(BET)、X射线光电子能谱仪(XPS)和程序升温还原化学吸附仪(H₂-TPR)等仪器表征证明Pd的添加提高了催化剂的分散性和比表面积。 催化剂中Pd和Cu之间强相互作用,使Cu2p轨道结合能向低处偏移,还原温度的降低,说明Pd-Cu/ZrO₂催化剂还原能力增强,使得CO₂加氢活性提高。     

Iron oxide nanoparticles stabilized inside highly ordered mesoporous silica

Nanosized iron oxide, a moderately large band-gap semiconductor and an essential component of optoelectrical and magnetic devices, has been prepared successfully inside the restricted internal pores of mesoporous silica material throughin-situ reduction during impregnation. The samples were characterized by powder XRD, TEM, SEM/EDS, N₂ adsorption, FT-IR and UV-visible spectroscopies. Characterization data indicated well-dispersed isolated nanoclusters of (Fe₂O₃) _n , within the internal surface of 2D-hexagonal mesoporous silica structure. No occluded Fe/Fe₂O₃ crystallites were observed at the external surface of the mesoporous silica nanocomposites. Inorganic mesoporous host, such as hydrophilic silica in the pore walls, directs a physical constraint necessary to prevent the creation of large Fe₂O₃ agglomerates and enables the formation of nanosized Fe₂O₃ particles inside the mesopore