Peculiarities of rheological behavior of filled polymer melts in uniaxial stretching

The peculiarities of theological behavior of filled polymer melts in uniaxial extension in a wide range of strain rates (from 2× 10^–5 to 1 × 10^–1 s^–1) have been studied. Linear polyethylene and 1,4-polybutadiene containing up to 21.5 vol.% of carbon black, silica, calcium carbonate or glass fibers were used. It has been found that the transition from uniform to nonunion stretching due to the neck formation is typical of all specimen compositions, when they approach steady-state straining. Depending on the structure and rheological characteristics of the compositions general conditions for this transition have been established. The general regularities for varying the rheological characteristics of filled polymers in the course of their uniform stretching have been recognized. These regularities depend on the molecular characteristics of the polymer matrix and the presence in the compositions of the structural framework of high disperse filler or the network formed by the entangled fibers. Using polyethylene compositions it has been shown that the introduction of small amounts of disperse or fibrous fillers can give rise to acceleration of the relaxation process in filled polymers.     

Multidetector Thermal Field‐Flow Fractionation as a Novel Tool for the Microstructure Separation of Polyisoprene and Polybutadiene

For the first time, it is demonstrated that thermal field‐flow fractionation (ThFFF) is an efficient tool for the fractionation of polyisoprene (PI) and polybutadiene (PB) with regard to molecular microstructure. ThFFF analysis of 1,4‐ and 3,4‐PI as well as 1,4‐ and 1,2‐PB samples in tetrahydrofuran (THF), THF/cyclohexane, and cyclohexane reveals that isomers of the same polymer family having similar molar masses exhibit different Soret coefficients depending on microstructure for each solvent. The separation according to microstructure is found to be based on the cooperative influence of the normal and the thermal diffusion coefficient. Of the three solvents, cyclohexane has the greatest influence on the fractionation of the isomers. In order to determine the distribution of isomeric structures in the PI and PB samples, the samples are fractionated by ThFFF in cyclohexane and subsequently analyzed by ¹H NMR. The isomeric distributions determined from NMR data correlate well with ThFFF retention data of the samples and thus further highlight the unique fractionating capabilities of ThFFF. The interplay of the normal and thermal diffusion coefficients that are influenced by temperature and the mobile phase opens the way to highly selective fractionations without the drawbacks of column‐based separation methods.

     

喹啉醛亚胺钴配合物催化丁二烯顺式-1,4选择性聚合

合成和表征了一系列以[NN]双齿喹啉醛亚胺为配体的二氯化钴配合物（1a~6a）。 以X射线单晶衍射技术分析了配合物2a、3a和4a的分子结构。 配合物2a和3a以单核四配位（2个氮原子和2个氯原子）的形式结晶,而配合物4a由于取代基空间位阻小,则以双核的形式结晶。 在倍半乙基氯化铝（EASC）的活化下,该催化体系引发丁二烯单体聚合,得到顺式-1,4结构含量高达98%的聚丁二烯。 催化剂催化活性随配体上取代基吸电子能力的增加而提高,但随取代基空间位阻的增加而降低。 所合成的聚丁二烯具有高相对分子质量(Mn约为2.0×105)和窄的相对分子质量分布（Mw/Mn＜2.7）。     

Phase equilibrium and diffusion of solvents in polybutadiene: A capillary‐column inverse gas chromatography study

The capillary‐column inverse gas chromatography method was used to measure the diffusion and partition coefficients of ethylbenzene, styrene, and acrylonitrile in polybutadiene (PBD) at infinite dilution of the solvents. Experiments were performed over a temperature range of 50–125 °C. At temperatures well above the glass‐transition temperature of PBD, the diffusivities were correlated using an Arrhenius expression. The Arrhenius parameters in turn were intercorrelated and shown to be a function of the occupied volume, thus providing a method for predicting the diffusion of other solvents in the same polymer. Further, the activation energy was predicted using the Duda‐Vrentas free‐volume approach. The activation energy thus obtained was compared with the activation energy of the Arrhenius approach. The weight‐fraction activity coefficient data were compared to the predictions of the group contribution, lattice‐fluid equation‐of‐state, and the UNIquac Functional‐group Activity Coefficient (UNIFAC) free‐volume models. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1046–1055, 2002     

Extent of branching from linear viscoelasticity of long‐chain‐branched polymers

We present new results and examine literature data concerning the linear viscoelastic behavior of polyethylene with sparse to intermediate levels of long‐chain branching (LCB). These branched polymers displayed a common rheological signature, namely, a region of frequency‐independent loss tangent along with the corequisite scaling of the storage and loss moduli to the same frequency exponent. This apparent power‐law response occurred within a finite frequency window and bore resemblance to the behavior of physical gels. The appearance of this region, however, was the consequence of the presence of two distinct, yet partially overlapping, terminal relaxation processes. After considering the analogous relaxation behavior of wholly linear polymers with bimodal molecular weight distributions, we considered the polymers with LCB as blends of linear and branched species to develop a simple method of quantifying the extent of LCB. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1671–1684, 2004     

Effect of selected structural parameters of styrene–butadiene block copolymers on their compatibilization efficiency in polystyrene/polybutadiene blends

The effects of the block length and block number of linear styrene–butadiene (S–B) block copolymers on their compatibilization efficiency in blending polystyrene with polybutadiene were studied. For this purpose, two sets of model S–B copolymers and both homopolymers were prepared by anionic polymerization. Diblocks, triblocks, or pentablocks of S–B copolymers were blended with these homopolymers, and the structures and some end‐use properties of the blends were determined. The supramolecular structure (determined by small‐angle X‐ray scattering), morphology (determined by transmission and scanning electron microscopy), and stress‐transfer characteristics (impact and tensile strengths) of the blends were chosen as criteria for the compatibilization efficiency of the copolymers used. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2612–2623, 2002     

用反相气相色谱法测定端羟基聚丁二烯的溶解度参数

用反相气相色谱法测定了端羟基聚丁二烯(HTPB)在50、60和70℃下的溶解度参数δ_2,经线性外推得到25℃时δ_2=9.13。估计了HTPB与九种溶剂相互作用参数的熵项X_S。     

Control of thermal cross‐linking reactions and the degree of crystallinity of syndiotactic 1,2‐polybutadiene

Thermal stability, crystallization, morphological development, subsequently melting, and crystallinity control of a syndiotactic 1,2‐polybutadiene sample were carefully carried out by thermogravimetry (TGA), polarized optical microscopy (POM), differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), and wide‐angle X‐ray diffraction (WAXD), respectively. The experiments indicate that thermal cross‐linking reaction rates under nitrogen protection and in air are different for this polymer at temperature above 155 °C. Under nitrogen protection, the thermal cross‐linking reaction rate is delayed and the mechanism of melt crystallization obtained from the DSC results is in good accordance with that from POM observation. TMDSC results indicate that melting–recrystallization–melting model is more proper to explain the double melting events of this sample. At the same time, the evolution of the degree of crystallinity as the function of the time was investigated by WAXD profiles for the samples firstly crystallized at 145 °C for 1 h and then kept at 163 °C mediated between the temperatures of the double peaks. It shows that as prolonging the annealing time at 163 °C thermal cross‐linking reactions possibly occur, leading to gradual reduction of the apparent crystallite sizes, evaluated by Scherrer equation and the degree of crystallinity. The changing sequence of the relative intensity of the stronger four diffraction peaks with time due to thermal cross‐linking reactions is (111)/(201) > (210) > (010) > (200)/(110). © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2885–2897, 2005     

Synthesis,isolation, and thermal behavior of polybutadiene grafted with poly(2,3,4,5,6‐pentafluorostyrene)

2,3,4,5,6‐Pentafluorostyrene (PFS) was copolymerized with polybutadiene (PB) in tetrahydrofuran using benzoyl peroxide as the initiator at 50, 60, and 80 °C. The copolymerizations follow typical radical polymerization kinetics and behavior. The grafting parameters were evaluated as a function of monomer conversion, initiator concentration, and/or temperature by gel permeation chromatography of directly injected copolymerization mixtures. The grafting efficiencies and grafting ratios are most consistent with a system that terminates by combination and whose graft sites are generated by hydrogen abstraction of allylic radicals by primary initiator radicals. Pure graft copolymers were isolated by extracting unreacted PB into hexanes and PPFS homopolymer into acetone. The similarity of the glass transition temperatures of the PPFS grafts and the corresponding extracted PPFS homopolymers confirms that their lengths are approximately equal. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2874–2891, 2005     

Association of polybutadiene living anions in cyclohexane

Simultaneous measurements of static and dynamic light scattering were made for cyclohexane solutions of living polybutadiene (PB) anion to characterize PB components existing in the solutions. There were two relaxation modes in the relaxation time spectra obtained by dynamic light scattering. The static structure factor and hydrodynamic radius of the major fast relaxation component obtained are explained by the unimer‐tetramer equilibrium model. The same model is also consistent with the data of the propagation reaction rate of the PB living anion in cyclohexane. The slow relaxation component is only minor (less than 1 wt %), but has a large radius of gyration of ca. 200 nm, and is assigned to aggregates consisting of a huge number of PB living anion chains. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1401–1407, 2005