[Bmim]Br3对酮的选择性单溴化反应

在无溶剂和室温条件下, 三溴化1-丁基-3-甲基咪唑([Bmim]Br₃)选择性地与酮反应, 以90%～96%的产率生成相应的α-溴代酮. 该方法反应条件温和、产率高、选择性好、环境友好.     

Synthesis of N-（α-Alkoxyalkyl）benzotriazoles Catalyzed by Acidic Ionic Liquid at Room Temperature

N-（α-Alkoxyalkyl）benzotriazoles were synthesized via the condensation of benzotriazole with various aldehydes and alcohols catalyzed by acidic ionic liquid [hmim]HSO4 at room temperature. The yield was up to 99%. This novel method was effective when triethoxymethane was utilized instead of alcohols. Moreover, acidic ionic liquid could be reused easily with no significant degradation of its catalytic activity.     

烷基吡啶及氯化铝正负离子结构的密度泛函研究

采用量子化学密度泛函方法对N-烷基吡啶阳离子和阴离子AlCl4-,Al2Cl7-和Al3Cl10-进行了全优化计算,得到了阴阳离子的几何构型和净电荷分布.计算发现,吡啶环上的电子数符合4n 2规则,具有芳香性.吡啶阳离子的LUMO轨道主要由环上原子的2pz所贡献,是反键π分子轨道.AlCl4-,Al2Cl7-和Al3Cl10-的HOMO轨道主要由Cl原子的2px所贡献.推测吡啶阳离子的LUMO与阴离子的HOMO相互作用形成离子液体分子.     

超临界流体化学热力学

本文简要介绍了超临界流体的基本概念和性质，评述了化学热力学在超临界萃取、超临界态化学反应、超临界流体制备材料等方面的作用和研究进展，讨论了二氧化碳-离子液体两相体系的热力学行为。     

氯铝酸室温离子液体介质中正碳十二烯选择环化反应

 在氯化1－丙基－3－甲基咪唑（PMImCl）、氯化1－丁基－3－甲\r\n基咪唑（BMImCl）、氯化1－丁基吡啶（BPCl）和溴化1－乙基吡啶（E\r\nPBr）季铵盐与AlCl3构成的室温离子液体介质中，首次发现正十二碳烯\r\n（简称十二烯）可以高选择性地发生环化反应生成环十二烷．依次在反\r\n应管中加入氯铝酸室温离子液体、乙醇和十二烯，其中AlCl3的量为0．\r\n01mol，AlCl3与季铵盐的摩尔比为2，乙醇为10ml，十二烯为2ml（9．\r\n3mmol）．当反应体系中不添加乙醇时，十二烯转化率和环十二烷选择\r\n性仅分别为4．2％和73．1％．这是由于十二烯和氯铝酸离子液体形成\r\n两相体系而不易充分接触，故十二烯转化率和环十二烷选择性较低．当\r\n反应体系中加入乙醇时，十二烯和氯铝酸离子液体体系变为单相，使得\r\n十二烯和氯铝酸离子液体可以充分接触，十二烯转化率和环十二烷选择\r\n性可分别达到12．4％和82．9％．压力对提高十二烯转化率和环十二烷\r\n选择性有很大的影响．p（N2）＝3．0～6．0MPa下反应12h，十二烯转\r\n化率和环十二烷选择性可分别达到27．2％和93．8％．反应结束后加热\r\n除去乙醇，产物自动与离子液体分层，便于分离，且离子液体介质可重\r\n复使用．     

超强酸性室温离子液体反应介质中烷烃羰化研究

在卤化1-烷基吡啶和1-甲基-3-烷基咪唑季胺盐与无水AlCl_3组成的超强酸性 氯铝酸室温离子液中，首次实现了烷烃与CO的直接羰化反应。2，2，4-甲基戊烷可 直接与CO反应，产物为酮。     

Neue schnelle Ionenleiter vom Typ MMIIICl6 (MI = Li,Na, Ag; MIII = In,Y)

Novel Fast Ion Conductors of the Type M M^IIICl₆ (M^I = Li, Na, Ag; M^III = In, Y) The ternary chlorides Li₃InCl₆, Na₃InCl₆, Ag₃InCl₆, and Li₃YCl₆ have been studied by difference scanning calorimetry, high-temperature X-ray, infrared, and high-temperature Raman methods. Impedance spectroscopic measurements exhibit fast ionic conductivity increasing in the sequence Na₃InCl₆ < Li₃YCl₆ < Ag₃InCl₆ < Li₃InCl₆. In the range of 300°C, Li₃InCl₆ is the best lithium ion conductor known so far (σ = 0,2 Ω^?1 cm^?1 at 300°C). With the exception of Na₃InCl₆, the chlorides exhibit complicated order-disorder phase transitions.     

Trigonal-planare CuX3-Gruppen in Cu2Mo6X14, X = Cl,Br, I

Trigonal Planar CuX₃-Groups in Cu₂Mo₆X₁₄, X = Cl, Br, I Cu₂Mo₆Cl₁₄ (I), Cu₂Mo₆Br₁₄ (II) and Cu₂Mo₆I₁₄ (III) were synthesized by thermal treatment of corresponding mixtures of copper(I) and molybdenum(II) halides. The crystal structures were determined by single crystal X-ray analyses. I and II show isotypism, cubic, Pn3 (no. 201, sec. setting), Z = 4, I: a = 12.772(3) Å, II: a = 13.350(2) Å. III shows a new structural type, orthorhombic, Pbca (No. 61), Z = 4, a = 16.058(3) Å, b = 10.643(2) Å, c = 16.963(3) Å. Trigonal planar CuX₃ units were found in I? III. Structural behaviour relations are discussed, especially with regard to ionic conductivity.     

A potentiometric investigation of the hydrolysis of chromate (VI) ion in NaCl media to 175°C

The hydrolysis of chromate ion was studied potentiometrically in a concentration cell fitted with hydrogen electrodes by titrating basic NaCl–Na₂CrO₄ solutions with standardized HCl against a NaOH reference solution. The temperature was varied from 25 to 175°C at 25° intervals at the following ionic strengths (I): 0.1140, 0.2346, 0.5337, 0.9988, 2.940, and 5.239 (NaCl). Depending on the ionic strength, the molality of total chromium was varied from 0.001 to 0.100. The resulting titration curves could be resolved best in terms of three equilibria involving the formation of HCrO ₄ ^– (aq), Cr₂O^3– (aq), and CrO₃Cl^– (aq). The equilibrium quotients for all three reactions were fitted as a function of temperature and ionic strength, and the molal thermodynamic parameters that were computed from these relationships are tabulated at specific ionic strengths over the experimental temperature range.     

基于金属介导和离子液体的新型绿原酸印迹整体柱的制备及评价

选用1-乙烯基-3-乙基咪唑四氟硼酸盐([VElm]BF4,一种离子液体)作为功能单体,以Co2+为介导离子,结合1-丁基-3-甲基咪唑四氟硼酸盐([BMIM]BF4)/二甲基亚砜(DMSO)二元致孔体系制备了绿原酸印迹整体柱。经过对制备参数的考察,确定最佳比例为绿原酸:Co2+:[VElm]BF4:EDMA(乙二醇二甲基丙烯酸酯)(摩尔比)=1:1:5:20,[BMIM]BF4:DMSO=3:1(V/V),最大印迹因子达2.10。通过优化色谱条件,最终在乙腈:20 mmol/L乙酸钠缓冲液(pH 4.2)=70:30(V/V)时实现了绿原酸及其类似物的完全分离。由此可见,以离子液体为功能单体及致孔剂,在金属介导策略下制备的分子印迹聚合物可实现绿原酸的特异性识别及分离。