RuO2·xH2O / MWNTs纳米复合物的超级电容特性研究

本文采用超声波技术合成了水合氧化钌/多壁碳纳米管纳米复合材料(Ru-MWNTs)前驱物，在150 ℃下热处理15 h后得到Ru-MWNTs。采用XRD及TEM对纳米复合材料进行表征，结果表明，水合氧化钌以无定型态比较均匀地沉积在MWNTs上。在1.0 mol·L^-1 H₂SO₄电解液中对Ru-MWNTs复合电极进行了电化学测试，循环伏安结果表明纳米复合物具有良好的电容性能，其比容量为100 F·g^-1，是MWNTs的6倍(MWNTs的比容量为15.5 F·g^-1)；本文还采用交流阻抗方法来分析频率与电容的关系，比较分析了MWNTs和复合材料的孔结构，表明在MWNTs中复合少量的水合氧化钌可以提高电极材料的充、放电速度。     

2,4,6-三硝基苯酚改性锆铝复合氧化物固定相分离富勒烯的色谱性能研究

制备了用于分离C60和C70的2，4，6－三硝基苯酚改性锆铝复合氧化物高效液相色谱固定相，考察了流动相中甲苯的含量、柱温及流速对C60和C70分离的影响，同时比较了酸腐蚀前后锆铝复合氧化物基质对分离的影响，结果表明，2，4，6－三硝基苯酚改性酸腐蚀后锆铝复合氧化物填料对富勒烯表现出较强的分离能力，具有作为富勒烯制备分离的潜力。     

Ag／Al2O3选择性催化丙烯还原氮氧化物表面反应机理的原位红外光谱研究

 在富氧条件下Ag／Al2O3对以丙烯为还原剂选择性催化还原NOx的反应有很高的催化活性．本实验成功地利用原位红外光谱分析手段,在真实的催化反应条件下,探讨了丙烯选择性还原NOx的反应机理,证实了催化剂表面反应中间体Al－NCO和Ag－NCO虽在真空中稳定,但在实际反应条件下极为活泼．催化剂表面上R－ONO和R－NO2分解成NCO是整个反应的速度控制步骤．这一结论与在真空系统条件下对其反应机理的研究结果一致,证明了在这一反应体系中两种研究方法的相关性．同时本实验还从反应机理上探讨了催化剂的水蒸气中毒现象．水蒸气的存在阻碍了催化剂表面R－ONO和R－NO2的生成,并进一步阻碍了反应的速度控 制步骤,即R－ONO和R－NO2向Al－NCO和Ag－NCO的转化,但这是一种完全可逆的暂时中毒现象．结合相应的催化剂活性评价结果对表面反应机理进行了讨论．     

用CuO／γ－Al2O3催化剂同时脱除烟气中的SO2和NO

 研究了用CuO／γ－Al2O3催化剂同时脱除烟气中的SO2和NO，并在固定床反应器中考察了反应条件对其催化活性的影响．结果表明，温度和SO2对CuO／γ－Al2O3的催化活性均具有双重影响．新鲜催化剂和硫化催化剂上最适宜的脱硝温度分别为250～300℃和300～450℃，最适宜的n（NH3）／n（NO）约为1．2．烟气中的氧可大大提高CuO／γ－Al2O3的脱硫脱硝活性．综合考虑吸附硫容和NO脱除率，CuO／γ－Al2O3同时脱硫脱硝的最适宜温度为350～450℃．温度和SO2在高温区对CuO／γ－Al2O3活性的影响源于两者对NH3氧化活性的改变，高温下CuO／γ－Al2O3的活性下降是因为NH3氧化加剧；SO2通过使催化剂硫化生成硫酸盐来抑制NH3氧化，从而提高CuO／γ－Al2O3的活性．吸硫饱和的催化剂可于5％NH3中还原再生，再生后其硫容较初始时降低，但其活性大幅度提高．     

非晶态NiP（B）／Al2O3催化一氧化碳，水和氧气合成过氧化氢

Hydrogenperoxideisagreenoxidantwithgreatpotentialformuchapplication .Thepresentproduc tionofhydrogen peroxiderequiressevereconditionsand generates pollutants .AlternativesynthesesarerequiredandthesynthesisofH2 O2 fromCO ,H2 OandO2 isverypromising .AsshowninEq(1) ,thesynthesisisthermodynamicallyfavored :CO +H2 O +O2 H2 O2 +CO2 (1)ΔG02 98=- 134kJ/mol　　ThereactionwasfirstreportedbyZudinetal[1]whousedpalladiumtriphenylphosphaneasacatalyst.Bianchietal[2 ] usedabiphasesystemforthesynthe …     

硅基多孔氧化铝模板非水电沉积CdS纳米线的研究

纳米材料,包括尺寸为纳米量级的超细微粒?线?薄膜?量子阱和超晶格等引起了人们广泛的重视 [1,2] ?其中 , 半导体纳米微粒和由其构成的纳米固体结构开辟了材料科学研究的新领域?硫化镉 (CdS) 作为一种重要的Ⅱ - Ⅵ族无机半导体材料 , 具有独特的光电性质 , 在光电化学电池和多相光催化反应中都有广泛应用?近年来 , 已有大量关于合成 CdS 纳米结构的文献报导 [3～12] , 所采用的方法如反胶束法?单分子膜法?自组装法以及电化学沉积法等 , 其中非水电解与模板技术相结合的制备方法引起了人们高度的重视并且被广泛的采用?自从 Baranski 等在上…     

CuZnAl水滑石衍生催化剂上甲醇水蒸气重整制氢Ⅰ. 催化剂焙烧温度的影响

 以类层柱CuZnAl水滑石为前体,经不同温度焙烧制备了一系列甲醇水蒸气重整制氢催化剂. 在250 ℃、 水/甲醇比1.3和重时空速2.5 h-1下的反应结果表明, 600 ℃焙烧的催化剂具有优异的活性和稳定性,而≤500 ℃和≥700 ℃焙烧后的催化剂活性较差. 热重、 X射线衍射、 傅里叶变换红外光谱和程序升温还原分析结果表明, 600 ℃焙烧时水滑石分解较为完全,析出纳米CuO粒子的同时伴生CuAl2O4尖晶石相,进而在反应过程中对金属Cu纳米粒子和ZnO起到良好的隔离和稳定作用. 焙烧温度≥700 ℃时CuO纳米粒子发生二次团聚,同时CuAl2O4尖晶石相大量生成,造成催化活性位减少,活性较低; 而焙烧温度≤500 ℃时水滑石分解不完全,生成 (Cu,Zn)AlxOy(CO3)z复合物且无尖晶石相伴生,造成反应中金属Cu纳米粒子和ZnO聚集,导致催化剂活性较低.     

Role of the C3-substituted derivatives of cinchonidine in the enantioselective hydrogenation of ethyl pyruvate on Pt-alumina catalyst in AcOH

Summary The enantioselective hydrogenation of ethyl pyruvate (EtPy) was studied on Pt-alumina catalysts modified by C3-substituted cinchonidines (NC, A, B, C1, C2in Fig. 1) and for comparison by DHCDand MeO-DHCDin AcOH. The effect of the C3-substituent on the reaction rate and the enantioselectivity were examined. Using the Engelhard 4759 catalyst under mild experimental conditions (room temperature, hydrogen pressure 1 bar) such as DHCDthe (R)-ethyl lactate formed in excess (e.e.max: 79-91%)</o:p>     

Morphological and structural change of nano-pored alumina membrane above 1200 K

The transition and the change in pore morphology of a porous alumina membrane prepared by anodically oxidizing aluminum in sulfuric acid were studied mainly by TG-DTA, TMA, dilatometry and TEM. At ca. 1243 K, TMA showed an expansion followed by contraction; the CO₂ and SO₂ gases were quickly discharged, and the pore morphology of the as-prepared porous membrane (ca 150 mm-t, with pores ca 25 nm in diameter and containing ca 11% by mass of SO₂) showed an abrupt change, but the pores were retained to ca. 1573 K. Sulfur incorporated in the membrane was lost in two stages, i.e., at ca 1243 K and in a range up to 1373 K. Isothermal measurements revealed the complex crystallization of the amorphous phase into polycrystalline phase. This revised version was published online in August 2006 with corrections to the Cover Date.     

New hybrid chelating sorbents with grafted 3-aminopropionate groups based on mixed silicon,aluminum, titanium,or zirconium oxides

A series of new hybrid organo-inorganic sorbents with the 3-aminopropionate chelating group was synthesized. The synthesis includes the copolycondensation (sol—gel method) of tetraethoxysilane, 3-aminopropyltriethoxysilane, and several modifiers (MeSi(OEt)₃, EtSi(OEt)₃, Ti(OEt)₄, AlONO₃, ZrOCl₂) followed by carboxyethylation with acrylic acid. The obtained chelating sorbents were characterized by elemental analysis, FT-IR and ¹H NMR spectroscopy, and thermogravimetry. The N-carboxylated sorbents have a higher sorption capacity with respect to metal ions (0.5–0.9 mmol g⁻¹, pH 6.3, NH₄OAc, 20 °C) than the starting sorbents with the primary amino group (0.05–0.2 mmol g⁻¹) and manifest high selectivity for copper(II) ion extraction. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1783–1788, August, 2005.